HomeHome App Sono TX HomeKit Google Home Smart Home Installation Guide
- June 17, 2024
- HomeHome App
Table of Contents
Sonoff TX
HomeHome.App Installation
Attention 220 AC is very dangerous, get help from an electrician to connect
220 AC wires to the Sonoff device. When you power up the device, it will
broadcast HomeHome-XXXXXX WiFi network. Password:” homehome” Device LED will
NOT blink when it gets power. After this setup finished, normal working
process; LED will blink after 30 seconds (3 times) when device restarts.
Setup
You will see captive portal for device setup. If it doesn’t start,
disconnect from WiFi and unplug-plug the device, reconnect to WiFi.
- Select device type:”Sonoff TX Double Switch OR as Sonoff TX Roller Shutter/Blind ”
- Select switch type: Momentry
- Enter your GMAIL address which you use in your Android Phone
- Enter a static IP (optional) We recommend you set it now or you will have to reset the device and re-start this setup OR you can manage your static IP with your router if it has a static ip feature.
- Select your Home WiFi and enter it’s password. If it is not in the list, you can enter SSID manually. Be sure that you write correct password or it will not connect to your network!
Q:What happens when my router is off?
A:Device will try to connect a few minutes and begin to broadcast it is own
network (HomeHome-XXXXXX)
6-Save settings and start Apple HomeKit application and add accessory.
Wait 1-2 minutes it will try auto registration to HomeHome.app +++Roller
Shutter/Blind setup : Set open-close time in http local server. See 10.step+++
X-HM://001451BWVHOME
Apple HomeKit Setup
7-You can pair HomeKit in 90 seconds after restart, pair code is 111-88-111
Select your room and a name for your device. Important: Unplug and plug the
device after succesful pairing.
If you will not use HomeKit, wait 3 minutes for 3 led blink. Enter your device
ip (step 10) to a web browser. Enter your full gmail address to connect http
server. Click “Settings” button and activate “Skip HomeKit Pair Standby Time”
Click “Restart Device” button.
Google Home Setup
8-Open Google Home app from your Android phone.
Tap +> Set up device> Works with Google> ” +HomeHome”> Login
Important : For using Google Home; Please write your gmail address and
deviceid ( X X X X X X ) to [email protected]
which is required for activating your device.
Be sure that your gmail address is the same with “Android phone account”,
“+HomeHome login account”, “Device setup” (step 3), “WEB UI Setup” (step 9)
WEB UI setup – https://smart.homehome.app
9-You must register your device, Sign-in with the same gmail account. Click
“Manage” tab and activate Device ID:XXXXXX unplug-plug or restart the device
from http server.
HTTP Server
10-Enter IP address of your device to a web browser.
Q:Where to find IP?
A: -Long press to accessory in HomeKit app and see ip of the device.
-You can find XXXXXX in your router’s DHCP list (MAC address)
Enter your full gmail address ([email protected])
3.Party Apps
You can control HomeHome. App with 3th party apps. Your email adress must be
gmail so don’t [email protected] for HTTP GET request.
-
Turn on 1. relay: ‘https://ip.address/1/on?myEmail‘
Turn off 1. relay: ‘https://ip.address/1/off?myEmail‘
All state replies are in array for example: [0,1,2,2
0 –> off , 1 –> on , 2 –> none -
Get all relay states: ‘https://ip.address/all?myEmail‘
1-2-4 relay devices are using the same firmware so we push all together. You can easly understand this is a 2 relay device. First relay is off, second relay is on in this example.
[Sonoff Touch 433MHz]
Important: Since your RESET button (gpio 0) is the same with 1.Button
(gpio 0) Do not hold the 1. Button 10 seconds or it will clear all the
settings and begin to broadcast it’s WiFi network (HomeHome-XXXXXX) 433 RF
Learn: Press and hold the 1.button of Touch switch 3 seconds, you will hear a
sound. Long press your 433MHz remote button. Make the same operation for
2.button. 433 RF Clear: Press and hold the 1.button of Touch switch 5 seconds,
you will hear a longer sound and stop. Make the same operation for 2.button.
Extra Features:
- Remote control with HomeKit: You can use HomeKit without leaving an iPad-Home Pod-Apple TV in your home.
- You can control your device with “Hey Siri”,”OK Google”
- Make Scenes or Routines for full automation.
- OTA – Over the air update will be published if needed.
- You can turn off local HTTP server for security.
- You can change device name in local HTTP server settings for WEB UI and Google Home.
- “Turn Back” Switch to last position on power failure.
- “Local Mode” Set device work offline (without internet) If enabled you can not use Google Home and Web interface.You must first register the device (with internet connection) to use this feature.You can use HomeKit (if paired) and local interface (HTTP server) to control the device. Note that device must always join to a router.
- Long press to accessory in HomeKit app and see ip of the device. Support https://homehome.app/support For more help: [email protected]
We are such stuff as dreams are made on…
PLEASE WRITE YOUR FEEDBACK &
ASK FOR PROMO CODE ON YOUR NEXT ORDER
download PDF http://homehome.app/supporttranslate.google.com
+44 736-784-6094
Please Write for Help
References
- HomeHome.App Apple HomeKit Google Home Smart Home Manuls
- HomeHome.App Apple HomeKit Google Home Smart Home Manuls
- HomeHome.App - WEB UI