AORUS C700 Glass Features PC Case Key Installation Guide

: June 17, 2024
: Aorus

Table of Contents

AORUS C700 Glass Features PC Case Key Installation
Product Information
Product Usage Instructions
Assembly Drawing
INSTALLATION GUIDE
I / O Connectors
Remove the panels
Maximum compatibility
ACCESSORY KIT
Install the vertical graphics card
Install the power supply
RGB & Fan control system
Install water cooling radiators & cooling fans
Install the internal 2.5″ SSDs & 3.5″ HDDs
Documents / Resources

AORUS C700 Glass Features PC Case Key Installation

Product Information

Specifications:

Model: Unknown
Standards: GB/T 26572, RoHS
Connectivity: USB-C 3.1, HDMI
Features:
- Side Panel
- I/O panel
- Front panel
- Tempered glass side panels
- Vertical and horizontal graphics card installation
- Top panel
- Detachable dust filter
- PSU mounting plate
- 3.5/2.5 drive bays
- 2.5 drive bays
- PWM fans (Pre-installed 120mm*3)
- ARGB & PWM fans (Pre-installed 120mm*2)

Product Usage Instructions

Remove the panels:
To access the internal components of the product, follow these steps:

Top Panel: Remove the top panel by unscrewing the screws labeled “Screw – A”.
Front Panel: Remove the front panel by unscrewing the screws labeled “Screw – B”.
*Be careful when handling the tempered glass panel.

Install the vertical graphics card:
If you want to install a vertical graphics card, you will need to use a PCIE riser cable (not included). Follow these steps:

Connect one end of the PCIE riser cable to the graphics card and the other end to the appropriate slot on the motherboard.

Install the power supply:
To install the power supply, follow these steps:

Place the power supply unit (PSU) in the designated PSU mounting plate.
Secure the PSU in place using the screws labeled “Screw – A”.

Cable management:
To manage the cables inside the product, follow these steps:

Route the cables neatly and secure them using cable ties.
For PCI-E riser cable installation, plug in the PCI-E riser cable before installing the graphics card.
For better cable management, refer to the product manual for specific instructions.

RGB Fusion 2.0:
The product features RGB Fusion 2.0 with customizable color options and various lighting effects. Follow these steps to set up RGB lighting:

Use the included hub to connect the ARGB and PWM fans.
Refer to the provided image for hub connectivity.
Connect the ARGB fans to the ARGB connectors on the hub.
Connect the PWM fans to the PWM connectors on the hub.
Connect the hub to the motherboard using the provided cables.

Install the internal SSDs and HDDs:
To install the internal SSDs and HDDs, follow these steps:

For 2.5″ SSDs: Use the screws labeled “Screw – B” to secure the SSDs in the designated 2.5″ cage.
For 3.5″ HDDs: Use the screws labeled “Screw – B” to secure the HDDs in the designated 3.5″ cage.
Note: The 3.5″ drive bay can be disassembled if more space is needed for installing a radiator or PSU.

FAQ

Q: Does the product support vertical graphics card installation?
A: Yes, the product supports both vertical and horizontal graphics card installation.
Q: What do I need to install a vertical graphics card?
A: To install a vertical graphics card, you will need a PCIE riser cable (not included).
Q: How do I manage the cables inside the product?
A: You can manage the cables by routing them neatly and securing them with cable ties. For better cable management, refer to the product manual for specific instructions.
Q: How do I set up RGB lighting using RGB Fusion 2.0?
A: To set up RGB lighting, use the included hub to connect the ARGB and PWM fans. Connect the hub to the motherboard following the provided instructions.
Q: Can I replace a 3.5″ HDD with a 2.5″ SSD?
A: Yes, the 3.5″ drive bay can be disassembled, allowing you to replace it with a 2.5″ SSD if needed.

Assembly Drawing

A I/O panel
B Front panel
C Tempered glass side panels
D Vertical and horizontal graphics card Installation
E Top panel
F Detachable dust filter
G PSU mounting plate
H 3.5”/2.5” drive bays
I 2.5” drive bays
J PWM fans (Pre-installed 120mm*3)
K ARGB & PWM fans (Pre-installed 120mm*2)

INSTALLATION GUIDE

Warranty
Gigabyte provides a limited product warranty. For the latest and current terms of the Limited Product Warranty, please visit http://www.gigabyte.com /support-downloads/customer-service.aspx.

WEEE Information
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU For more information, please contact the local authority or the retailer where you purchased the product.

Asia (Headquarters)
GIGA-BYTE TECHNOLOGY CO., LTD. Taiwan Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan Tel: +886-2-8912-4000 http://www.gigabyte.com

China
GIGABYTE CHINA Address: 24/F, Hai Tong Securities Tower, No.689 Guangdong Road, Shanghai, China Tel: +86-21-6340-0912

Europe
G.B.T. TECHNOLOGY TRADING GMBH Germany Address: Bullenkoppel 16, 22047 Hamburg, Deutschland Tel: +49-40-25 33 040

North America
G.B.T. INC. USA Address: 17358 Railroad Street, City of Industry, CA91748 USA Tel: +1-626-854-9338

I / O Connectors

RGB Lighting

Remove the panels

*Be careful when handling the tempered glass panel.

Maximum compatibility

Support vertical and horizontal graphics card installation

ACCESSORY KIT

Install the vertical graphics card

Requires the PCIE riser cable (not included) *Plug the PCI-E riser cable before installing the graphics card.

Install the power supply

RGB & Fan control system

RGB FUSION 2.0

With 16.7M customizable color options and numerous lighting effects, you can choose lighting effects or synchronize with other AORIJS devices.

Please use the included hub (refer to the below image) to connect the ARGB and PWM fans.
Users can control the RGB & Fan speed on the top 1/0 panel.
- Mode Button: Adjust the modes between RGB FUSION 2.0.
- RGB Button: Adjust the various colors.
- FAN ± Button: Adjust the fan speed by each level.

Install water cooling radiators & cooling fans

Install the internal 2.5″ SSDs & 3.5″ HDDs

3.5″ HDD can be replaced by 2.5″ SSD.

For 2.5″ cage

For 3.5″ Cage

Documents / Resources

| AORUS C700 Glass Features PC Case Key [pdf] Installation Guide
C700 Glass Features PC Case Key, C700, Glass Features PC Case Key, Features PC Case Key, PC Case Key, Case Key
---|---