MICROCOM PBT-HSXRC-66 XR All-In-One Wireless Headset Installation Guide
- June 17, 2024
- MICROCOM
Table of Contents
MICROCOM PBT-HSXRC-66 XR All-In-One Wireless Headset Installation Guide
Model Number: PBT-HSXRC-66
We at Pliant® Technologies want to thank you for purchasing the MicroCom XR
All-In-One Wireless Headset 6+6 Drop-in Charger. The charger’s design allows
users to simultaneously charge up to six MicroCom HS900XR Wireless Headset and
up to six Pliant rechargeable lithium-polymer batteries.
Charger Overview
A. MicroCom XR Headset Bay
B. Pliant Li-Poly Battery Bay
C. Headset Charging Status
D. Battery Charging Status
E. Power Connection
What’s in the Box?
• PBT-HSXRC-66 – Drop-In Charger
• 00004239 – Power Supply
• PC-PWR-XX (Region Specific) – AC Power Cord
• D0000691 – Operating Guide
• D0000219 – Warranty Extension Registration Card
LED Legend
Red: Charging
Blue: Charge Complete
Safety Recommendations
WARNING – DANGER! Users should take special precautions to avoid the introduction of hazards when operating, installing, servicing, transporting, or storing this device and lithium-polymer batteries.
• Do not place unit in areas where it will be exposed to weather.
• Exercise extreme care when working with electricity, and always connect the
device into a ground-fault interrupting circuit when working outdoors or near
water.
• PBT-HSXRC-66 should only be used at an altitude not exceeding 2000 m.
• Do not allow the power cord to become crimped, twisted, or frayed.
• Refer all PBT-HSXRC-66 service to qualified Pliant Technologies service
personnel.
• When the PBT-HSXRC-66 is exposed to electromagnetic (EM) disturbances, the
device may show abnormal behavior.
Tempest® TMA-BAT-02 (white label) batteries are not compatible with the PBT- HSXRC-66 charger.
Charger Operation
Headset charge time from empty is approximately 4 hours for Single and 6 hours for Dual. Single battery charge time from empty is approximately 4 hours.
Warranty
Subject to the conditions of this Limited Warranty, CrewCom and MicroCom products are warranted to be free from defects in materials and workmanship for a period of two years from the date of sale to the end user, under the following conditions:
• First year of warranty included with purchase.
• Second year of warranty requires product registration on the Pliant web
site. (See details below.)
Product Registration
Registering your CrewCom product is fast and easy. By doing so, your product warranty will be documented and you will qualify for a free second year of warranty. You will also have the opportunity to receive product news and more.
If you do not have an account on the Pliant Technologies web site, you will need to create one in order to register your product. You may access or create your account at: https://plianttechnologies.com/product-registration/
Additional Resources
For questions not addressed in this guide, feel free to review the additional product information provided on our website: www.plianttechnologies.com.
Pliant Technologies, LLC
205 Technology Parkway
Auburn, Alabama 36830 USA
Phone +1.334.321.1160
Fax +1.334.321.1162
Toll-Free 1.844.475.4268 or 1.844.4PLIANT
www.plianttechnologies.com
Copyright © 2023 Pliant Technologies, LLC. All rights reserved. The Pliant®
and MicroCom® word marks and the Pliant “P” logo are registered trademarks of
Pliant Technologies, LLC. Any and all other trademark references within this
document are property of their respective owners.
D0000691_A
Read More About This Manual & Download PDF: