LeCavist LE125BB Back Bar Cooler Instruction Manual

LeCavist LE125BB Back Bar Cooler

Product Information

• Specifications:
  • Models: LE125BB, LE205BB, LE335BB, LE205SBB, LE335SBB
  • Intended Use: Commercial
  • Power Supply: Standard mains outlet
  • Controller: 2 digits display (-88), 3 characteristics (refrigeration, defrost, alarm)

Product Usage Instructions

• Safety Instructions:
  • Keep this instruction manual for future reference.
  • Always unpack and set up the appliance with two people due to its weight.
  • Do not use a damaged appliance; contact your supplier if damage is detected.
  • Follow installation instructions strictly.
  • Use the appliance indoors only.
  • Do not attempt to repair the appliance yourself; seek qualified customer service for maintenance.
  • Regularly inspect the power plug and cord for damage.
  • Route the power cord securely to prevent tripping hazards.
  • Use original accessories only.
  • Avoid inserting objects into the appliance’s casing or opening the casing.
  • Ensure ventilation openings are not obstructed.
  • If any parts are damaged, unplug the appliance and seek professional repairs.
• Controller Operation Instructions:
  • Display Description:
  • The display features 2 digits and 3 characteristics (refrigeration, defrost, alarm).
  • Refrigeration mode: Light on indicates refrigeration, blinking light means output delay.
  • Alarm: The controller will alarm when reaching set conditions.
  • Defrost: Light on indicates defrosting.
  • Key Description:
  • There are 3 buttons to operate the controller.
  • In normal mode, pressing a button for a specific duration accesses different menus and parameters.
  • Button usage includes setting parameters, saving changes, and exiting setups.

FAQs

• Q: Can I use this appliance for residential purposes?
  • A: No, this appliance is intended for commercial use only.
• Q: What should I do if the power cord is damaged?
  • A: If the power cord is damaged, stop using the appliance immediately and contact qualified personnel for repairs or replacement.
• Q: How do I access the parameter settings on the controller?
  • A: In normal mode, press the designated button for more than 6 seconds to access parameter settings. Follow on-screen instructions to modify parameters.

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions for use carefully before using the device. Observe all safety instructions, to avoid damage through improper use.

1. Keep this instruction manual for future use. Should this appliance be passed on to a third party, this instruction manual must be handed over.
2. This appliance is heavy. To prevent injury or damage to it, unpack and set up with two people.
3. Never use a damaged appliance! Disconnect the appliance from the mains outlet and contact your supplier, if it is damaged.
4. Connect and install this appliance in strict compliance with the relevant instructions in this manual.
5. Only use the appliance for its intended use. The appliance is intended for commercial use.
6. No responsibility is accepted for damage resulting from improper use or non-compliance with the instructions.
7. Only use the appliance indoors.
8. The danger of electric shock! Never try to repair the appliance yourself. Refer to a qualified customer service outlet for maintenance and repairs.
9. Regularly check the power plug and power cord for damage. A damaged power cord has to be replaced by the manufacturer, his customer service or a similar qualified person to avoid danger of injury.
10. Before inserting the power plug into the mains outlet, check that the power supply voltage and current rating correspond with the power supply details shown on the appliance rating label.
11. Avoid damage to the power cord. Do not squeeze, bend or scour on sharp edges. Keep away from hot surfaces and naked flames.
12. Please connect the earthing wire to the terminal of equipotentiality using a qualified technician.
13. For your safety, only connect the appliance with a properly earthed mains outlet. Unplug the appliance immediately if you get an electric shock when touching the appliance.
14. Do not pull on the power cord. Only pull on the plug. Do not wrap the power cord around the appliance.
15. This appliance must be earthed!
16. Securely route the power cord so that no unintentional pulling or tripping over it is possible.
17. Connect the power plug with an easily reachable mains outlet so that in case of an emergency the appliance can be unplugged immediately.
18. Only use original accessories.
19. The appliance is powered when connected to the power supply.
20. Warning! Do not insert any objects into the casing of the appliance.
21. Do not open the casing.
22. Do not obstruct or cover the ventilation openings. Keep the appliance well-ventilated at all times.
23. Should the cover of the light or ventilator grill fall off or break, unplug the appliance immediately and contact qualified personnel for repairs.
24. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
25. Children should be supervised to ensure that they do not play with the appliance.
26. Do not keep the key of the appliance lock near or within reach of children.
27. Do not touch the appliance with wet hands. Do not operate the appliance with wet hands or standing on a wet floor.
28. Warning! During cleaning or operation do not immerse the appliance in water or other liquids. Do not clean the appliance with a garden hose.
29. Should water flow into the appliance, immediately unplug the appliance and let it be inspected by qualified personnel before using it again.
30. Do not place combustible, explosive or volatile articles, corrosive acids or alkalis in the appliance. Store high-proof spirits only in an upright position and close them properly. Containers with flammable gases and liquids can leak at low temperatures and catch fire from electrical appliances’ sparking. The danger of explosion!
31. Warning! This product is for food storage with containers. Do not place food without a container.
32. Danger of fire! In the event of refrigerant leakage, unplug the appliance, remove any ignition sources nearby, ventilate the room and contact your supplier. Avoid contact with the eyes as the refrigerant may cause serious eye injury. You can find details on the refrigerant on the rating label.
33. Do not accelerate the defrosting process by using mechanical devices, heating sources (candles or heaters) or other means. The emerging steam can cause short circuits and too high temperatures can damage the synthetic covering of the appliance.
34. Caution: Fire hazard
35. Warning – keep clear of obstructions to all ventilation openings in the appliance enclosure or the structure for built-in.
36. Warning – do not use mechanical devices or other means to accelerate to defrosting process, other than those recommended by the manufacturer.
37. Warning – do not damage the refrigerant circuit.
38. Warning – do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

