BOSCH PXX9..DC Induction Hob Instructions

BOSCH PXX9..DC Induction Hob

Safety
Observe the following safety instructions.

General information

• Read this instruction manual carefully.
• Keep the instructions, the appliance, and the product information safe for future reference or for the next owner.
• Do not connect the appliance if it has been damaged in transit.

Intended use
Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty.
The appliance can only be used safely if it is correctly installed according to the safety instructions.
The installer is responsible for ensuring that the appliance works perfectly at its installation location.
Only use this appliance:

• To prepare meals and drinks.
• Under supervision. Never leave the appliance unattended when cooking for short periods.
  • in private households and in enclosed spaces in a domestic environment.
  • up to an altitude of max. 4000 m above sea level.
• Do not use the appliance:
  • With an external timer or a separate remote control. This does not apply if the operation with appliances included in EN 50615 is switched off.

If you wear an active implantable medical device (e.g. a pacemaker or defibrillator), check with your doctor that it complies with Council Directive 90/385/EEC of 20th June 1990, EN 45502-2-1 and EN 45502-2-2 and that it has been chosen, implanted and programmed in accordance with VDE-AR-E 2750-10. If these conditions are satisfied, and if, in addition, non-metal cooking utensils and cookware with non-metal handles are used, it is safe to use this induction hob as intended.

Restriction on user group
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliances safely and have understood the resulting dangers. Do not let children play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised. Keep children under the age of 8 years away from the appliance and power cable.

Safe useWARNING ‒ Risk of fire!

• Leaving fat or oil cooking on an unattended hob can be dangerous and may lead to fires.
• Never leave hot oil or fat unattended.
• Never attempt to extinguish a fire using water; instead, switch off the appliance and then cover it with a lid or a fire blanket.
• The cooking surface becomes very hot.
• Never place flammable objects on the cooking surface or in its immediate vicinity.
• Never place objects on the cooking surface.
• The appliance will become hot.
• Do not keep combustible objects or aerosol cans in drawers directly underneath the hob.
• Hob covers can cause accidents, for example, due to overheating, catching fire or materials shattering.
• Do not use hob covers.
• After every use, switch off the hob using the main switch.
• Do not wait until the hob turns off automatically as there are no longer any pots and pans on it.
• Food may catch fire.
• The cooking process must be monitored. A short process must be monitored continuously.

WARNING ‒ Risk of burns!
The appliance and its parts that can be touched become hot during use, particularly hob surround, if fitted.

• Caution should be exercised here to avoid touching heating elements.
• Young children under 8 years of age must be kept away from the appliance.
• Hob protective grilles may cause accidents.
• Never use hob-protective grilles.
• The appliance becomes hot during operation.
• Allow the appliance to cool down before cleaning.
• Metal objects on the hob quickly become very hot.
• Never place metal objects (such as knives, forks, spoons, and lids) on the hob.

WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.
• If the appliance or the power cord is damaged, this is dangerous.
• Never operate a damaged appliance.
• If the surface is cracked, you must switch off the appliance to prevent a possible electrical shock. To do this, switch off the appliance via the fuse in the fuse box rather than at the main switch.
• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
• If the appliance or the power cable is damaged, immediately switch off the fuse in the fuse box.
• Call customer services. → Page 17
• An ingress of moisture can cause an electric shock.
• Do not use steam- or high-pressure cleaners to clean the appliance.
• The insulation on cables of electrical appliances may melt if it touches hot parts of theappliance.
• Never bring electrical appliance cables intocontact with hot parts of the appliance.
• If metallic objects come into contact with the fan that is located on the underside of the hob, this may cause an electric shock.
• Do not store long, pointed metallic objects in the drawers below the hob.

WARNING ‒ Risk of injury!
Saucepans may suddenly jump due to liquid between the saucepan base and the hotplate.

