Madenia JMD-260 Portable Rechargeable Nail Drill Machine with LCD Screen User Manual

Madenia JMD-260 Portable Rechargeable Nail Drill Machine with LCD Screen

Specifications:

• Model: JMD-260
• Power Input: DC 5V 2A
• Power Output: DC 3~12V, 24W
• Weight: 0.7kg
• Dimensions: L200 x W115 x H55(mm)

Product Usage Instructions

Power On and Light Up:
Press the ON/OFF button to power on the nail drill. The atmosphere lights will start to light up, indicating the machine is in working state.

Adjust Speed:
Rotate the speed control knob upwards to increase the speed from 0 to 35, reaching maximum speed. To decrease the speed, rotate the knob downwards from 35 to 0, reaching the minimum speed.

Pause Mode:
To pause the machine, press the ON/OFF button once to enter the pause phase.

Forward/Reverse:
Press the Forward/Reverse button to switch between forward and reverse rotation of the nail drill.

Shutdown:
To shut down the machine, press and hold the ON/OFF button for 2 seconds until the machine enters the shutdown state.

Low Battery Notification:
When the machine has only one battery left, it indicates that it needs to be charged.

Charging:
Use the Type-C charging hole with an input of 5V 2A to charge the nail drill when needed.

FAQ

Q: How can I tell if the nail drill needs to be charged?
A: When the machine has only one battery left, it indicates that it needs to be charged.

Q: How do I adjust the speed of the nail drill?
A: Rotate the speed control knob upwards to increase speed and downwards to decrease speed.

NAIL DRILL SYSTEM

1. F/R display
2. Speed display
3. Atmosphere light
4. Speed knob
5. Forward/Reverse
6. Battery display
7. Madenia logo
8. Portable buckle
9. ON/OFF
10. Type-c charging hole
11. Handpiece
12. Handpiece hole

SPECIFICATION

1. Input Voltage: DC:5V= 2A
2. Output Voltage: DC:3~12V
3. Power: 24W
4. Weight: 0.7kg
5. Dimension: L200W115H55(mm)

PRECAUTION

1. Do NOT disassemble the handpiece
2. Do NOT drop the handpiece
3. Do not work in a humid environment.
4. 0perating Environment Humidity:30-75%
5. 0perating Environment Temperature:+ 10°C~26°C
6. Turn off the power when changing the bits
7. Make sure the power switch is off before plugging in the power cord to avoid an unexpected injury due to a sudden start.

SET AND OPERATION

set drill bits

1. Turn left side clockwise until you hear it click into the place
2. Take out the original bit
3. Insert the 3/32 ” size bit Insert the 3/32 ” size bit
4. Tum the right side anti-clockwise to lock the bit tightly

Operation Steps:

1. Press“ ”button,the atmosphere lights starts to light up,and the machine begin to work state. control knob
2. Rotate the speed control knob “ ” upwards, adjusting the machine from 0-35 to maximum speed. opposite,rotate the speed control knob downward, adjusting the machine from 35-0 to the minimum speed
3. Press“   button again, the machine enter pause phase
4. Press“ button, represents switching between forward and reverse
5. Press the“ for 2 seconds, the machine enter into shutdown state
6. When the machine only has one battery left, means needs to be charged it .

WARRANTY

We offer 1 year manufacturer warranty. If you have any questions. please feel free to contact us at support@madenia.com

Skylimit Service GmbH Roedingsmarkt 20 20459 Hamburg

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>