Luminzone Flush Mount Ceiling Light with Frosted Glass Shade User Guide

Luminzone Flush Mount Ceiling Light with Frosted Glass Shade

Product Information

Specifications

• Part Included : A
• Part Description: Junction Box
• Quantity: 1

Assembly Steps

PASOS PARA ENSAMBLAR:

1. Connect the white supply wire to the white or identified fixture wire using UL listed wire nuts.
2. Connect the black supply wire to the plain or black fixture wire using UL listed wire nuts.
3. Connect the green or bare ground wire from the supply to the green ground screw.
4. Attach the single mounting bracket using the provided mounting screws.
5. Install the junction box, studs, ball nuts, leading wires, and socket according to the specific fixture shape and style.
6. Attach the canopy using the threaded rod.
7. Insert the light bulb into the socket.
8. Place the glass shade onto the fixture and secure it by twisting the metal finial.

Usage Instructions

Important Notice: This instruction sheet is generic and may vary depending on the fixture’s shape and style. The glass, shade, and diffuser may also vary.
To change the light bulb:

1. Hold up the glass shade.
2. Twist out the metal finial.

FAQ

1. What should I do if I have questions about using special control devices with the fixture?
    If you have any questions or need assistance regarding the use of special control devices with this fixture, please contact a qualified electric contractor.

SAFETY INSTRUCION

• Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
• Warning : California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
• Caution : Electrician installation highly recommended. All glass is fragile, use care when handling glass component(s) and or lamp(s). Read instructions carefully and turn electricity off at the main circuit breaker panel before beginning installation.
• Important Notice : This is a generic instruction sheet used for various fixtures. Fixture shape and style may vary. Glass, Shade, Diffuser shape and style may vary
• Important Notice : This is a generic instruction sheet used for various fixtures. Fixture shape and style may vary. Glass, Shade, Diffuser shape and style may vary

ASSEMBLY STEPS

Part Included

When you Change Bulb,you must be hold up glassshade first,then twist out the metal Finial.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>