• Always keep hotplates and saucepan bases dry.
• Never use icy-cold cookware that has been in the freezer.
• When cooking in a bain marie, the hob andcooking container could shatter due to overheating.
• The cooking container in the Bain Marie must not directly touch the bottom of the water-filled pot.
• Only use heat-resistant cookware.
• An appliance with a cracked or broken surface can cause cuts.
• Do not use the appliance if it has a cracked or broken surface.

WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it andsuffocate.

• Keep packaging material away from children.
• Do not let children play with packaging material.
• Children may breathe in or swallow small parts, causing them to suffocate.
• Keep small parts away from children.
• Do not let children play with small parts.

Avoiding material damage
This is where you can find the most common causes of damage and tips on how to avoid them.

Remove immediately with a glass scraper.
Stains, blisters, or fractures in the glass| Defective cookware, cookware with melted enamel, or cookware with copper or aluminum base.| Use suitable cookware that is in good condition.
Stains, discoloration| Unsuitable cleaning methods.| Only use cleaning agents that are suitable for glass ceramic, and only clean the hob when it is cold.
Blisters or fractures in the glass| Knocks or falling cookware, cooking ac- accessories, or other hard or pointed objects.| When cooking, do not hit the glass or let objects fall onto the hob.
Scratches, discolor- action| Rough cookware bases or moving the cookware on the hob.| Check the cookware. Lift the cookware when moving it.
Scratches| Salt, sugar, or sand.| Do not use the hob as a work surface or storage space.
Damage to the appliance| Cooking with frozen cookware.| Never use frozen cookware.
Damage to the cookware or the appliance| Cooking without contents.| Never place or heat empty cookware in a hot cooking zone.
Glass damage| Melted material on the hot cooking zone or hot pot lid on the glass.| Do not place greaseproof paper or aluminum foil nor plastic containers or pot lids on the hob.
Overheating| Hot cookware on the control panel or the frame.| Never place hot cookware in these areas.

ATTENTION

• A fan is located on the underside of this hob.
• If a drawer is located on the underside of the hob, do not store any small or pointed objects, paper or towels in it. These objects may be sucked in and damage the fan or impair the cooling.
• There must be a clearance of at least 2 cm between the contents of the drawer and the fan entry point.

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.

• Sort the individual components by type and dispose of them separately.

Saving energy
If you follow these instructions, your appliance will use less energy.
Select the cooking zone to match the size of your pan. Centre the cookware on the hob.
Use cookware whose base diameter is the same as the hotplate.
Tip: Cookware manufacturers often give the upper diameter of the saucepan. It is often larger than the base diameter.

• Unsuitable cookware or incompletely covered cooking zones consume a lot of energy.
• Cover saucepans with suitable lids.
• Cooking without a lid consumes considerably more energy.
• Lift lids as infrequently as possible.
• When you lift the lid, a lot of energy escapes. Use a glass lid.
• You can see into the pan through a glass lid without having to lift it.
• Use pots and pans with flat bases.
• Uneven bases increase energy consumption.
• Use cookware that is suitable for the quantity of food.
• Large items of cookware containing little food need more energy to heat up.
• Cook with only a little water.
• The more water that is contained in the cookware, the more energy is required to heat it up.
• Turn down to a lower power level early on.
• If you use an ongoing power level that is too high, you will waste energy.
• Product Information according (EU) 66/2014 can be found on the attached appliance pass and online on the product page for your appliance.

Suitable cookware
Cookware that is suitable for induction cooking must have a ferromagnetic base, i.e. it must be attracted by a magnet. The base must also match the size of the cooking zone. If cookware is not detected on a cooking zone, place this on the cooking zone with the next smallest diameter.

