Amorho B08PJGHQYW LED Mirror Installation Guide
- June 17, 2024
- Amorho
Table of Contents
Amorho B08PJGHQYW LED Mirror
Product Information
Specifications
- Dimensions: 3.94” x 3.94” vertically and horizontally
- Methods: Method1, Method2
- Orientation: Vertically and Horizontally
Product Usage Instructions
Setting Up
- Place the product on a flat surface.
- Ensure that the product is oriented either vertically or horizontally based on your preference.
- Select the desired method of operation (Method1 or Method2).
Operation
To operate the product:
- If using Method 1, follow the specific steps outlined for that method.
- If using Method 2, follow the instructions provided for that method.
- For vertical orientation, ensure the product is positioned upright.
- For horizontal orientation, place the product flat on its side.
FAQ
- Q: How do I switch between vertical and horizontal orientation?
- A: To switch between vertical and horizontal orientation, simply rotate the product accordingly.
- Q: Can I use both Method 1 and Method 2 simultaneously?
- A: No, the product is designed to operate using either Method 1 or Method 2 at a time.
About Installation
- Please wear suitable goggles when drilling.
- Be careful when using power tools near the water.
Recommendations for residual current devices RCD
- Be careful with hidden cables or pipes.
- If you need to drill on the surface of the tile, please be careful to prevent the drill bit from slipping off. Stick a piece of tape on the wall to prevent the drill bit shift before marking the fixing holes.
- Do not place very hot or cold items on or near the glass surface, unless adequately insulating materials are used to prevent such items touch the glass. The mirror glass’s nominal thickness is 4mm. If the mirror glass is broken please contact us in time (Ledmirrorlight@outlook.com).
- This product should be kept away from curtains and other fabrics. Do not cover the mirror with anything because the energized product will be heated. We recommend that you close it after using it, please do not open it for a long time.
- It will be more dangerous if it is installed incorrectly. (Please keep this user manual for future reference.)
About Wiring
This product is manufactured in the class I category and requires an earth
connector.
Also, we will provide an additional 1.5m US 2-pin plug for easy connection
with existing wall sockets.
About Working Status
When the touch switch backlight is blue, it means the function is on; when the
touch switch backlight is white, it means the function is off. Closed state;
(when defogging is needed, it is not suitable to run for a long time)
Compliance
- All electronic components used in these products are UL-listed
Package
- Wall mount pendants*2
- Expansion bolts*4
- Screws*4
- User manual*1
Please check whether the accessories are all in the package before installation.
Install Tools Needed( not included)
- Drill
- Tape measure
- Phillips screwdriver
- Maker pen
- Spirit level
- Goggles
Installation Instructions
- Use a tape measure, spirit level, marker pen, and electric drill according to the distance to locate.
- After drilling the hole knock the expansion bolt into the hole.
- Screw the hanger delivered to the corresponding position. (Pay attention to the direction upwards)
- Method 1: Plug-in Equipped with a US 2-prong plug. It can be used with wall sockets.
- Method 2: Wall Switch Control Cut off the plug, and connect the mirror’s wire to the wall switch’s wire. (L-L N-N).
- Clip the lamp to the wall via fixed parts. Turn on and work, installation finished.
FEATURES
Lighting&Control
- The integrated light source and system do not support customers to replace. Please do not change by yourself.
- The lights(and defogger)are controlled by a touch sensor on the mirror surface to turn on/off and adjust brightness and color temperatures. Keeping the mirror lights on then you can also control it on & off by a wall switch.
Key 1: DIM (Light Switch)
- Short-touch: Turn on/off the lights.
- Long-touch: Adjust the brightness stepless.
- Double-touch: Adjust 3 lighting modes (Only front light, only backlit, and double lightingstrips) recycle after turning on the lighting strips. Only internal and external luminous models are supported
Key 2: Color Temperature
- Click to change color temperature(3000K/4000K/6000K), long press could change the color temperature from 3000K-6000K.
Key 3: Defog Switch
- Press to control the defog function ON/OFF. [Defog time need: Winter(5-10 Mins) Summer(2-3Mins)]
Memory Function
Remember your last settings for the LED mirror, making it easier to use.
About Power Auto Off
To help you save energy the LED mirror has designed a particular function. The
power (light/defogger) will auto-off after an hour using (start timing for the
last operation).
Electrical Safety Instructions
Installation must be a professional who has a qualified/registered
electrician. If you have no experience with installation please do not try by
yourself. We will not be responsible for it.
Warning
Read this instruction carefully before and during the installation process to
ensure that your product is installed safely and correctly.
Cut off the power supply before installation and maintenance. According to
IEEE regulations, the installation of the bathroom must comply with the
appropriate area. This product is suitable for zone 2 and outside zone, but
not suitable for zone or zone 1. Although this product has iP44 protection, it
is only suitable for U50.
Cleaning Note
- Turn off the mirror power when cleaning.
- Do not use abrasive or solvents when cleaning the mirror. We suggest using a soft damp cloth to wipe off water spillages.
- Do not submerge the mirror in water.
NEED HELP?
- If you have any questions (product damage, missing accessories, installation method, etc), please contact us in time through the Amazon order or below methods. Answer within 24 hours.
- Email: Ledmirrorlight@outlook.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>