hama 00176617 WiFi Doorbell with Camera and Ringer Instructions

: June 4, 2024
: Hama

hama 00176617 WiFi Doorbell with Camera and Ringer

hama-00176617-WiFi -Doorbell-with-Camera-and-Ringer-
image

overview

hama-00176617-WiFi -Doorbell-with-Camera-and-Ringer-
fig1

Controls and displays

B: Door Chime

1| Loudspeaker
2| Status light
3| Reset
4| USB power interface

hama-00176617-WiFi -Doorbell-with-Camera-and-Ringer-
fig3

C: Doorbell

Important information – Quick-reference guide

This quick-reference guide contains the most important basic information, such as safety instructions and the steps necessary to operate the product.
The full text of the manual is available at the following internet address:
www.hama.com -> 00176617 ->
Downloads
Save the manual on your computer for reference and print it out if possible.

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note: This symbol is used to indicate additional information or important notes.

Package contents

1 WiFi doorbell
1 door chime
1 power supply unit
1 mounting kit (reset needle, screwdriver)
1 quick reference guide

Safety instructions

General

This product is intended for private, noncommercial use only.
Use the product only for the intended purpose.
Do not operate the product outside the power limits given in the specifications.
Do not open the device or continue to operate it if it becomes damaged.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not drop the product and do not expose it to any major shocks.
Do not modify the product in any way. Doing so voids the warranty.
Dispose of packaging material immediately in accordance with the locally applicable regulati

Rechargeable battery

Warning – rechargeable battery

Only use suitable charging devices or USB ports to charge the product.
Do not use defective chargers or USB ports and do not attempt to repair them.
Do not overcharge the product or allow the battery to completely discharge.• Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
When stored over a long period of time, batteries should be charged regularly (at least every three months).
Protect the product from dirt, moisture and overheating and use it in dry environments only.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Only use the article under moderate climatic conditions.
The battery is integrated and cannot be removed.
Do not incinerate the battery or the product.
Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

Power supply unit

Risk of electric shock
• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Warning

Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the socket strip’s maximum throughput rating.
If you will not be using the product for a prolonged period, disconnect it from mains power.
Protect the product from dirt, moisture and overheating and use it in dry rooms only.
The product is intended only for use inside buildings.
Do not use the product in a damp environment and avoid splashing water.
Do not bend or crush the cable.

Specific information about the product

Note – Waterproof properties

With IP65, the doorbell is sufficiently protected against water and can also be used in the rain. IP65 offers protection against water jets from any angle. Be aware that, on contact with water, all ports must be sealed.
Carefully seal the USB port after the charging process to ensure that the product is waterproof.
Do not mount the product above locations where persons might sit or stand.
Before mounting, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
Pay attention to the applicable data protection regulations before installing and using theproduct.
Respect the personal and property rights of others. Do not make recordings of other people withthe camera.
Observe the right to one’s own image and spoken word when recording.
If you are unsure about connecting the product to the mains supply, please contact a qualified electrician.

Technical

Technical data – doorbell

Power supply Rechargeable battery charging (USB)| ****

5 V 1 A

---|---
Power supply Mains operation| AC 12 V-24 V
Frequency band| 2.4 GHz
Maximum radio- frequency power transmitted| ****

100 mW

Frequency band	433.92 MHz
Maximum radio- frequency power transmitted	****

10 mW

Speci fi cations according to Regulation (EU) 2019/1782

Brand name, commercial register number, address| Hama, HRA12159,

Dresdner Str. 9,

86653 Monheim, Germany

Model identifier| GTA92-0501000EU
Input voltage| 100-240 V
Input AC frequency| 50/60 Hz
Output voltage / output current / output power| 5.0 V DC / 1.0 A

/ 5.0 W

Average efficiency during operation| 73.6%
Efficiency at low load (10%)| 63.9%
Power consumption at zero load| 0.09 W

Technical data – door chime

Power supply	5 V 1 A
Frequency band	433.92 MHz

Installation

Battery operation

Mount the bracket in a suitable place.
Connect the USB charging cable included to the charging port on the doorbell and a suitable mains socket. Fully charge the doorbell.
Place the doorbell in the bracket and secure it with the screw.

Mains operation (optional)

Feed the AC power supply cables (AC 12V-24V) through the rectangular opening in the bracket and mount it in a suitable place.
Connect the cables as shown (see wiring diagram A).
Place the doorbell in the bracket and secure it with the screw.

Start-up and operation

Here’s how easy it is

Download the app

Download the Hama Smart Home (Solution) APP from the Apple App Store or Google Play Store.
Open the Hama Smart Home (Solution) APP
The first time you use the app, you need to register and create a new account. If you already have an account, log in with your access details.
Follow the instructions in the app.

Note: A detailed description of the Hama Smart Home (Solution) App and its full scope of functions can be found in our App Guide at

www.hama.com Article Number Downloads

Door chime

Press the Reset button (3) to connect the door chime to the doorbell.
The LED (2) on the door chime starts to flash.
Then press the bell button (5) on the doorbell.
The door chime is now connected to the doorbell and the LED (2) lights up permanently.

Adjusting the volume or ring tone

Navigate in the APP to the “Ring settings” tab.
Set the desired volume and desired door chime.
Press the Reset button (3) on the door chime.
The LED (2) on the door chime starts to flash.
Press the bell button (5).
The settings are transferred.

Note: To ensure ringing of the mobile phone, this must not be set to silent / vibrate.

Note: Pairing restart
First remove the rubber protector on the back of the door chime. Now press the Reset button with a needle or another thin object until a signal sound is heard. As soon as the LED starts to flash red, you can start a further pairing attempt.

Care and maintenance

Note: Disconnect the product from the mains before cleaning and during prolonged periods of non-use.

Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
Ensure that no water is able to enter the product.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

RF exposure information

This device complies with the EU requirements
for limiting the exposure of the general public to electromagnetic fields by means of health protection. The device complies with RF specifications provided it is used 20 cm away from the body.

Declaration of conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00176617] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:
www.hama.com -> 00176617 -> Downloads.