roomdividers ca E2 Height Adjustable Desk Instruction Manual
- June 17, 2024
- roomdividers ca
Table of Contents
roomdividers ca E2 Height Adjustable Desk
Product Information
Specifications:
- Max. Weight Capacity: [Insert Max. Weight Capacity]
- Max. Speed: [Insert Max. Speed]
- Input Voltage: [Insert Input Voltage]
- Min. Height: [Insert Min. Height]
- Max. Height: [Insert Max. Height]
- Desktop Size: [Insert Desktop Size]
- Duty Cycle: [Insert Duty Cycle]
- Working Temperature: [Insert Working Temperature]
Parts Included:
- Desk Foot x 2
- Lifting Column (Left) x 1
- Lifting Column with Motor (Right) x 1
- Support Plate x 2
- Transmission Rod x 1
- Crossbeam x 1
- Baffle x 2
- Adapter x 1
Assembly Notes:
- Installation must be done by at least two people.
- Installation needs to be done on a carpet to prevent scratches.
- Installation will require a Phillips screwdriver or pistol drill.
Frequently Asked Questions (FAQ)
- Q: What tools are required for installation?
A: Installation will require a Phillips screwdriver or pistol drill.
Specifications
| Max. Weight Capacity | 154 Ibs (70 kg) |
|---|---|
| Max. Speed | 1″/s |
| Input Voltage | 100 – 240 V |
| Min. Height | 28″ (710 mm) |
| Max. Height | 47.6″ (1210 mm) |
| Desktop Size | 39.3″ – 63″(1000 -1600 mm) in width and |
19.7″ – 31.5″(500 -800 mm) in depth
Duty Cycle| 10% (Working 2 minutes then stop 18 minutes)
Working Temperature| 32° – 104° F
Assembly Notes
Product List
Accessory Package
The figures shown are for reference only. Please contact customer service if
any accessories or tools are missing.
Parts Included
Assembly Steps
Keypad Instruction
Fast Charging Features:
- Safety: Built-in over-temperature protection, over-current protection, short-circuit protection, and output interface current-limiting protection to ensure safe operation of the product;
- Compatibility: The product is compatible with mainstream smartphones and notebooks on the market and can quickly charge the device.
Output Parameters:
- a. Single USB Type-C port output: MAX 45W, 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 2.25A;
- b. Single USB Type-A port output: MAX 27W, 5V 2A, 9V 2A, 12V 1.5A, 15V 1.8A, 20V 0.9A, Compatible with Xiaomi CHARGE TURBO, Huawei FCP/SCP, Samsung AFC protocol.
- c. When both Type-C and Type-A are connected to the device, the output voltage drops to 5V to power the device, MAX 22.5W.
- d. Charging function will be paused while adjusting desk height and resume charging once the desk movement stops.
Reset Function:
- a. When the display screen shows ” “, the desk enters the reset state. At this time, press and hold the “-” key until the desk reaches its lowest height and rebounds a little to stop. The display now shows the lowest height, release the “-” key, reset process is finished.
- b. At the lowest position, press and hold the “-” key for 3 seconds; the display will show ” “. Repeat step a to complete the reset.
Anti-collision function:
- The desk will stop automatically when an obstruction is detected while the desk height adjustment is in motion.
Adjust the Sensitivity of Anti-collision:
- Keep pressing “+” and “-” buttons at the same time for 3 seconds to switch the sensitivity. One operation to switch to one gear, a total of 4 gears (• • • ••• • • •• • • • );
- “• • • “, low sensitivity;
- “• • • “, middle sensitivity;
- “• • • “, high sensitivity;
- “• • • “, switch off the anti-collision function.
（Before switching off the function please make sure there aren’t any objects under the desk to prevent potential damage.）
Troubleshooting:
- a. When the error code E01 or E02 occurs, please retry after more than 18 mins.
- b. When other error codes occur and the “-” button doesn’t work, please confirm the cable is not damaged and is well connected and then cut off the power for more than 10 seconds. Reconnect to the power and LED display shows “rst”, then start the reset process by pressing and holding the “-” button.
- c. If our troubleshooting tips don’t yield any success, please contact customer service.
Resolving Common Issues
The following tips will help you identify and correct common issues. If you encounter an issue not listed in the table below, or if you follow the instructions below and the issue is still not resolved, please contact your supplier. All such anomalies or errors can only be investigated and corrected by the manufacturer or specially trained personnel.
| Problem | Solution |
|---|---|
| No action when you press “up” or ” down” button | Check all cables connected |
well;
Slow Lifting Speed|
Check if the load weighs more than 154 Ibs;
The work surface height keeps sliding down
The desk experiences a lot of automatic resets
The desk goes down but can’t go up, or it goes up but can’t go down|
Reset;
The desk does not extend fully to the maximum and minimum heights
The desk cannot be lifted
Overwork (Duty cycle: max 2min on/18min off)| Suspend it for 18 minutes before
connecting power again;
Recycling and Disposal
This product cannot be disposed of as household waste. To prevent damage to the environment, this product should be recycled. Please use the relevant recycling systems available to you or contact the distributor or manufacturer for recycling assistance.
Attention
- Power supply: AC100V-240V, 50/60Hz
- Service Environment: 32-104°F
- Unplug the power plug before cleaning, and wipe the dust on the surface with a slightly wet dishcloth when cleaning. Be careful to not let the drops into the internal parts, or into the loose connector.
- The electric box contains electronic components, metals, plastics, wires, etc. Ensure you dispose of it by each country’s environmental legislation. Do not dispose of them with general household waste.
- Check carefully to ensure correct and complete assembly before using.
- Be familiar with all functions and program settings of the product before first use.
- Children are forbidden to play on the product because of unforeseen hazards. Therefore, the manufacturers will not be liable for any accident caused by this improper action.
- The slight noise caused by the V-ribbed belt or brake system within the structure will not have any effect on the use of the equipment.
- Corrosive or abrasive materials SHOULD NOT be used to clean the equipment. Must ensure that the cleaner used will not pollute the environment.
- This appliance can be used by children aged 8 years and above. It can also be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge. However, this is on the condition that they’re given proper supervision or instructions concerning the use of this appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
- Cleaning and user maintenance SHALL NOT be handled by children without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
- Please make sure there are no hazardous sources in your operating environment. e.g., do not litter the tools around. Always be careful to dispose of the packaging materials to avoid any possible danger, e.g. plastic bags are a choking hazard to children.
- Keep the original package of the equipment if necessary in case of future use in transportation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>