ASUS RT-AC67P Dual Band AC Wi-Fi Router User Guide

: June 17, 2024
: Asus

Table of Contents

ASUS RT-AC67P Dual Band AC Wi-Fi Router
Package contents
Specifications
Wired connection
FREQUENTLY ASKED QUESTIONS
ASUS Recycling/Takeback Services
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ASUS RT-AC67P Dual Band AC Wi-Fi Router

Package contents

RT-AC67P Wireless
Router AC adapter
Network cable (RJ-45)
Quick Start Guide

A quick look at RT-AC67P

NOTES

Use only the adapter that came with your package.
Using other adapters may damage the device.

Specifications

Position your wireless router

For optimal wireless transmission between the wireless router and connected wireless devices, ensure that you:

Place the wireless router in a centralized area for maximum wireless coverage for the network devices.
Keep the wireless router away from metal obstructions and away from direct sunlight.
Always update to the latest firmware. Visit the ASUS website at http://www.asus.com to get the latest firmware updates.

Preparing your modem

Unplug the power cable/DSL modem. If it has a battery backup, remove the battery.
NOTE: If you are using DSL for the Internet, you will need your username/password from your Internet Service Provider (ISP) to properly configure the router.
Connect your modem to the router with the bundled network cable.
Power on your cable/DSL modem.
Check your cable/DSL modem LED lights to ensure the connection is active.

Setting up your RT-AC67P

You can set up your RT-AC67P via a wired or wireless connection.

Wired connection

Plug your router into a power outlet and power it on. Connect the network cable from your computer to a LAN port on your router.
The web GUI launches automatically when you open a web browser. If it does not auto-launch, enter http://router.asus.com.
Log into the Web GUI. By default, the login username and password for your wireless router’s Web GUI is admin.
Set up a password for your router to prevent unauthorized access.

Wireless connection

Plug your router into a power outlet and power it on.
Connect to the network with the SSID shown on the product label on the back side of the router.
For better network security, change to a unique SSID and assign a password.
You can choose either the web GUI or ASUS Router app to set up your router.
- Web GUI Setup
- Once connected, the web GUI launches automatically when you open a web browser. If it does not auto-launch, enter http://router.asus.com.
- Log into the Web GUI. By default, the login username and password for your wireless router’s Web GUI is admin.
- Set up a password for your router to prevent unauthorized access.
Download the ASUS Router App to set up your router via your mobile devices.
- Turn on Wi-Fi on your mobile devices and connect to your RT-AC67P’s network.
- Follow the ASUS Router App setup instructions to complete the setup.

FREQUENTLY ASKED QUESTIONS

Q1: Where can I find more information about the wireless router?

Technical support site: https://www.asus.com/support
Customer Hotline: refer to the Support Hotline section in this Quick Start Guide

Q2: Where can I submit feedback on the router?

App: Launch the ASUS Router App and go to Settings> System Settings > Feedback
Web: Log into the web GUl of your router and go to Advanced Settings > Administration > Feedback

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products on the ASUS REACH website at http://csr.asus.com/english/REACH.htm

Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARNING!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance. To maintain compliance with FCC exposure compliance requirements, please follow operation instructions as documented in this manual.
WARNING! This equipment must be installed and operated by provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance Statement of Innovation, Science and Economic

Development Canada (ISED)
This device complies with the Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-3(B)/NMB-3(B)
Radio Frequency (RF) Exposure Information The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner that the potential for human contact during normal operation is minimized. This equipment should be installed and operated with a minimum distance of 23 cm between the radiator and any part of your body. This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/eic/site /ceb-bhst.nsf/eng/h_tt00020.html Additional Canadian information on RF exposure also can be found on the following website: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.htmlFor product available in the US/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.

Safety Notices

Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
DO NOT place or drop objects on top and do not shove any foreign objects into the product.
DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
DO NOT cover the vents on the product to prevent the system from getting overheated.
DO NOT use damaged power cords, accessories, or other peripherals.
If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
To prevent electrical shock hazards, disconnect the power cable from the electrical outlet before relocating the system.
DO NOT mount this equipment higher than 2 meters.

Manufacturer ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
Authorised representative in Europe
ASUS Computer GmbH
Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY