GAGGENAU CU421100 Induction Surface Protector Instruction Manual
- June 17, 2024
- Gaggenau
Table of Contents
GAGGENAU CU421100 Induction Surface Protector Instruction Manual
CU421100
Optional accessories
Installation accessories
Use of cookware directly on the worktop in combination with 12 mm Dekton worktop Integrated 21 cm cooking zone with booster function
Cooking zone center light for operation and residual heat indication directly on the surface Can be combined perfectly with other integrated induction modules of the 400 series
Cooking zones
1 induction cooking zone ø 21 cm (2000 W, with booster 2300 W).
Handling
Control knobs with illuminated ring, cooking zone and output level markings.
Electronic power control in 12 output levels.
Cooking zone center light indication.
Features
Booster function.
Keep warm function.
Options menu.
Safety
Only operates with enhanced surface protector.
Operation indicator.
Pot detection.
2-stage residual heat indication directly on the surface and knob.
Safety shut-off.
Planning notes
The integrated induction module must be installed under Dekton worktop in 12
mm thickness.
The bearing capacity and stability must be supported using suitable
substructures. Take into account the appliance weight and additional loads.
A 10 mm hole needs to be planned in the center of the cooking zone. Markings
to indicate the cooking zone need to be planned.
No other cut-outs permitted in the same worktop piece.
The elaboration of the Dekton is done by local fabricators, for a list of
recommended fabricators please contact your local representative.
For Dekton fabricators: refer to specification sheet “Marking and drilling
protocol for
Gaggenau induction” by Cosentino.
Minimum distances:
Cooking zone center to lateral edge of worktop 350 mm.
Cooking zone center to front and rear edge of worktop 400 mm.
Cooking zone center to next cooking zone center 350 mm or 450 mm depending on
combination.
Minimum distances at the back wall of the furniture and openings, refer to
dimensional drawings.
Operates with magnetic (induction) iron pots and pans only. For an optimal heat distribution, the use of sandwich bottom cookware is recommended.
Appliance weight: approx. 10 kg.
Connection
Total connected load 2.3 KW.
Connecting cable 1.5 m without plug.
Connecting cable 1 m for control knob.
CU421100
CU421100
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>