Size and characteristics of the cookware
To be able to correctly detect the cookware, you must take the size and the material of the cookware into consideration. All cookware bases must be perfectly flat and smooth. Use a Cookware test to check whether the cookware is suitable. Refer to → “Cookware test”, Page 15 for more details.

up quickly, and ensures that it can be detected easily.
| Ferromagnetic cookware made of enameled steel cast iron, or special induction cookware made of stainless steel.| This cookware distributes the heat evenly, heats up quickly, and ensures that it can be detected.
Suitable| The base is not fully ferromagnetic.| If the ferromagnetic area is smaller than the base of the cookware, only the ferromagnetic area heats up. As a result, the heat is not distributed evenly.

| Cookware bases that contain aluminum.| These cookware bases reduce the ferromagnetic area, which means that less power is emitted to the cookware. This cookware may not be sufficiently detected or may not be de-detected at all, and therefore does not heat sufficiently.
Not suitable| Cookware made from normal thin steel, glass, clay, copper, or aluminium.|

Familiarising yourself with your appliance

Cooking with induction
In comparison to conventional hobs, induction technology brings with it a series of changes and has many benefits such as time savings when cooking and frying, energy savings as well as greater ease of cleaning and care. It also offers improved heat control as the heat is generated directly in the cookware.

Control panel
Individual details, such as color and shape, may differ from the figure.

Notes

• Always keep the control panel clean and dry.
• Do not place any cookware near the displays or sensors. The electronics may overheat.

Touch buttons
When you switch on the hob, the symbols for the controls available at this time light up.

• Depending on the status of the hob, the displays for the cooking zones and the various activated and available functions also light up.

Distribution of the cooking zones
The specified power has been measured with the standard pots, which are described in IEC/EN 60335-2-6. The power may vary depending on the size of the cookware or cookware material.

Cooking zone
Before you start cooking, check whether the size of the cookware fits the cooking zone that you want to use for cooking:

Residual heat indicator
The hob has a residual heat indicator for each cooking zone. Do not touch the cooking zone if the residual heat indicator is lit.

Basic operation

Switching on the hob

• Touch ⁠.
• An audible signal sounds. The symbols for the cooking zones and the currently available functions light up . lights up next to the cooking zones. The hob is ready for use.

ReStart
If you switch the appliance on within four seconds of switching it off, the hob operates with the settings that were previously set.

Switching the hob off

• Touch until the displays go out.
• All cooking zones are switched off.

Note: If all of the cooking zones are switched off for longer than 20 seconds, the hob is automatically switched off.

Setting the power level in the cooking zones
The cooking zone has 17 power levels, which are displayed from to with intermediate values. Select the best power level for the food and the planned cooking process.

Cooking tips

• When heating up puree, cream soups or thick sauces, stir occasionally.
• To preheat, set the power level 8-9.
• When cooking with the lid on, reduce the power level as soon as you see steam escaping. The cooking result is not affected by the steam escaping.
• After cooking, place a lid on the cookware until you serve the dish.
• To cook with the pressure cooker, observe the manufacturer’s instructions.
• Do not cook food for too long, otherwise nutrients will be lost. The kitchen timer enables you to set the optimal cooking time.
• Ensure that the oil does not smoke.
• To brown the food, fry it in small portions, one after the other.

1. Touch the ⁠ symbol for the cooking zone you require.
   • The ⁠. display gets brighter.
2. Select the required power level in the settings area.
   • The power level has been set.

Note: If no cookware is placed on the cooking zone or the pot is not suitable, the selected power level flashes.
After a certain time, the cooking zone switches itself off.

QuickStart
If you place cookware on the hob before you switch it on, the cookware is detected when you switch on and the corresponding cooking zone is selected automatically. Select the power level in the next 20 seconds, or the hob switches itself off.

Changing the power level and switching off the cooking zone

1. Select the cooking zone.
2. Select the required power level in the settings range or set it to ⁠.

The cooking zone’s power level changes or the cooking zone switches itself off and the residual heat indicator appears.

