LightpathLED Vertical And Horizontal Stand Installation Guide

LightpathLED Vertical And Horizontal Stand

Product Specifications

• Product Name: Vertical & Horizontal Stand
• Compatibility: Fits most standard devices
• Material: Durable plastic
• Color: Black
• Dimensions: 5″ x 3″ x 2″

Accessories lists

INSTALLATION INSTRUCTION

Step 1: Install The Universal Wheel

• a) Press The Anti-Rotation Lock Of The Universal Wheel.
• b) Install The 4 Wheels On The Base.
• c) Turn Over The Base To Normal.

Step 2: Install The Lower Round Tubes

• a) Insert The Lower Round Tube Into The Base Hole.
• b) Then Lock The M8*25mm Inner Hexagonal Screws On The Bottom And Middle Of The Round Tube.
• Step 3: Install The Plastic Cover
  • a) Buckle The Special- Plastic Cover On The Middle O The Round Tube.

Step 4: Install The Plastic Cover

• a) First press the positioning pin on the telescopic tube into the lower round tube, adjust the height.

• b) And then lock it with M8* 25mm hexagon socket screws

Step 5: Install The Rectangular Baffle

4.6A Horizontal Stand Installation:

Step 6A: Install The Long Straight Brackets

a) Use M8*40mm Hexagon Socket Screws To Lock The Two Long Straight Brackets On The Back Of The 2 Red Panels.

Step 7A: Install The L-Shaped Bars

Step 8A: Install Vertical Hooks

• a) Padlock The Vertical Hook To The L-Bracket.
• Step 9A: Install The Panel Lights On The Stand4.6B Vertical Stand Installation:
• Step 6B: Install The Vertical Hook
• Step 7B: I nstall The Long Straight Brackets
• Step 8B: Install The Short Straight Brackets

Step 9B Install Panel Lights

• a). Put Two Groups Of Panel Lights Up And Down.
• b). And Lock Them on the Vertical Rod With M8*40mm Hexagon Screws.
• c). Tighten The Safety Screw On The Long Straight Brackets.

Step 10:

• Press The “Leader” Key For The Leader Panel(1520W), and Press The “Follower” Key For The Other Panel(1140W).
• Insert The Daisy Chain Cable: First Insert One End Of the Daisy Chain Cable Into The Ac Output Port Of The Master(1520W), And The Other End Into The Ac Input Port Of The Follower(1140W)
• Insert The Rj14 Cable to the Leader/Follower Port To Connect The 2 Panels.

Note: Any Panel Can Be The Leader Panel.

FAQ

Frequently Asked Questions

• Q: Can this stand hold tablets and smartphones?
  • A: Yes, this stand is designed to hold most standard tablets and smartphones.
• Q: Is the stand adjustable for different viewing angles?
  • A: Yes, you can adjust the angle of the stand for both vertical and horizontal positions.
• Q: What should I do if my device does not fit securely on thestand?
  • A: Ensure that your device is placed correctly on the stand and that it is within the size compatibility range. If stability remains an issue, contact customer support for assistance.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>