HomeHome App ESP01V2 Mini Relay Thermostat Installation Guide
- June 17, 2024
- HomeHome App
Table of Contents
Device ID: XXXXXX
ESP01V2 Mini
Relay / Thermostat
HomeHome.App Installation
Attention 220 AC is very dangerous, get help from an electrician to connect 220 AC wires to the device. When you power up the device, it will broadcast HomeHome-XXXXXX WiFi network. Password:”homehome” Please use iPhone-iPad or an Android device for setup.
ATTENTION: IF YOU DID NOT GET THE DEVICE WITH TEMPERATURE SENSOR; DO
NOT TRY TO ADD THE SENSOR, IT WILL NOT WORK!
MANIPULATE TEMPERATURE VALUE FEATURE
HomeKit can show temp between -50C to +125C. You can use the waterproof
temperature sensor in hot water.
Real temperature will be divided by coefficient number. Enter a coefficient number
between 1-10 in local HTTP SERVER’s setting page (10.step). Example: real
temp is 60C, enter coefficient number=2.5. System will show 60/2.5=24C.
Setup
You will see captive portal for device setup. If it doesn’t start, disconnect
from WiFi and unplug-plug the device, reconnect to WiFi.
- Select device type: ESP01 1X Relay V2 On-Off Mode or ESP01 1X Relay V2 Thermostat mode
- Select switch type: Momentary or Toggle for On-Off Mode – Thermostat do not have physical button
- Enter your GMAIL address which you use in your Android Phone
- Enter a static IP (optional) We recommend you set it now or you will have to reset the device and re-start this setup OR you can manage your static IP with your router if it has a static ip feature.
- Select your Home WiFi and enter it’s password. If it is not in the list, you can enter SSID manually. Be sure that you write correct password or it will not connect to your network!
Q:What happens when my router is off?
A:Device will try to connect a few minutes and begin to broadcast it is own
network (HomeHome-XXXXXX) 6-Save settings and wait 3 seconds. Unplug and plug
the device.
Apple HomeKit Setup
7-You can pair HomeKit in 90 seconds after restart, pair code is 111-88-111
Select your room and a name for your device.
If you will not use HomeKit, wait 3 minutes for 3 led blink. Enter your device
ip (step 10) to a web browser. Enter your full gmail address to connect http
server. Click “Settings” button and activate “Skip HomeKit Pair Standby Time”
Click “Restart Device” button.
Extra Feature for Thermostat
Your device will be shown as a Thermostat and we also added a “virtual switch”
which makes easier to make scenes. Virtual switch directly controls the on-off
relay.
Google Home Setup
8-Open Google Home app from your Android phone.
Tap +> Set up device> Works with Google> ”+HomeHome”> Login
Important : For using Google Home; Please write your gmail address and
device id (XXXXXX) to info@homehome.app which is
required for activating your device.
Be sure that your gmail address is the same with “Android phone account”,
“+HomeHome login account”, “Device setup” (step 3), “WEB UI Setup” (step 9)
WEB UI setup – https://smart.homehome.app 9-You must register your device.
Sign-in with the same gmail account. Click “Manage” tab and activate Device
ID:XXXXXX unplug-plug or restart the device from http server.
HTTP Server
10-Enter IP address of your device to a web browser.
Q:Where to find IP?
A: -Long press to accessory in HomeKit app and see ip of the device.
-You can find XXXXXX in your router’s DHCP list (MAC address)
Enter your full gmail address (with@gmail.com)
Plug the device wait a few minutes and talk to Siri “What is the temperature
of my room?” also try Google Assistant. You can get humidity value by voice
command. Check HomeKit by long press to Thermostat > details to see humidity
value % 3.Party Apps
You can control HomeHome. App with 3th party apps. Your email adress must be
gmail so don’t add@gmail.com for HTTP GET request.
-
Turn on 1. relay: ‘https://ip.address/1/on?myEmail‘
-
Turn off 1. relay: ‘https://ip.address/1/off?myEmail‘
All state replies are in array for example: [0,1,2,2] 0 –> off , 1 –> on , 2 –> none -
Get all relay states: ‘https://ip.address/all?myEmail‘ 1-2-4 relay devices are using the same firmware so we push all together. You can easly understand this is a 2 relay device. First relay is off, second relay is on in this example.
Extra Features:
- Mini Size: 45 x 28 x 15 mm/1.77 x 1.1 x 0.59 inches.
- Auto Off relay 1 (1 second -18 hours) see settings in http local server
- Remote control with HomeKit: You can use HomeKit without leaving an iPad-Home Pod-Apple TV in your home.
- You can control your device with “Hey Siri”,”OK Google”
- Make Scenes or Routines for full automation.
- OTA – Over the air update will be published if needed.
- You can turn off local HTTP server for security.
- You can change device name in local HTTP server settings for WEB UI and Google Home.
- “Turn Back” Switch to last position on power failure.
- “Local Mode” Set device work offline (without internet) If enabled you can not use Google Home and Web interface.You must first register the device (with internet connection) to use this feature.You can use HomeKit (if paired) and local interface (HTTP server) to control the device. Note that device must always join to a router.
- Long press to accessory in HomeKit app and see ip of the device.
NO:NORMALLY OPEN
COM:COMMON
NC:NORMALLY CLOSE
download PDF
http://homehome.app/supporttranslate.google.com
+44 736-784-6094
Please Write for Help
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>