• Some items of cookware may reach high temperatures while the food is cooking. You should therefore use oven gloves.
• You can find recommendations for energy-efficient cooking under → “Saving energy”, Page 5

Cooking recommendations
The table shows which power level ( ) is suitable for which food. The cooking time ( ) may vary depending on the type, weight, thickness, and quality of the food.

FlexInduction
The flexible cooking zone allows you to position cookware of any shape or size any way you like. It consists of four inductors that work independently of each other. When the flexible cooking zone is in use, only the area that is covered by cookware is activated.

Positioning the cookware
The flexible cooking zone can be configured in two ways, depending on which cookware is used. To guarantee good thermal detection and heat distribution, we recommend positioning the cookware in the centre, as shown in the figures.

As a connected cooking zone
Recommended for cooking with just one item of cookware.

• Position the cookware depending on the size:

• Recommended oblong cookware ⁠:

As two separate cooking zones
Recommended for cooking with two items of cookware.
You can use the front and rear zones independently of one another, and set a separate power level for each zone.

Centre cooking zone
The cooking zone consists of three inductors that work as a single cooking zone.

• Positioning the cookware

Caution
Do not place cookware in the middle between the right and left zones. The cooking zones are not activated correctly and you do not achieve a good cooking result.

Switching on FlexInduction

1. Place the cookware in the cooking zone.
2. Select the cooking zone.
   • The cooking zones split or connect automatically depending on the size and position of the cookware.
   • The FlexZone is connected and lights up.

Notes

• By touching it, you can manually change the settings for the cooking zone.
• You can change the default configuration of the flexible cooking zone. You can find out how to do this in the “Basic settings” section. → Page 14
• If you move or lift the cookware from an active connected cooking zone, an automatic search starts.
• Each item of cookware that is found within the cooking zone during this search is heated at the previously selected power level.

MoveMode
You can use this function to change the power level of an item of cookware by simply sliding it forward or backward in the flexible cooking zone. The zone is divided into three areas with different power levels.

Positioning and moving the cookware
Only use one item of cookware. The cooking area depends on the cookware used, as well as its size and positioning.
Each cooking area has a preset power level:

• Front area = power level 9
• Middle area = power level 5
• Rear area = power level 1.5

You can change the standard setting of the preset power levels. You can find out how to do this in the “Basic settings”

Activating MoveMode
Requirement: Only place one item of cookware on a flexible zone.

1. Select one of the two cooking zones in the flexible zone.
2. Press ⁠.
   • The power level in the area in which the cookware is located lights up in the cooking zone display next ⁠.
   • The function is switched on.

Note: You can change the power levels during cooking.

Deactivating MoveMode

• Touching
• The display beside switches off.
• The function has been deactivated.

Time-setting options

Your hob has various functions for setting the cooking time:

• Switch-off timer
• Timer
• Count-up timer

Switch-off timer
Allows you to program a cooking time for one or more cooking zones. Once the time has elapsed, the cooking zone is automatically switched off.

Switching on Switch-off timer

1. Select the cooking zone and the power level.
2. Press ⁠.
   • The indicator for the hotplate will light up.
3. Set the time on the control panel.
   • To set a cooking time of less than 10 minutes, always touch 0 before you select the required value.
4. Press to confirm.
   • The cooking time begins to count down.
   • Once the cooking time has elapsed, the cooking zone switches itself off and an audible signal sounds.

Note: If a cooking time has been programmed in a cooking zone in which the PerfectFry Sensor is activated, the programmed cooking time will start to count down as soon as the selected temperature level has been reached.

Changing or switching off the Switch-off timer

1. Select the cooking zone and touch ⁠.
2. In the settings area, change the time or set it to delete the time.
3. Press to confirm.

Timer
Enables the activation of a timer of 0–99 minutes. This function can be used independently of the cooking zones and other settings. It does not automatically switch off the cooking zones.

Switching on Timer

1. Touch ⁠.
2. Set the desired time on the control panel.
3. Press to confirm.
   • The time will begin to elapse.
   • An audible signal sounds once the time has elapsed.

