ROVSUN G47000271 67 Inch Single Bowl Sink User Manual
- June 17, 2024
- ROVSUN
Table of Contents
ROVSUN G47000271 67 Inch Single Bowl Sink
Product Information
Specifications:
- Sink x1
- Leg x4
- Bottom Shelf x1
- Short Square Tube x2
- Long Square Tube x1
- Left Bracket x1
- Right Bracket x1
- Shelf x2
- Wall Mounting Bracket x2
- Big Perforated Board x1
- Small Perforated Board x1
- Hook x8
- 6x15mm Screw x27
- 6x60mm Screw x6
- 6x35mm Screw x8
- 6mm Allen key x1
- Gasket x6
- Drain x1
- Downpipe x1
Product Usage Instructions
Assembly Steps:
-
STEP 1: Install the legs
Use 6x15mm screws (x16) to install the 4 legs. -
STEP 2: Install the square tubes
Install the short square tubes using the provided gaskets and 6x60mm screws (x6). Note that there are two height options for the short square tubes. -
STEP 3: Install the bottom shelf
Secure the bottom shelf using the 6x15mm screws (x2). -
STEP 4: Install the side brackets
Attach the side brackets with the provided 6x15mm screws (x4). -
STEP 5: Install the middle and top shelves
Use the 6x15mm screws (x4) to install the middle and top shelves. -
STEP 6: Install the perforated boards and wall mounting brackets
Place the big and small perforated boards, then secure them with the wall mounting brackets using the specified screws. -
STEP 7: Install the drain and downpipe
Finally, install the drain and downpipe using the designated parts.
Frequently Asked Questions (FAQs)
-
Q: How long does it take to assemble the product?
A: The estimated assembly time is between 40-60 minutes. -
Q: Are there any specific tips for assembling the product?
A: Yes, there are two height options for the short square tubes. Ensure to choose the appropriate height during assembly. -
Q: How many hooks are included with the product?
A: The product comes with 8 hooks for hanging items.
BEFORE STARTING
Before Using Product
- Read each step carefully before starting. Each step must be performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur.
- Make sure all parts are included. Most board parts are labeled or stamped on the raw edge.
- Recommended # of people needed for assembly: 1 (however it is always better to have an extra hand). The estimated assembly time is 40-60mins.
- Work in a spacious area and near where the unit will be used, preferably on a carpet, or use a piece of cardboard packaging to protect your floor and product.
- For a smooth assembly process, we suggest you keep a lite tightness for all the screws during assembly. After the whole product is assembled, firmly tighten all the screws.
WARNING:
- Do not allow children to climb on unit
- Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall. Fixing devices for the wall are not included since different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home. For advice on suitable fixing systems, contact your local specialized dealer
- Avoid sharp objects or corrosive chemicals to prevent damage to the product
- During assembly, keep parts and packaging materials away from children and pets as there could be potential injury and choking hazards
Components
Take your time! You will like it!
ASSEMBLY STEPS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>