FEND Super Lights Helmet Owner’s Manual

FEND Super Lights Helmet

Product Information

Specifications:

• Models: FEND Super + Lights Helmet & FEND Super Helmet
• Compliance: US CPSC Safety Standard for bicycle helmets for persons age 5 and older, CE EN1078:2012+A1:2012 Europe Safety Standard, UKCA regulation 2016/425 for personal protective equipment

Product Usage Instructions

Unfolding and Folding the Helmet:
To unfold the helmet, rotate both sides outwards until you hear a click. Push on both sides to ensure it’s fully unfolded. To fold the helmet, lift the lock tab and rotate one side inwards, repeating on the opposite side.

Fit Guide:
Ensure the helmet fits correctly and is worn properly for maximum protection. Place the helmet onto the head with the rear fit adjuster in the back. It should be straight in the front to protect your forehead. Fasten the buckle securely under the chin and adjust the strap for a customized fit. Ensure straps do not cover the ears.

Rear Fit Adjuster:
Rotate the rear dial fit adjuster clockwise to tighten and counterclockwise to loosen. The fit should be adjusted for comfort and should not be uncomfortably tight.

Fit Check:
After making all adjustments, stand in front of a mirror and grab the helmet with both hands. Twist left and right; your forehead skin should move along with the helmet. If it can be rolled off completely in either direction, readjust the fit. If you cannot adjust it properly, do not use the helmet.

FAQ:

• Q: Can children use this helmet?
  A: This helmet is not recommended for children in any activity where there is a risk of strangulation or hanging if trapped with the helmet.

• Q: How often should I replace the helmet?
  A: FEND generally recommends replacing the helmet every three years or after it has received an impact, visible damage, or no longer fits properly.

Models: FEND Super + Lights Helmet & FEND Super Helmet
Complies with US CPSC Safety Standard for bicycle helmets for persons age 5 and older, and CE EN1078:2012+A1:2012 Europe Safety Standard for Helmets for pedal cyclists and users of skateboards and roller skates. This helmet is in conformity with UKCA regulation 2016/425 for personal protective equipment.

Please read carefully before use. Please contact us at help@fend.io if you have any questions. We are here to help!

WHAT’S INCLUDED

WHAT’S INCLUDED (Model: FEND Super + Lights Helmet)

• FEND Super Helmet
• FEND Super Front Light
• FEND Super Taillight
• Dual USB-C to USB-A Charging Cable

WHAT’S INCLUDED (Model: FEND Super Helmet)

• FEND Super Helmet

HELMET MANUAL
This helmet is designed for pedal cycles, skateboards, and roller skates and is not intended for motor vehicles or other sports.

WARNING:
This helmet should not be used by children in any activity, including climbing, where there is a risk of strangulation or hanging if the child gets trapped with the helmet. The helmet must be fitted and attached properly to the user’s head by the manufacturer’s fit instructions. It will only be protective when it is the correct size and properly adjusted. It is recommended to try different sizes to ensure the best fit.

No helmet can prevent all injuries. Even low-speed accidents can cause serious injuries or death. Please ride with care and caution and comply with all traffic regulations. Once a helmet has received an impact, it may no longer be adequate to protect the head against further impacts and should be discarded and replaced even if damage is not visible. FEND generally recommends replacing a helmet every three years.

HOW TO USE HELMET

• Unfolding the Helmet: Rotate both sides of the helmet outwards until you hear a “click” (see Figure A). To check if it’s fully unfolded, push on both sides. If the sides rotate inward, it’s not locked. Continue rotating until you hear the “click”.
• Folding the Helmet: Lift the lock tab ( ) and rotate one side of the helmet inwards (see Figure B). Repeat on the opposite side.

FIT GUIDE

Make sure the helmet fits correctly and is worn properly to ensure it will provide the maximum protection.

• Fit: Once the helmet is fully open, place it onto the head with the rear fit adjuster in the back. Make sure the helmet is straight in the front to protect your forehead (see Figure C). Never wear the helmet tilted forward or backward. Not all adjustments must be made when the helmet is perfectly horizontal across the forehead. Failure to do so may result in an improper fit with the risk of the helmet not being secured properly and may come off in an accident.
• Buckle: Fasten the buckle securely under the chin (see Figure D). Pull the strap tight for a customized fit. Make sure straps do not cover the ears (see Figure E). Check all adjustments each time before use.
• Rear Fit Adjuster: Rotate the rear dial fit adjuster clockwise to tighten and counterclockwise to loosen (see Figure F). Note the fit should be adjusted for your comfort and should not be uncomfortably tight.
• Fit Check: Once all adjustments are made, it is very important to check the fit. Stand in front of a mirror and grab the helmet with both hands. Twist left and right. Your forehead skin should move along with the helmet. If it can be rolled off the head completely in either direction, it does not fit properly and needs readjustment.
  WARNING: If you cannot adjust the helmet to fit properly, it must not be used. Please consult with your dealer or contact FEND for further assistance.

HELMET CARE

• WARNING: Helmets can be damaged by certain cleaning solvents, including ammonia or bleach. The damage may not be visible to the user.
• Cleaning: Clean the helmet with a soft cloth using only warm water and mild soap. Note, the inner foam lining may be removed and washed separately. Do not dismantle or modify any part of the helmet, which will result in seriously jeopardizing its protective function.
• Storage: Store the helmet in a cool, dry place. Do not store in direct heat or sunlight. Excessive heat can damage the helmet.

LIGHTS MANUAL
The FEND Superlights are designed to enhance your visibility and safety while cycling, especially in low-light conditions or situations where visibility is reduced. Using both the front light and taillight is highly recommended and legally required in many states, as it significantly improves your visibility to other road users, particularly motorists. Before riding, ensure that the lights are sufficiently charged for optimal performance.

WARNING:
Do not attach the FEND Super Light(s) to any other helmet. Using the FEND Super Light(s) with other helmets may compromise your safety, including on impact.

HOW TO USE LIGHTS

1. Charging the Lights: Before using, charge the lights for approximately 1.5 hours. The lights are fully charged when the indicator lights switch off.
2. Turning On/Off the Lights: To turn the Light On/Off, press and hold the power button located on the back of the light for 2 seconds (see Figure G), until the light turns On/Off.
3. Turning On/Off the Lights When Installed in the Helmet: To turn the Light On/Off when installed in the helmet, press the U-shaped indicator bump located on the front side of the light for 2 seconds (see Figure H), until the light turns On/Off.
4. Switching Modes: The light features three modes: Steady, Pulse, and Flash. To switch between these modes, quickly press the power button for 1 second each time.

HOW TO INSTALL/REMOVE LIGHTS FROM HELMET

1. Choose the Correct Light: The Front Light (White Light) should always be placed on the FRONT of the helmet, and the Taillight (Red Light) should always be placed on the BACK of the helmet (See Figure I).
2. Install Lights Onto Helmet: Locate the designated slots for the lights on the FEND Super helmet and push the lights into the slots until an audible click is heard, indicating they are securely locked in place.
3. Remove Lights From Helmet: From the inside of the helmet, push outward on the back surface of the light until it snaps out of place (see Figure J).

HOW TO CHARGE THE LIGHTS

1. Locate Charging Port: Peel back the protective rubber layer on the back of each light to uncover the USB-C port (see Figure G on page 6).
2. Charging Time: It takes approximately 1.5 hours to fully charge the lights with a completely drained battery.
3. Charging Indicator: The LED light will blink while charging and will switch off once charging is complete.

The charger’s output voltage must not exceed 5V. Use only Class II electrical, CE/UL approved charger with double insulation against hazardous voltages.

LIGHT STORAGE AND CLEANING

Store the lights in a cool, dry place. To clean, wipe with a damp cloth. Do not submerge or use harsh cleaning chemicals.

LIGHT SPECIFICATIONS

• Three light modes: Steady, Pulse, and Flash
• Memory stored for the last mode used
• Power saving flash mode triggered at 5% battery and lasts 20 minutes
• IPX6 Waterproof rating
• Temperature range: 0-40 degrees Celsius (32-104 degrees Fahrenheit)
• Battery: 400mAh Lithium
• Charging Voltage: DC 3.7V

LIGHT BATTERY WARNING

The FEND Super Lights are powered by a rechargeable Lithium-ion battery, commonly used in many electronic devices. If mishandled, these batteries can pose a risk of fire or explosion.

• Avoid submerging the rechargeable battery in water. If the battery or interior of the light gets wet, let all parts dry before attempting to use it again.
• Do not expose the battery to high temperatures.
• Do not burn, puncture, dismantle, or damage the battery, as this can cause explosions or release of toxic materials.
• If the rechargeable battery becomes damaged or stops functioning, do not disassemble or damage it. Instead, take it to a battery recycling or disposal facility under local regulations.
• In case the rechargeable battery leaks any liquid, avoid any contact and consult a doctor if contact occurs.
• Adhere to all relevant regulations and airline instructions when shipping or transporting the battery on an aircraft.

LIMITED WARRANTY

HELMET 1-YEAR LIMITED WARRANTY
FEND offers the original purchaser a 1-year limited warranty from the date of the original purchase to be free from defects in materials or workmanship. This warranty is non-transferable and only applies to the original purchaser of the product. This warranty does not apply to defects or physical damage resulting from abuse, neglect, improper maintenance, improper fit, alterations, impact, accident, normal wear and tear, heat or contact with chemicals, or use not intended by FEND. If your FEND product is found to be defective in materials or workmanship within one year from the original date of purchase, contact your dealer or FEND, who will, at their discretion, either repair or replace the product. FEND assumes no responsibility for any costs, losses, or damages incurred due to the loss or use of its products. Furthermore, FEND specifically disclaims any claims for incidental or consequential damages. Your use of FEND products is solely at your own risk and discretion. You are solely responsible for any loss, liability, or damages resulting from the use of our products, including personal injury, loss of life, and property damage. This warranty does not affect your statutory rights and is in place of all other agreements, guarantees, and warranties, and no representative or person is authorized to assume liability on behalf of FEND in connection with the sale or use of this product. All warranties are hereby limited to the duration of this limited warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Please note that unauthorized reselling of FEND products is prohibited.

• EU Type Examination Conducted By: ITS Testing Services (UK) Ltd., Centre Court, Meridian Business Park, Leicester LE19 1WD. UKCA AB0362.
• Notified Body: Kiwa Nederland B.V, with its office located at Wilmersdorf, 50, 7327 AC Apeldoorn, The Netherlands. Notified Body No. 0063
• Manufactured By FEND Corp: 188 Grand Street, Second Floor #1164, New York, New York 10013, USA – Made in China – Factory: 4404164ACS – www.fend.io – help@fend.io.
• The EU and UK declaration of conformity is available at: www.fend.io/pages/eu-doc.

www.fend.io.

References

• FEND Foldable Bike Helmets | Free Shipping & Free Returns
• FEND Foldable Bike Helmets | Free Shipping & Free Returns
• UK Declaration of Conformity – FEND

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>