Kensington MY430 Rechargeable Mouse User Guide

Kensington MY430 Rechargeable Mouse

Specifications:

• Model: Kensington MY430 Rechargeable Mouse
• Connectivity: 2.4GHz wireless and Bluetooth
• Resolution: 1000, 1600, 2400 DPI
• Compatibility: USB-A and USB-C devices

Product Usage Instructions

Button Functionality:
Starting at the top of the mouse and going clockwise:

• Scroll Wheel
• Power Indicator
• Right Click
• DPI Switch
• Backward
• Forward
• Left Click

Power On:
To use the mouse, slide the On/Off Switch on the bottom to the on position.

Pairing:
Using 2.4GHz Receiver:

1. Remove the receiver from the bottom of the mouse.
2. Insert the receiver into a USB-A port on your device.
3. Press the Channel Selection/Bluetooth Pairing Button until the
   indicator light is green.

Using Bluetooth:

1. Press the Channel Selection/Bluetooth Pairing Button to BT1 or BT2.
2. Press and hold the Channel Selection/Bluetooth Pairing Button for 3 seconds to enter Bluetooth pairing mode.
3. Follow device instructions to establish the Bluetooth connection.

Software Customization:
Download software from the provided link to enable customization. Follow onscreen instructions for installation.

Battery Charging:
Low Battery: A flashing red light indicates low battery. To charge:

1. Plug USB-C end into mouse and USB-A end into device.
2. A solid red light indicates charging. Light goes off when fully charged.

DPI Setting:
Use DPI Switch to adjust sensitivity between 1000, 1600, and 2400 DPI.

Battery Disposal:
Disposing of Battery:

• Remove bottom padded feet to access casing screws.
• Use a screwdriver to remove casing screws.
• Slide top casing down to remove it and dispose of battery properly.

Frequently Asked Questions (FAQ):

1. Q: Can I replace the battery in the Kensington MY430 Rechargeable Mouse?
   A: No, the device is not equipped with a replaceable battery. Attempting to remove or replace the battery will void the warranty and may damage the device.

2. Q: How do I check the battery status of the mouse?
   A: The Power Indicator light will flash red when the battery is low (less than 5% remaining).

3. Q: How do I adjust the mouse sensitivity?
   A: You can adjust the sensitivity by using the DPI Switch on the mouse to toggle between different DPI settings (1000, 1600, 2400).

Website: kensington.com/register

kensington.com/software/kensingtonworks/

Flashing Red: Low Battery

Solid Red: Charging

LED Off: Fully Charged

IMPORTANT: Computer User Health Information
Use of a keyboard, mouse, or trackball may be linked to serious injuries or discomfort. Recent medical research of occupational Injuries has linked normal, seemingly harmless activities as a potential cause of Repetitive Stress
Injuries (RSI). Many factors may be linked to the occurrence of RSI, including a person’s own medical and physical condition, overall health, and how a person positions and uses his or her body during work and other activities (including use of a keyboard, mouse, or trackball). Some studies suggest that the amount of time a person uses a keyboard, mouse, or trackball may also be a factor. Consult a qualified health professional for any questions or concerns you may have about these risk factors. When using a keyboard, mouse, or trackball, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. However, if you experience symptoms such as persistent or recurring discomfort, pain, throbbing. aching. tingling. numbness, burning sensation, or stiffness, even if such symptoms occur while you are not working at your computers. DO NOT IGNORE THESE WARNING SIGNS. PROMPRY SEE A QUALIFIED HEALTH PROFESSIONAL These symptoms can be signs of sometimes permanently disabling RSI disorders of the nerves, muscles, tendons, or other parts of the body.

RF TECHNICAL SPECIFICATION

• Operating Frequency Range:  2400″2483.5 MHz
• Maximum RF Output Power:  S 20dBm(EIRP)

SAFETY AND USAGE GUIDELINES

1. In the absence of proper operation and if customer-initiated troubleshooting is unsuccessful, switch off device and contact Kensington technical support: www.kensington.com
2. Do not disassemble product or expose it to liquid, humidity, moisture, or temperatures outside the specified operating rangesof O” C (32″ F)to 40″ C (104″ F).
3.  If your product is exposed to out-of-range temperatures, switch it off and allow temperature to return to the normal operating range.

The power delivered by the charger must be between min 1.5 Watts required by the radio equipment, and max 5 Watts in order to achieve the maximum charging speed.

Lithium-ion Polymer Battery (NMC)
This device is not equipped with a replaceable battery. Attempts to remove or replace the battery will void the warranty and may damage the device. When disposing or recycling this device, the battery should be disposed of in a manner compliant with local battery disposal regulations.

• ****www.kensington.com/support

Kensington® is a registered trademark of ACCO Brands. All other registered and unregistered trademarks are the property of their respective owners. Windows is a registered trademark of Microsoft Corporation in the U.S. and/or other countries.
© 2023 Kensington Computer Products Group, a division of ACCO Brands.
Patents: https://www.accobrands.com/patents/

References

• Kensington Account
• Computer Products & Accessories: Locks & Docks | Kensington
• Support | Kensington
• KensingtonWorks Customization Software

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>