Di Du B5 Bluetooth Headphones with Clip-on Ears User Guide
- June 13, 2024
- Di Du
Table of Contents
Quick guidance
First use: Take out the headset, tum on the headset automatically, turn on the
phone to set Bluetooth, Find B5 and make a match. Secondary use: take out the
headset, the headset will tum on ‘automatically, when the Bluetooth of the
mobile phone is turned on,
The headset automatically pairs with the phone.
Headset connection method & Procedure
- The two earphones automatically pair
When the two earphones are removed from the charging bay at the same time, the two headphone indicators blink quickly, and the two earphones are automatically paired. When the two ears are successfully paired, the two headphone indicators blink siowly.
- Pair your ears to your phone
At this time, open the mobile phone Bluetooth search for a B5, the connection can be used.
Product information
Product name| Bluetooth headphones
with clip-on ears
| Horn size| 13mm
Product model| B5| impedance| 16Ω
BT version| V5.3| Endurance time| About 5H (70% volume)
Net weight| 30g| Standby time| About120H
Frequency
response range| 20Hz-20KHz| Rated input| DC5V
Power on & Power off
Earphone: Take it out of the charging bay and tum it on automatically, o long
press the mult-function button for 2 seconds.
Shutdown: Put the headset back to the charging bin, enter the charging state
can automatically shut down, or long press the multi-unction button for 5
seconds to shut down.
Answer the phone
When an incoming call comes in, click the multifunction button on either
headset.
- After some brands of mobile phones are paired with Bluetooth, the call will be answered by the phone handset by default, if you need to set up, please consult the phone information.
End call
Press the multifunction button on either headset during a call.
Reject a call
When an incoming call comes in, double-click the multifunction button on either headset.
Pause play
Pause: Click
Play: Click
Volume adjustment
Increase the volume: Double click the right ear
Reduce the volume: Double click on the left ear
Cut to a song
Next: Three strikes on the right ear Previous: Three blows to the left ear
Earphone charging
- This product has built-in non-removable rechargeable battery, which is charged by a special contact charging compartment.
- Special charging bin must be used for charging. (Note: The charging compartment must be provided by our company, charging in other ways will not charge, and even damage the headset battery)
- When the earphone battery is low, the Bluetooth earphone will have a “Di Du” tone every once in a while to remind the user to charge.
- When the headset is charging, the light will tum off after 30 seconds, and then it will be full for about an hour.
FCC ID:2AW3W-B5
FCC Statement
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device has evaluated to meet general RF exposure requirement. The device
can be used be in portable exposure without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>