ANTEN NTC-EC2107014 32×24 inch LED Lighted Bathroom Mirror User Manual
- June 17, 2024
- ANTEN
Table of Contents
LED BATHROOM MIRROR
User Manual
NTC-EC2107014 32×24 inch LED Lighted Bathroom Mirror
Accessory List
Instructions
for use of accessories
Installation cardboard: according to the size of the product custom
installation hole map, paste in the location where you want to install the
mirror light wall, and then lock the screw hole location, easy to install
Touch Control Operation
| 1. Short-touch to turn ON and OFF.
2. Long-touch to adjust brightness.
3. Double-touch to tum off the indicator light (After the mirror lights turn
off).
---|---
| Short-touch to adjust color temperature.
| Short-touch to turn on the anti-fog function.
Specification
Size| Watts| Lumens (front-lighted)| Lumens (backlit)|
Color Temperature| CRI| Defogging Time (Auto Shutdown)| IP
Rate| Voltage| Working Temperature
---|---|---|---|---|---|---|---|---|---
2028| 25W| 1150LM| 2500LM| 2700-6000K| RA>90| 1H| 54| 120V| -20-50°C
3224| 30W| 1400LM| 3000LM| 2700-6000K| RA>90| 1H| 54| 120V| -20-50°C
361124| 30W| 1400LM| 3000LM| 2700-6000K| RA>90| 1H| 54| 120V| -20-50°C
3628| 30W| 1400LM| 3000LM| 2700-6000K| RA>90| 1H| 54| 120V| -20-50°C
4024| 30W| 1400LM| 3000LM| 2700-6000K| RA>90| 1H| 54| 120V| -20-50°C
4032| 35W| 1650LM| 3500LM| 2700-6000K| RA>90| 1H| 54| 120V| -20-50°C
6028| 50W| 2300LM| 5000LM| 2700-6000K| RA>90| 1H| 54| 120V| -20-50°C
6032| 50W| 2300LM| 5000LM| 2700-6000K| RA>90| 1H| 54| 120V| -20-50°C
7224| 50W| 2300LM| 5000LM| 2700-6000K| RA>90| 1H| 54| 120V| -20-50°C
Vertical installation
- Place the punch posi tioning card where you want to install the mirror keep it horizontal and drill holes.
- Drill pilot holes on the marked spots.
- Screw the fixed part. (direction is upwards)
- Wall Switch Control Cut off the plug and connect the mirror’s wire to the wall switch’s wire. (L-L N-N).
- Clip the lamp to wall via fixed parts. Turn on and works, installation finished.
- The product can also be used with wall sockets.
Horizontal installation
- Place the punch positioning card where you want to install the mirror keep it horizontal and drill holes.
- Drill pilot holes on the marked spots.
- Screw the fixed part. (direction is upwards)
- Wall Switch Control Cut off the plug and connect the mirror’s wire to the wall switch’s wire. (L-L N-N).
- Clip the lamp to wall via fixed parts. Turn on and works, installation finished.
- The product can also be used with wall sockets.
Safety instructions
Electrical Safety Instructions
Installation must be performed by a qualified/registered electrician.
Please do not try to install it yourself, the brand owner is not responsible
for the problems caused by unprofessional installation.
Warming
Please read this instruction carefully and re-read it during the
installation process to ensure that your product is installed safely and
correctly.
Cut off the power supply during installation and maintenance. It is recom-
mended to remove the fuse or turn off the circuit breaker for necessary
circuits before installation.
Fitting in bathrooms is subject to the appropriate zone in accordance with IEE
Regulation. This product is suitable for zone 2 and outside zones. it is not
suitable for installation in zone O or zone 1. It is also not suitable for
installation in saunas area,steam rooms or shower cubicles. This product is
only suitable for permanent installation. DO NOT connect to a trailing plug
and socket outlet. Although the waterproofing grade of this product is
IP54,but it’s only suitable for indoor use. DO NOT attach the product to
surfaces that are damp or electrically conductive.
Cleaning
Turn off when cleaning.
Can use clean water to remove stains.
DO NOT use abrasives or solvents to clean the mirror light, please use a soft
damp cloth to wipe off any spilled water as much as possible.
Please DO NOT immerse the mirror light in water.
FQA
Q: Can I install the mirror light horizontally?
A: Yes, there are two fix parts for horizontally installed.
Q: Will it be complicated to install?
A: The installation is friendly for you. The package con- tains instructions and installation tools, and you don't need to measure the size of the mirror. Just drill pilot holes on the marked spots with the punching holes position card.
Q: Does it have a timer function?
A: Yes, the defogging function will automatically shut off after one hour.
Q: Can the indicator light be turned off?
A: Yes, kindly turn off the mirror light and double-touch the to turn off the indicator light.
Q: Is there any certification for the mirror light?
A: The FCC certification.
Q: Does it have a memory function?
A: Yes. Keeping up two seconds after the end of the last operation, the light has a memory function.
Q: Can the mirror light be switched on and off by a wall switch?
A: Yes. You could use wall switch or touch switch to control the mirror light
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>