Haoyijor V15 Wet and Dry Use Vacuum Cleaner with Mop Instruction Manual

Instruction Manual
Product Name: Wet and Dry
Use Vacuum Cleaner with Mop

V15 Wet and Dry Use Vacuum Cleaner with Mop

The product is subject to the actual packaging, the picture is for reference only

http://Haoyijor_service@outlook.com

After-sales email：
Haoyijor_service@outlook.com

1. This mop head is only used as a vacuum cleaner accessory. The suction power during use mainly depends on the Dyson host product. You can choose to adjust the Dyson host gear to improve the efficiency of accessories.
2. If you don’t want water to come out of the mop head when using this accessory: Remove the clean water tank.
3. Recommended effective cleaning process: first remove the water tank and use the mop head to dry mop the floor; then install the clean water tank and perform wet mopping.
4. It is recommended to replace the brush head if sewage continues to remain on the roller brush. There is a gift brush head adding in the packaging.

Customer Service

Email US: Haoyijor_service@outlook.com

Breakdown of main parts of floor washing machine

Machine disassembly and assembly instructions

1. Clear water tank installation and use instructions
2. Clear water tank disassembly instructions for use

Sewage tank disassembly instructions for use

Sewage tank installation and use instructions.

Rolling brush disassembly instructions for use

Rolling brush installation and use instructions.

Note during the use of the whole machine

1. When stationary, the scrubber is erect. Before using, tilt the host while making sure that the scrubber’s bottom is close to the ground and does not bend. The host shouldn’t be overbent.
2. After use, empty the sewage from the sewage tank before you elevate the floor brush to change positions. This will prevent sewage from spilling outside.
3. Irregularities in the usage of the product or if you are unsure how to proceed, please stop using right away, study the troubleshooting instructions, or speak with the vendor.
4. If the water level valve is inactive when the water level in the sewage tank reaches the MAX water level line, the sewage tank should be promptly drained.
5. After using the floor scrubber, avoid rinsing the brush’s surface with water directly, make sure the cleaning cloth is completely dry before using it, and avoid getting water within the machine’s electrical components. Please clean the sewage tank as soon as possible; if left uncleaned for an extended period of time, it will begin to smell.
6. When the sewage tank is full, scrub it by floating it on the “FUII” water level valve. At this point the air entrance is blocked, reminding you that the sewage tank has to be cleaned. Please use small tools to immediately clean the wall of the sewage tank if it is discovered to have obstinate filth.
7. If the water spray hole of the floor brush head does not spray water during use, please use a brush tool to clean the dirty parts of the water spray part before use.
8. Automatic protection mechanism – During use, if the angle between the floor brush and the main unit is close to 90° or upright, the floor brush protection switch will be triggered, and the roller brush motor will switch to the disconnected state and stop working.

Simple Troubleshooting

Please first try the methods listed in the table below. If it doesn’t fix the problem, please get in touch with after-sales care. For your safety, do not attempt to fix the device yourself if it is defective, damaged, or the accessories are defective.

the angle between the floor brush and the main unit is close to 90° or upright, the floor brush Protection switch will be triggered, and the roller brush motor will switch to the disconnected state and stop working.| Do not tilt close to 90 or stand upright when in use.
Product out of power or low battery.| Recharge and use.
Rolling brush entangled by hair and other objects.| Cleaning roller brush.
Product suction power is weakened or not able to suck the ground water clean| The sewage tank has reached its maximum capacity.|  Use after pouring off the sewage.
Rolling brush, rolling brush cover, sewage tank installation is not in place.| Cleaning roller brush.
Rolling brush entangled by hair and other objects.| Cleaning roller brush.
Floor brush suction port or pipe is blocked.| Clearing blocked obstacles.
Sewage tank water level valve stuck.| Open the sewage tank to clean the trash around the water level vaive so that the water level valve moves up and down flexibly.
Host dust cup full of dust no suction.| Clean up dust cup trash.
Advance protection with high-grade water level valve.| Please use medium to low grade.
Washing brush head does not produce water| No water in the clear water tank.| Clear water tank filling.
Clear water tank is not installed.| Reinstallation of fresh water tank.
A small amount of sewage is sucked inside the main machine when the scrubber is working| Sewage tank installation is not in place.| Reinstallation of sewage tank.
The sewage tank has reached the specified capacity water level valve water full does not move.| Open the sewage tank to clean the trash around the water level valve so that the water level valve move up and down flexibly.
Floor brush upper cover water tank position with water.| Clean up the sewage on he surface of the top cove of the floor brush.
Continued use of the sewage tank after it reaches its designated capacity.| Pour off the sewage before use.
Improper use of gears, prohibit the use of high-grade.| Please use medium and low gears.
Rolling brush blocking rotation does not work| The roller brush of the floor brush is entangled by foreign objects or by hair, etc.| Please clean roller brush.

Product Specification

Email US: Haoyijor_service@outlook.com
SCAN ME
We’ll respond in 24 hours.
As long as you contact us through this email,
we promise to refund you unconditionally
(no need to send your goods back).
 Haoyijor_service@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>