REASNOW C1 USB Cable 1.5m Switching User Manual
- June 17, 2024
- REASNOW
Table of Contents
REASNOW C1 USB Cable 1.5m Switching
Introduction to ReaSnow C1
Major Features of ReaSnow C1
ReaSnow C1 is both a keyboard and mouse simulator and a wonderful companion of ReaSnowS1, Connector A is a HID device, Connector B is a keyboard and mouse combo device, so control data can be sent from connector A to connector B to simulate a keyboard and mouse combo.
Technical Specifications
| Cable length | 1.5 meter |
|---|---|
| USB version | USB 2.0 compliant |
| USB Polling Rate | 1000hz |
| Platforms | PS5/PS4/PS3/XSX/XB1/XB360/MAC/PC |
| Color | Black |
| Temperature | -10~50℃ (14~122℉) |
| Humidity | Below 90% |
Usages
Here are some usages of ReaSnow C1: mostly it can be used in a way like this on PC:
- **S1 to PC
** In this way, ReaSnow S1 can send keyboard and mouse data to a PC, so users can switch between a controller and a set of keyboard and mouse immediately to play games or to performance other daily tasks.
-
S1 to game consoles
And ReaSnow C1 can also be used to control game consoles too, as shown in this picture: But an extra and compatible USB hub will be required. -
PC to S1( to be released )
in this way, ReaSnow C1 can be used as a input module of ReaSnow S1, a PC can send key board and mouse data to ReaSnow S1,and have S1 do some tasks automatically.
When used on game console, an extra and compatible USB hub will be required.
- PC to PC( to be released )
a PC can send keyboard and mouse data to another PC to do some tasks automatically.