Controller Operation Instruction

1. Display description
2. Digits display(-88),3 characteristics(refrigeration,defrost,alarm)
3. Refrigeration. Light on means the unit is in refrigeration mode, and light blinking(1Hz) means refrigerating output delay.
4. Alarm. The controller will alarm when reaching the set condition.
5. Defrost. Light on means the unit is defrosting.

  *  **Note：** when setting parameters the alarm sign flashes at a speed of 2Hz.

Key description

• There is 3 buttons to manipulate the controller.
• button
• In normal mode, press for more than 6s, and you will access the menu of parameter 1, press and at the same time you can access the menu of parameter 2.
• In parameter setting mode, press will alternately display parameter value and parameter name, if you press more than 3s, the parameters will be saved and exit setup. button is also used to save changes when you are setting the temperature.
• Press and at the same time for more than 10 will lock/unlock the parameter, you will see “ off ”/ “ on ” in the display window（. You can only check the parameter but cannot change it when it’s locked）.

Button

• Press for 10s will startup or shutdown the controller,it displays when the controller is off, the compressor doesn’t work in this case.
• Press and for 10s will restore defaults. You will see “CF” in the display window.
• In parameter setting mode, you can press to select parameter.
• In temperature setting mode, it is for increasing the set temperature.

Button

• Press for 5s you will access defrost mode. In parameter setting mode, you can press to select parameter.
• In temperature setting mode, it is for decreasing the set temperature.

Function and Parameters

Set temperature
Display or set current temperature:

• Press for 1s to display the current temperature, and press again to return to normal mode.
• Press or increase or decrease the value, until reaches the expected number,
• Press to confirm the setting.

Access parameter 1

1. Press for more than 6s, it will show parameter code” E1”.
2. Press and to see the parameter name.
3. Press to see corresponding parameter values.
4. Press or to select parameters.
5. Press to save the modification.
6. If you want to modify other parameters, please repeat step2~5.
7. Press more than 3s, parameters will be saved and you will exit setup.

Note：

1. If you don’t press any buttons in 10s, the parameters (the value temporarily stored in RAM) you set before will not be saved. The parameters will be the previous settings.
2. All value temporarily stored in RAM will lost if the controller blackouts before you save the parameter. The parameters will be the previous ones when you restart.

Access parameter 2

1. Press and for more than 6s, it will show parameter code” F1”.
2. Press and to see the parameter name.
3. Press to see corresponding parameter values.
4. Press or to select parameters.
5. Press to save the modification.
6. If you want to modify other parameters, please repeat step2~5.
7. Press more than 3s, parameters will be saved and you will exit setup.

Note：

1. If you don’t press any buttons in 10s, the parameters (the value temporarily stored in RAM) you set before will not be saved. The parameters will be the previous settings.
2. All value temporarily stored in RAM will lost if the controller blackouts before you save the parameter.The parameters will be the previous ones when you restart.

Set the default parameters

Set the default parameters：

1. Press and hold it until the power is on.
2. Loosen the buttons when you see “CF”.

Sensor

E5 sensor offset
This parameter is used to correct the sensor for measuring temperature. The figure represents the sensor temperature plus (positive) or minus (negative) offset.

Temperature control

• St Set temperature Used to set the working temperature’s rest point
• E1 Minimum temperature The minimum value allowed to be set(St)
• E2 Maximum temperature The maximum value allowed to be set(St)
• E3 Range of temperature In cooling mode, when temperature <=St, the compressor stops working; when temperature>=St+rd, the compressor starts working.

Compressor protection

Compressor protection parameter：

E4 Minimum shutdown time
It needs at least C1(Unit: Min)to make the compressor from shutdown to restart.

Defrost

F4

| Temperature display when defrosting| ****

2

| ****

0

| ****

1

| ****

–

| ****

1

F6

| Temperature locked when defrosting| ****

2

| ****

1

| ****

30

| ****

–

| ****

10

• F1 Defrosting time
  • The time needed for defrosting
• F2 Defrosting cycle
  • Intervals between two defrosting
  • When F2=0, the defrost function will be shut down.
• F4 Temperature display when defrosting
  • It displays the current temperature while defrosting
  • When F4=0, it shows the temperature that the sensor measures.
  • When F4=1, it shows the temperature when defrost begins.
  • How to return to normal display condition: after defrosting, delay time after the F6, returning to normal temperature display.