Changing or switching off the Timer

1. Touch .
2. In the settings range, change the time or set to to delete the time.
3. Press to confirm.

Count-up timer
The stopwatch function displays the time that has elapsed since activation.

Switching on Count-up timer

• Touch ⁠.
• The time will begin to elapse.

Switching off Count-up timer

1. Touch . The stopwatch stops. The timer displays remain lit.
2. Touch . The displays go out.

PowerBoost

• You can use this function to heat up large volumes of water more quickly than with 9⁠.
• This function is available for all cooking zones, provided the other cooking zone in the same group is not in use.

Switching on PowerBoost

1. Select the cooking zone.
2. Touch . The display lights up.
   • The function is switched on.

Note: You can also switch on this function when cooking with a connected FlexZone.

Switching off PowerBoost

1. Select the cooking zone.
2. Touch ⁠. The ⁠ display goes out and the cooking zone switches back to the9 power level.
   • The function has been deactivated.

Note: In certain circumstances, this function may switch itself off automatically in order to protect the electronic elements inside the hob.

PanBoost
You can use this function to heat up pans more quickly than with 9⁠.
This function is available for all cooking zones, provided the other cooking zone in the same group is not in use.

Recommended applications

• Do not place a lid on the pan.
• Never leave pans unattended when they are heating up.
• Only use cold pans.
• Use pans with a completely flat base. Do not use pans with a thin base.

Switching on PanBoost

1. Select the cooking zone.
2. Touch ⁠ twice. lights up.
   • The function is switched on.

Note: You can also switch on this function when cooking with a connected FlexZone.

Switching off PanBoost

1. Select the cooking zone.
2. Touch ⁠. ⁠ goes out and the cooking zone switches back to the9 power level.
   • The function has been deactivated.

Note: To avoid high temperatures, this function automatically switches itself off after 30 seconds.

Keep-warm function
You can use this function to melt chocolate or butter and to keep meals warm.

Switching on Keep-warm function

1. Select the required cooking zone.
2. Touch within the next 10 seconds. lights up.
3. The function is switched on.

Switching off Keep-warm function

1. Select the cooking zone.
2. Touch . goes out.
   • The function has been deactivated.

Transfer settings
You can use this function to transfer the power level and the programmed cooking time from one cooking zone to another.

Transfer settings
Requirement: Move the cookware to a cooking zone which is not switched on, which you have not yet preset and on which no other cookware has been placed.

• Move the cookware.

• The cookware is detected and the previously selected power level and flash alternately on the display for the new cooking zone.
• Select the new cooking zone to implement the settings. The appliance sets the power level for the original cooking zone to ⁠.
• The settings are transferred to the new cooking zone.

Note: If you place a new item of cookware on a different cooking zone before you have confirmed the settings, you can use this function for both items of cookware.

PerfectFry Sensor
Suitable for cooking or reducing sauces, pancakes or frying eggs with butter, for frying vegetables or steaks up to the required level of boiling, and for keeping the temperature under control.
Instead of frequently adjusting the power level during cooking, select the required target temperature once at the start. The sensors under the glass ceramic measure the temperature of the cookware and keep this constant throughout the entire cooking process. This function is available on all cooking zones marked with this symbol ⁠.

Advantages

• The temperature is automatically kept constant without you having to change the power level.
• Oil does not overheat. This prevents the food from burning.
• The cooking zone only continues heating for as long as this is necessary to maintain the temperature. This saves energy.

Temperature levels
Temperature levels for preparing meals.

Recommended cookware
Special cookware has been developed for this function, which delivers the best results.
The recommended cookware is available from customer service, specialist retailers or our online shop  www.bosch-home.com.
Note: You can also use other cookware. Depending on the composition of the cookware, the achieved temperature may differ from the selected temperature level.

