LightpathLED Diesel Mini + Mini Combo User Manual
- June 17, 2024
- LightpathLED
Table of Contents
LightpathLED Diesel Mini + Mini Combo
Revision History
Date| Description of changes
January 2024| New Layout
What’s Inside
- Panel
- Goggles
- Charging Plug
Technical Specifications
Power | 425W |
---|---|
Input Voltage | AC-110-240V ** |
LED Quantity | 16 pcs. |
Wavelength | 630nm ** |
Time Control | Yes |
Beam Angle | 30 Degree |
Product Size | **16* |
Working Temperature | -20˚C to 45˚C |
Lifespan | 50,000 Hours |
Irradiance | 0” ** |
Device Buttons & Directions
Directions
Charge the Mini for 6 hours before first use. The working time is 2 hours before needing recharging for 6 hours.
- Charging Port: Insert the DC5V/2A charger into the charging port.
- Battery indicator Symbol: The battery indicator symbol shows life.
- Main Switch of the Device: Turn the switch to the “ON” position and turn the switch to “OFF” when no longer using it to save energy. Tip: Don’t need to toggle this switch when charging.
- Display of function setting: The display button shows the time remaining.
- Timer: Press this to set the time: 5 minutes, 10 minutes, 15 minutes, 20 minutes, 25 minutes, and 30 minutes.
- Pulsing: Press this button to set the pulsing: “0Hz and 294hz”. 0hz is non-pulsing.
- On/Off: Press this to turn on, and press this again to turn off.
- Mode Setting: Press this button “0001, 0002, 0003” for the working modes. The mode 0001 means Red only, 0002 means NIR only, and 0003 means Red +NIR together.
- Battery indicator button: Press it once, and the battery indicator will display the current battery level (the red light is on, which means 25% power, and it goes up in sequence; the first green light indicates 50% power, the second green light indicates 75% power, the third green light indicates 100% charged).
General Dosing Instructions
Important Information Regarding Dosing
For skin issues:
We want between 6J to roughly 15J per area. So optimal treatment times with
the lights are 5 minutes per area (if the light is 3 inches away).
For deeper issues (muscle, bone, brain, organs, glands, fat, etc.):
we want around 10-60J per area, so optimal treatment times and treatment
distances are 10 minutes per area if the light is 3 inches away. 15 minutes
per area if 6 inches away.
Red NIR Mode 2 | Red / Blue / NIR Mode 3 |
---|---|
Distance From Skin | Distance From Skin |
Surface | 1 in. |
Penetration | Penetration |
Skin | Deeper |
Deeper
90 sec| 10 min| 120 sec| 18 min| 240 sec| N/A| 80 sec| 10 min| 100 sec| 18
min| 200 sec| N/A
FAQ’s
- Q1. Can I wear clothes when using the panel?
- It’s important to have clean, bare skin wherever the light is being used. Clothes, makeup, lotions, oils, etc. Will block and deflect some or most of the light.
- Q2. How long do I use it per day?
- It is important to always start slow, 2 minutes per area, and then you can add 1 minute until you reach the desired time. It’s best to skip a day in between sessions initially. As long as you are feeling well, you can use it every day.
- Q3. Should I wear goggles?
- Do not look directly into the light. Light therapy has shown positive results for eye health, however, if the light is too bright or bothersome, please wear goggles.
- Q4. Does the panel work while charging?
- Yes
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>