Abnormal work mode

• When the probe short circuit or high-temperature overrun(higher than 99℃), you will see “HH”
• When the probe open circuit or low temperature overrun(lower than -40℃),you will see “LL”
• In this mode, the controller comes into timing work mode, compressor works for 45 minutes, rest for 15 minutes, and that cycle repeats.

BEFORE FIRST USE

• Remove all packaging ( Disposal of packaging).
• Check for completeness and transport damage. In case of damages or incomplete delivery please contact your dealer ( Guarantee).
• Clean the appliance ( Cleaning).
• Place the appliance on a horizontal and stable surface with a maximum incline of 5%.
• Do not expose parts that heat up. Try to position the appliance close to a wall, but leave enough space for ventilation to ensure good circulation and efficiency of the appliance.
• Keep the appliance away from any substance, which can cause ignition.
• Do not position the appliance in direct sunlight or near any heat sources.
• Protect the appliance from moisture, extreme heat or cold.
• Climate class of the appliance:

Please see the climate class and matched temperature range for reference:

• Never use an extension cord– the risk of overheating! If the power cord (4) does not reach the nearest mains outlet, either rearrange your store layout or ask qualified personnel to fit a new outlet. The appliance is fitted with castors (5) so that you can easily move it from one place to another. Two of the four castors have brakes.
• Warning! Do not move the appliance across uneven floors or steps. If power is cut off, wait for at least 5 minutes before plugging the appliance in again to avoid damaging the compressor.
• Important! Allow the appliance to stand upright for 8 hours before connecting to a mains outlet for the first time, to allow the refrigerant to settle. The maximum load for a shelf (8) is 25kg.

CLEANING

• Unplug your appliance and remove any products to a suitable backup showcase before cleaning.
• Take out all removable parts before cleaning.
• Clean the inner compartment (9), equipment parts and casing (3) with dry cloth. Do not allow the control panel (7), power cord with plug (4), Ventilation opening (2), lamp (11) or other electrical components to become wet.
• Never use corrosive detergents, wire brushes, or abrasive scourers to clean your appliance.
• Never use metal or sharp implements to remove debris.
• Dry all surfaces thoroughly.
• Use a dry cloth to clean the gaskets and seals. Check them for debris to ensure the door (10) always closes properly.
• Do not remove or damage the rating label as it contains important data.

Replacing the lamp

• Please do not replace the lamp (11) yourself. Contact qualified personnel for this purpose.
• Note: the specification of the replacement lamp should be the same as the original one.

DISPOSAL INTRODUCTIONS

Disposal of old appliances

• Disable discarded appliances by removing the plug and cutting through the power cord.
• Break any locks to avoid children and other persons becoming trapped. If possible, remove any doors and discard them separately.
• Warning – hazardous chemicals! Do not allow children to play with the old appliance.
• Do not damage the refrigerant circuit during the storage and transportation of old appliances! Make sure that the evaporator pipes, refrigerant circuit and surface coverings are not damaged.
• Avoid contact with the eyes as the refrigerant may cause serious eye injury.
• Do not store old appliances near heat and ignition sources. In the event of leakage, the refrigerant of this appliance is highly inflammable.
• Please note: the refrigeration system contains gases and refrigerants which require specialist waste disposal.

Disposal of packaging

• All packaging materials should be disposed of in an environmentally friendly way.
• The cardboard may be used as scrap paper. The protective foil and the foam cushions are CFC–free.
• Do not allow children to play with the packaging and destroy plastic bags safely.
• You can break or cut the cardboard into smaller pieces and give it to a waste paper disposal service.

Environmental protection

• Discarded electric appliances are recyclable and should not be discarded in domestic waste! Please actively support us in conserving resources and protecting the environment by returning this appliance to the collection centres (if available).

GUARANTEE

A statutory guarantee applies for this product. Claims must be submitted immediately after their determination. The right to guarantee claims expires upon any intervention of the purchaser or third parties. Damages caused by wrong treatment or operation, false placement or storage, improper connection or installation, as well as force or other external influences are not covered by this guarantee. We recommend careful reading of the operating instructions as they contain important information. The purchaser must prove the right to guarantee claims by presentation of the purchase receipt.

Note:

1. In case this product does not function correctly, please first check if there are other reasons, e.g. interruption of the power supply, or incorrect handling are the cause.
2. Please note that the following documents need to be submitted together with your faulty product:
   • Purchase receipt
   • Model description/Type/Brand
   • Describe the fault and problem as detailed as possible
3. In the case of a claim for guarantee or defects, please contact the seller personally.
4. This product contains a light source of energy efficiency class G. The Light source in this product is replaceable only by a professional.
   • Osass Australia Pty Ltd.
   • PO Box 141, Waverley 2024

Models

• BACK BAR COOLER
  • LE125BB
  • LE205BB
  • LE335BB
  • LE205SBB
  • LE335SBB

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>