Switching on the PerfectFry Sensor

1. Place empty cookware on the cooking zone.
2. Select the cooking zone and touch ⁠.
3. Within the next 10 seconds, select the required temperature setting on the control panel.
   • The functions starts. flashes until the set target temperature is reached.
   • Once the target temperature has been reached, a signal tone sounds and stops flashing.
4. Add the frying fat and then the food to the frying pan.

Note: If you need to cook with more than 250 ml oil, add the oil and wait a few seconds before you add the food.

Switching off PerfectFry Sensor

• Select the cooking zone and touch ⁠.
• The function has been deactivated.

Recommendations for cooking with PerfectFry Sensor
The following table shows the ideal temperature levels for a selection of dishes. The temperature and the cooking time depend on the amount, condition and quality of the food.

Childproof lock
The hob is equipped with a childproof lock. This prevents children from switching on the hob.

Switching on Childproof lock
Requirement: The hob must be switched off.

• Touch ⁠.
• Touch and hold for 4 seconds.
• The display lights up for 10 seconds.
• The hob is locked.

Switching off Childproof lock

• Touch ⁠.
• Touch and hold for 4 seconds.
• The lock is released.

Automatic childproof lock
You can also activate the childproof lock automatically every time the hob is switched off. You can find out how to switch the function on and off in the “Basic settings”

Wipe protection
Allows the control panel to be locked for cleaning so that the settings are not inadvertently adjusted. The lock has no effect on the main switch.

Switching on Wipe protection

• Press . A warning tone sounds and lights up.
• The control panel remains locked for 35 seconds. A signal tone sounds 5 seconds before the appliance is switched off.

Switching off Wipe protection

• To switch off the function early:
• touch ⁠.
• The control panel is unlocked.

Individual safety switch-off
The safety function is activated if one cooking zone is in operation for an extended period and you do not change any settings. The cooking zone displays F8 and switches itself off.

The time from 1 to 10 hours depends on the selected power level. Press any button to switch on the cooking zone.

Basic settings
You can configure the basic settings for your appliance to meet your needs.

Overview of the basic settings

Cookware test
The quality of the cookware has a major influence on the speed and the result of the cooking process. You can use this function to test the quality of the cookware. Before the test, ensure that the size of the cookware base corresponds to the size of the cooking zone being used.
Access is via the basic settings.

Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is set in such a way that only the individual item of cookware is checked.

1. At room temperature, place the cookware with approx. 200 ml water in the centre of the cooking zone that best fits the base of the cookware in terms of size.
2. Call up the basic settings and select C12⁠ ⁠ ⁠.
3. Touch the settings area. The ⁠ display flashes in the cooking zones.
   • The test is running.
   • After 10 seconds, the result appears in the cooking zone displays.

Checking the result
You can see what the result means for the quality and speed of the cooking process in the following table.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.

Cleaning products
You can obtain suitable cleaning products and glass scrapers from customer service, a retailer or the online shop www.bosch-home.com.

ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appliance.

• Never use unsuitable cleaning products.
• Do not use cleaning products while the hob is still hot. This may cause marks on the surface.

Unsuitable cleaning products

• Undiluted detergent
• Detergent intended for dishwashers
• Abrasive cleaning products
• Aggressive cleaning products such as oven spray or stain remover
• Abrasive sponges
• High-pressure or steam jet cleaners

Cleaning the hob
Clean the hob after every use to stop cooking residues from getting burnt on.
Requirement: The hob must be cold. Do not allow the hob to cool down if it has sugar stains, rice starch, plastic or aluminium foil on it.

1. Remove heavy soiling using a glass scraper.
2. Clean the hob with a cleaning agent for glass ceramic.
   Follow the cleaning instructions on the packaging of the cleaning agent.

Tips

• You can achieve good cleaning results using a special sponge for glass ceramic.
• If you keep the base of the cookware clean, the hob surface remains in a good condition.

Cleaning the hob surround
If the hob frame is dirty or stained after use, clean this.
Note: Do not use a glass scraper.

