MUBILIFE Q8 Bird Feeder Camera User Guide

MUBILIFE Q8 Bird Feeder Camera

Product Information

Specifications

• Product Name : Wireless Wifi Outdoor Spotlight
• FCC ID : 2AXBN-Q5
• Product Type : Bird Feeder Camera

Product Appearance

The product features a bird feeder with a built-in camera. It includes the following parts:

• Solar Panel
• Bird Camera
• Bird Feeding Area
• Bird Stand
• Antenna
• Power Cord for Charging
• Bird Feeder Bracket

Download & Install App

To use the camera, you need to download and install the ANLIFE App on your Android or iOS device. Follow the steps below:

1. Scan the QR code provided or search for “ANLIFE” in your device’s app store to download the app.
2. Once downloaded, open the app and follow the instructions to register an account.
3. If you encounter any issues during the installation process, please contact us at support@mubilife.net for assistance.

Account Registration

If you’re a new user, you’ll need to sign up for a new account using your email ID. Follow the steps below:

1. Click on “Sign up a New Account” in the app.
2. Enter your email and click “Next”.
3. Check your email for a verification code and enter it in the app.
4. Complete the registration process by following the remaining steps.

Add Camera to App

• Preparation for Connection

Before adding the camera to the app, make sure you have completed the following steps:

1. Ensure your smartphone is connected to a stable Wi-Fi network.
2. Power on the bird feeder camera and connect it to a power source using the provided power cord.
3. Make sure the camera’s indicator light is blinking.

Connect Camera to App

1. Open the ANLIFE App and log in to your account.
2. Tap on the “Add Camera” option.
3. Follow the on-screen instructions to connect the camera to the app. This may involve scanning a QR code or entering a unique camera ID.
4. Once the camera is successfully added, you can access its live feed and configure settings through the app.

Install Bird Feeder

To install the bird feeder, follow these steps:

1. Select a suitable location for the bird feeder.
2. Use the provided bracket and screws to securely attach the bird feeder to a wall or post.

Indicator Light Status

The indicator light on the camera provides important information about its status. Refer to the following guide:

• Blinking : The camera is in pairing mode and ready to be connected to the app.
• Solid : The camera is connected and working properly.
• Off : The camera is powered off or not receiving power.

Firmware Upgrade

To upgrade the camera’s firmware, follow these steps:

1. Ensure the camera is connected to the app.
2. Go to the camera settings in the app.
3. Check for any available firmware updates.
4. If an update is available, follow the on-screen instructions to upgrade the firmware.

FAQ

• Q: How do I register for a warranty extension?
  • A : To register for a 3-year warranty extension, visit the link provided: Warranty Extension Registration.
• Q: How can I contact customer support?
  • A : For product service and support, you can contact us via email at support@mubilife.net. For distributor inquiries, please email distributor@mubilife.net.
• Q: Where can I find more information about the company?
  • A : Visit our website at www.mubilife.net or follow us on Facebook at www.facebook.com/mubilifeofficial.

Packing List

Product Appearance

Bird Feeder Parts Name

Download & Install App

The camera supports Android and iOS systems.
Please scan the QR code below or search ‘ANLIFE’ in an App store to download the App, and follow the instructions to register an account. If you encounter any problems during the installation process, please feel free to contact us via support@mubilife.net

NOTE : Please turn on both of the following permissions.

1. Allow ANLIFE App to access mobile cellular data and wireless LAN, otherwise, it will fail to connect the camera.
2. Allow the ANLIFE App to receive pushed messages, otherwise, the phone will not receive alarms when motion is detected.

Account Registration

New users need to sign up by Email ID.
Click ‘Sign up a New Account’ and follow the steps to complete the registration.

Add Camera to App

• Preparation for Connection

1. Insert Mirco SD card when the camera is off(Supports up to 128GB SD card not included). We also provide 3-day cycle record for free (2 years limited time), the camera can work without SD Card.
2. The camera only works with 2.4GHz Wi-Fi, not support 5G.
3. Take the camera close to the router while connecting.
4. Keep pressing the power button for 2-4s to power on/off the camera.

Connect Camera to App

Install Bird Feeder

1. Select a good spot for your bird feeder:
   • Please choose a suitable place for your bird feeding device. It is best to be an active place with birds, but you need to ensure the coverage of the Wi-Fi network. Adjust the angle of the camera to cover as much of the bird-watching stand as possible.
2. Install the host
   • Assemble the upper cover: Turn the upper cover down so that it fastens onto the middle shell.
3. install the tray clamp  the material tray to the bottom of the main body of the equipment, put in 3 screws, and tighten it with a cross screwdriver. 
4. install an external antenna
5. 
   • Position the external antenna at the back antenna hole of the bird feeder and tighten the rotating antenna
   • Use a drill tool to drill holes in the wall according to the spacing of the brackets. lt is recommended to mark the holes on the wall with a pencil before drilling. Screw the expansion nut into the holes on the wall, and then connect the bracket to the expansion nut with screws to complete the fixing.
6. Screw fixing
   • Use a drill tool to drill holes in the wall according to the spacing of the brackets. lt is recommended to mark the holes on the wall with a pencil before drilling. Screw the expansion nut into the holes on the wall, and then connect the bracket to the expansion nut with screws to complete the fixing.
7. Installation of the bracket and Bird Feeder:
   • Tighten the hand screw with the screw hole at the bottom of the bird feeder through the iron bracket.

Indicator Light Status

Product Specification

Share Camera

A is the person who shares the camera; B is the person who is shared (Register own account).

1.  A enter the ‘Device info’ page and open the QR code.
2. B enters the ‘Home’ page and clicks ‘Add Friend’s Camera’, then scans A’s QR code. After A accepts sharing, sharing is complete!
   

Multi-Device Management

Reset Camera

1. Press the reset button with the pin.
2. Double-click the power button to enter connection mode again.

Firmware Upgrade

• When you connect your camera to the ‘LIFE’ App, it will prompt you if the latest firmware is available. You can also manually check the firmware upgrade in the ‘Advanced Setting’ of the App.
• Please make sure that your camera is fully charged or charging while upgrading the firmware, please do not cut off the power supply during upgradation.
• Please Email us for a Better Solution instead of returning any unqualified product to Amazon
• Support@mubilife.net

Warranty Service

Thanks for your shopping and trust.
We have been optimizing our products and improving our lifetime customer service to offer you a better shopping experience. If you have any problems, please feel free to send us an E-mail. We will solve your problems within 24 hours. In addition, your advice or suggestions will be much appreciated and welcomed.
Register via link below to get 3 year warranty Extension. https://rb.gy/qkcd2

Product Service

Email : Support@mubilife.net
Distributor : Distributor@mubilife.net

More About Us

• Web : www.mubilife.net
• Facebook: www.facebook.com/mubilifeofficial

References

• Mubilife | Wireless, Indoor & Outdoor HD Security Cameras

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>