FORIOUS FF0220 Towel Ring for Bathroom Stainless Steel User Manual

Table of Contents

FORIOUS-FF0220-Towel-Ring-for-Bathroom-Stainless-Steel-
product

Specifications

Model : FF0220
Product Type : Towel Ring
Dimensions:
- Overall Length : 6.88 inches
- Overall Width : 5.3 inches
- Base Diameter : 2.55 inches
- Depth : 1.96 inches

Installation Instructions

Place the Towel Ring on the wall where you want to install it and mark the outline of the product base using a pen.
Remove the mounting bracket paper from the marked circle base and mark two points on the wall according to the holes on the paper.
Using a 1/4 inch driller, drill holes on the wall at the marked points. The depth of the holes should be the same as the white anchors provided.
Insert the white anchors into the drilled holes using a hammer. Make sure the anchors are fully inserted into the holes.
Use an allen wrench to loosen the setting screw and remove the mounting bracket from the accessory.
Tighten the mounting bracket on the wall using a screwdriver to ensure stability.
Place the accessory onto the mounting bracket and tighten the setting screw located at the bottom.
Your sturdy towel ring is now ready to use.

FAQ

Q: What is the model number of the towel ring?
- A : The model number of the towel ring is FF0220.
Q: What are the dimensions of the towel ring?
- A : The towel ring has an overall length of 6.88 inches, an overall width of 5.3 inches, a base diameter of 2.55 inches, and a depth of 1.96 inches.
Q: How do I install the towel ring?
- A : To install the towel ring, follow these steps:

Place the towel ring on the wall and mark the outline of the product base.
Remove the mounting bracket paper and mark two points on the wall according to the holes on the paper.
Drill holes on the wall at the marked points using a 1/4 inch driller.
Insert the white anchors into the drilled holes using a hammer.
Loosen the setting screw and remove the mounting bracket from the accessory.
Tighten the mounting bracket on the wall using a screwdriver.
Place the accessory onto the mounting bracket and tighten the setting screw at the bottom.

FORIOUS-FF0220-Towel-Ring-for-Bathroom-Stainless-Steel-
fig1

You may need

FORIOUS-FF0220-Towel-Ring-for-Bathroom-Stainless-Steel-
fig4

Place the Towel Ring on the wall where you need to install it, and mark the outline of the product base with a pen.
Cover mounting bracket paper on marked circle base, mark 2 points according to paper holes to drill wall holes.
Use 1/4 inch driller to drill holes on the wall that you marked, the depth same as white anchor.
Use a hammer hit the white anchors into holes, and make sure who anchors into hole.
Use the Allen wrench loosen the setting screw and remove the mounting bracket from the accessory.
Use a screwdriver to tighten the mounting bracket on the wall stable.
Put the accessory onto the mounting bracket and tighten the setting screw in the bottom.
Get the sturdy towel ring.