SOLODALLAS TSR Schaffer Replica Compander Boost User Manual

SOLODALLAS TSR Schaffer Replica Compander Boost

Our original pedal version of The Schaffer Replica “Gold Tag” Tower, predecessor to the EX Tower. This companding boost is housed in a rugged enclosure that perfectly complements the vintage audio mojo inside .

CONSTRUCTION

1. 100% Analog Circuitry
2. High-quality PCB with gold plated contacts
3. Heavy Duty Footswitch
4. Commercial Grade Pots
5. Neutrik Jacks

The Schaffer Replica “Classic”

• The Schaffer Replica “Classic” features much of the same 100% analog signal path as our EX Tower that has quite literally rocked the guitar industry.
• It perfectly captures our signature “Schaffer Sound” voicing and offers three interactive circuits capable of generating a plethora of tones for every guitar configuration and genre of music.
• This 9/12/15 vDC design offers slightly stronger midrange than the 9VDC Storm, which some SoloDallas users have come to prefer. This rugged two knob unit is over-engineered to withstand the rigors of heavy gigging.

FEATURES

• INPUT knob controls our signature gain circuit that bumps the crucial low-mid frequencies responsible for giving live instruments punch and making them stand out in the mix (think Angus Young guitar tone).
• OUTPUT knob controls a powerful pre-amp capable of delivering a whopping 30db of clean boost. This analog boost is perfect for making lead parts stand out, adding fullness to the signal going into the front end of a clean amplifier or pushing it into oblivion!
• COMPANDER is based on a key feature in the original SVDS unit. Technically two effects, Ken Schatter s signature compander circuit features his version of the gold standard “soft knee” compression used by major studio engineers worldwide. This discreet analog compressor levels the output of each individual frequency then feeds them into a studio grade expander which restores amplitude and removes unnatural compression artifacts. Companding also tames transients while accentuating harmonics to produce the sonic richness associated with “The Schaffer Sound”.

Enclosure Dimensions: 439″ D x 234″ Wx 106* H

1. 2.1MM DE JACK
   Power Requirements: 9, 12 or 15 vDC
   Center Positive Power Supply (not included)

2. AUDIO OUTPUT

3. INSTRUMENT INPUT

4. EFFECT-ON INDICATOR

5. FOOTSWITCH

MADE IN USA

Documents / Resources

| SOLODALLAS TSR Schaffer Replica Compander Boost [pdf] User Manual
TSR Schaffer Replica Compander Boost, TSR, Schaffer Replica Compander Boost, Replica Compander Boost, Compander Boost
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>