Fucoda B0CNQ2SVPR 2 Light Vanity Instruction Manual

Fucoda B0CNQ2SVPR 2 Light Vanity

CAUTION

• Inspect the wire insulation for any cuts, in the wire, do not attempt installation.
• Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

TOOLS REQUIRED

GENERAL
Remove all parts and hardware from the box and make sure that none are missing by referencing the illustrations.

STEP1
Connect the two bracket tubes to the lamp body.

STEP2
Connect the lamp body to the Metal Backplate.

STEP3

Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.

ASSEMBLY INSTRUCTIONS (INSTALLATION)

STEP4
Attach the fixture to the mounting unit through screw holes as shown, and secure it with ball nuts.

STEP5
Attach the cover and glass shade to the fixture.

STEP6

Install bulbs (not included).

Documents / Resources

| Fucoda B0CNQ2SVPR 2 Light Vanity [pdf] Instruction Manual
B0CNQ2SVPR 2 Light Vanity, B0CNQ2SVPR, 2 Light Vanity, Vanity
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>