one LIGHT 89012L DALI Dimmable Driver Instructions
- June 17, 2024
- one LIGHT
Table of Contents
one LIGHT 89012L DALI Dimmable Driver
Specifications
- Input Voltage & Frequency: 230V AC 50/60Hz
- Power Factor: 0.95
- Operating Temperature: Not specified
- Output Current: 100mA to 700mA
- Output Power: 0.6W to 4.2W
Product Usage Instructions
Adjusting Output:
To adjust the output, use the DIP switches provided on the product. Select
the desired output current based on your requirements by setting the DIP
switches accordingly. Refer to the provided chart for the corresponding output
power levels.
Installation:
- Ensure the product is switched off and disconnected from the power source.
- Properly install the product based on the fitting instructions provided.
- Connect the product to the electricity following the DALI wiring diagram and ensure correct polarity.
Warnings:
- Ensure proper installation before connecting to electricity.
- Maintenance and installation should be done by a professional electrician.
FAQ
-
How do I know which output current to set?
The appropriate output current setting depends on the requirements of your LED lights. Refer to the specifications and consult with a professional if needed. -
What should I do if I encounter issues with adjusting the output?
If you face difficulties in adjusting the output, refer back to the installation manual for detailed instructions or contact customer support for assistance.
DIMENSION
DALI WIRING DIAGRAM
SPECIFICATION
DIPS TO SET THE OPERATION CURRENT
Warning: Before use, make sure the correct output current or voltage is
set.
Warnings:
- Make sure that the product is installed properly before connecting to electricity.
- Maintenance and installation should only be carried out by a professional electrician.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>