1. Clean the hob frame with hot soapy water and a soft cloth.
   Wash new sponge cloths thoroughly before use.

2. Dry with a soft cloth.

Troubleshooting

• You can rectify minor faults on your appliance yourself.
• Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.

WARNING ‒ Risk of injury!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• If the appliance is defective, call Customer Service. → “Customer Service

WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.

Warnings
Notes

• If E⁠ appears in the displays, press and hold the sensor for the respective cooking zone and read the fault code.
• If the fault code is not listed in the table, disconnect the hob from the power supply and wait 30 seconds before reconnecting it. If this display appears again, contact the technical after-sales service and specify the exact fault code.
• If an error occurs, the appliance does not switch to standby mode.
• In order to protect the appliance’s electronic parts from overheating or surge currents, the hob may temporarily reduce the power level.

Information on the display panel

Normal noises from your appliance
An induction hob may sometimes cause noises or vibrations, such as buzzing, crackling, hissing noises, fan noises or rhythmic noises.

Disposal
Disposing of old appliance

Valuable raw materials can be reused by recycling.

1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally friendly manner.

Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service
Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.
Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance.
The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

Product number (E-Nr.) and productionnumber (FD)

You can find the product number (E-Nr.) and the pro-duction number (FD) on the appliance’s rating plate.
The rating plate can be found:

• on the appliance certificate.
• on the lower section of the hob.

The product number (E no.) can also be found on theglass ceramic. You can also display the customer ser-vice index (KI) and the production number (FD) in thebasic settings. → Page 14
Make a note of your appliance’s details and the Cus-tomer Service telephone number to find them againquickly.

Test dishes
These recommended settings are intended for test in-stitutes to facilitate the testing of our appliances. Thetests were carried out using our cookware sets for in-duction hobs. If required, these accessory sets can bepurchased at a later point from specialist retailers, orthrough our technical after-sales service or our onlineshop.

Melting the chocolate coating

• Ingredients: 150 g dark chocolate (55% cocoa).
• 16 cm saucepan without lid
• Boiling: Power level 1.5

Heating and keeping lentil stew warm
Recipe in accordance with DIN 44550 Initial temperature 20 °C
Heating up without stirring

• 16 cm saucepan with lid, amount: 450 g
• Heating up: Duration 1 min. 30 sec., power level9
• Simmering: Power level 1.5
• 20 cm saucepan with lid, amount: 800 g
• Heating up: Duration 2 min. 30 sec., power level9
• Simmering: Power level 1.5

Heating and keeping lentil stew warm
E.g.: Lentil diameter 5–7 mm. Initial temperature 20 °C Stir after heating for 1 minute

• 16 cm saucepan with lid, aount: 500 g
• Heating up: Duration approx. 1 min. 30 sec.,power level 9
• Simmering: Power level 1.5
• 20 cm saucepan with lid, amount: 1 kg
• Heating up: Duration approx. 2 min. 30 sec.,power level 9
• Simmering: Power level 1.5

Béchamel sauce
Milk temperature: 7 °C

• 16 cm saucepan without lid, ingredients: 40 g but-ter, 40 g flour, 0.5 l milk with 3.5% fat content and apinch of salt

Preparing Béchamel sauce

• Melt the butter, stir in the flour and salt, and heat upthe mixture.
• Heating up: Duration 6 min., power level 2
• Add the milk to the roux and bring to the boil, stir-ring continuously.
• Heating up: Duration 6 min. 30 sec., power level 7
• Once the Béchamel sauce comes to the boil, leave it on the cooking zone for a further two minutes.
• Simmering: Power level 2

Cooking rice pudding with the lid on
Milk temperature: 7 °C

1. Heat the milk until it starts to rise up. Heat up withouta lid. Stir after heating for 10 min.
2. Set the recommended power level and add rice,sugar and salt to the milk.
   The cooking time, including heating up, is approx. 45minutes.

• 16 cm saucepan, ingredients: 190 g short-grainrice, 90 g sugar, 750 ml milk with 3.5% fat contentand 1 g salt
• Heating up: Duration approx. 5 min. 30 sec.,power level 8.5
• Simmering: Power level 3
• 20 cm saucepan, ingredients: 250 g short-grainrice, 120 g sugar, 1 l milk with 3.5% fat content and1.5 g salt
• Heating up: Duration approx. 5 min. 30 sec.,power level 8.5
• Simmering: Power level 3, stir after 10 minutes

Cooking rice pudding without a lid
Milk temperature: 7 °C

1. Add the ingredients to the milk and heat the mixtureup while stirring continuously.
2. Once the milk has reached approx. 90 °C, select therecommended power level and leave it to simmer on alow heat for approx. 50 minutes.

• 16 cm saucepan without lid, ingredients: 190 gshort-grain rice, 90 g sugar, 750 ml milk with 3.5%fat content and 1 g salt
• Heating up: Duration approx. 5 min. 30 sec.,power level 8.5
• Simmering: Power level 3
• 20 cm saucepan without lid, ingredients: 250 gshort-grain rice, 120 g sugar, 1 l milk with 3.5% fatcontent and 1.5 g salt
• Heating up: Duration approx. 5 min. 30 sec.,power level 8.5
• Simmering: Power level 2.5

Cooking rice
Recipe in accordance with DIN 44550
Water temperature: 20 °C

• 16 cm saucepan with lid, ingredients: 125 g long-grain rice, 300 g water and a pinch of salt
• Heating up: Duration approx. 2 min. 30 sec.,power level 9
• Simmering: Power level 2
• 20 cm saucepan with lid, ingredients: 250g long-grain rice, 600 g water and a pinch of salt
• Heating up: Duration approx. 2 min. 30 sec.,power level 9
• Simmering: Power level 2.5

Roasting a pork loin
Initial temperature of the loin: 7 °C

• 24 cm pan without lid, ingredients: 3 pork loins,total weight approx. 300 g, 1 cm thick, and 15 gsunflower oil
• Heating up: Duration approx. 1 min. 30 sec.,power level 9
• Simmering: Power level 7

Preparing crêpes
Recipe in accordance with DIN EN 60350-2

• 24 cm pan without lid, ingredients: 55 ml batter percrêpe
• Heating up: Duration 1 min. 30 sec., power level9
• Simmering: Power level 7

Deep-fat frying frozen chips

• Pot dia. 20 cm without lid: ingredients: 2 l sunfloweroil. For each frying time: 200 g frozen chips, 1 cmthick.
• Heating up: Power level 9, until the oil temperat-ure reaches 180 °C.
• Simmering: Power level 9

Thank you for buying a Bosch Home Appliance!

Register your new device on MyBosch now and profit directly from:

• Expert tips & tricks for your appliance
• Warranty extension options
• Discounts for accessories & spare-parts
• Digital manual and all appliance data at hand
• Easy access to Bosch Home Appliances Service
• Free and easy registration – also on mobile phones:
• www.bosch-home.com/welcome.

Looking for help? You’ll find it here.

• Expert advice for your Bosch home appliances, help with problems
• or a repair from Bosch experts.
• Find out everything about the many ways Bosch can support you:
• www.bosch-home.com/service
• Contact data of all countries are listed in the attached service directory.

CONTACT

• BSH Hausgeräte GmbH
• Carl-Wery-Straße 34
• 81739 München, GERMANY
• www.bosch-home.com
• A Bosch Company

Valid within Great Britain:

• Imported to Great Britain by BSH Home Appliances Ltd.
• Grand Union House
• Old Wolverton Road
• Wolverton, Milton Keynes
• MK12 5PT
• United Kingdom

References

• Home Appliances Global Website | Bosch
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>