ASUS VS229D LCD Monitor User Guide

: June 17, 2024
: Asus

ASUS VS229D LCD Monitor User Guide

Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Notices

Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: · This device may not cause harmful interference, and · This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

As an Energy Star® Partner, our company has determined that this product meets the Energy Star® guidelines for energy efficiency.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.

Safety information

Before setting up the monitor, carefully read all the documentation that came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or moisture.
Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
Use the appropriate power plug which complies with your local power standard.
Do not overload power strips and extention cords. Overloading can result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
To ensure satisfactory operation, in case use at a PC then it should use the monitor only with computers which have appropriate configured receptacles marked between 100-240V AC.
If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.
The wall socket shall be installed near the equipment and shall be easily accessible.

Care & Cleaning

Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord.
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

Where to find more information Refer to the following sources for additional information and for product and software updates.

ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com
Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.

3.1 Welcome!

Thank you for purchasing the ASUS® VS229/VS239 Series LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the VS229/VS239 Series brings you!

3.2 Package contents

Check your VS229/VS239 Series LCD monitor package for the following items:
✔ LCD monitor
✔ Monitor base
✔ Quick start guide
✔ 1 x Power cord
✔ 1 x VGA cable
✔ 1 x DVI cable (Only for some models)
✔ 1 x Warranty card

If any of the above items is damaged or missing, contact your retailer immediately.

3.3 Assembling the monitor base

To assemble the monitor base:

Attach the base to the arm and fix with the screw to join them tightly.
You can easily tighten the screw by fingers.
Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

3.4 Connecting cables

To connect cables: Connect the cables you need based on chapter 1.5.2, page1-5.

3.5 Monitor introduction

3.5.1 Front of the LCD monitor

3.5.2 Rear of the LCD monitor

AC-In
HDMI-In (Available for model VS229H, VS239H only)
DVI-In (Available for model VS229N/H, VS239N/H only)
VGA-In
Earphone-Out (Available for model VS229H, VS239H only)

3.5.3 QuickFit Function

The QuickFit function contains three patterns: (1) Grid (2) Paper size (3) Photo size.

Detaching the arm/stand (for VESA wall mount)

The detachable stand of the VS229/VS239 Series LCD monitor is specially designed for VESA wall mount.
To detach the arm/stand:

Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table.
Use your fingers gently pull away the plate that covers the stand neck. Use a screwdriver to remove the four screws that secure the stand to the monitor.
Detach the stand from the monitor.
· We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
· Hold the stand of the monitor while removing the screws.

The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/ load according to the model listed in the specification table (Screw size: M4 x 10 mm).

4.1 Adjusting the monitor

For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.
Hold the stand to prevent the monitor from falling while changing its angle.
You can adjust the monitor’s angle from -5° to 20°.

How to reconfigure

OSD Function Introduction

Splendid This function contains six sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.
· Scenery Mode: This is the best choice for scenery photo displaying with SPLENDIDTM Video Enhancement.
· Standard Mode: This is the best choice for document editing with SPLENDIDTM Video Enhancement.
· Theater Mode: This is the best choice for movie watching with SPLENDIDTM Video Enhancement.
· Game Mode: This is the best choice for game playing with SPLENDIDTM Video Enhancement.
· Night View Mode: This is the best choice for playing darkscene game or watching movie with SPLENDIDTM Video Enhancement.
· sRGB: This is the best choice for viewing photos and graphics from PCs.
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and ASCR functions are not user-configurable. In the sRGB, the Brightness, Contrast, Saturation, Color Temp., Skin Tone, Sharpness, and ASCR functions are not userconfigurable.
Color Select the image color you like from this function.
· Brightness: The adjusting range is from 0 to 100. The button is also a hotkey to activate this function.
· Contrast: The adjusting range is from 0 to 100.
· Saturation: The adjusting range is from 0 to 100.
· Color Temp.: Contain three preset color modes (Cool, Normal, Warm) and one User Mode.
· Skin Tone: Contain three color modes including Reddish, Natural, and Yellowish.
· Smart View: Enable a clearer visibility after tilted the screen.
Image You can adjust the image Sharpness, Aspect Control, Position (VGA only), and Focus (VGA only) from this main function.
· Sharpness: Asjust the picture sharpness. The adjusting range is from 0 to
(Only available for selecting “Standard Mode” in Splendid menu.)
· Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100. (Available for model VS229H-P,VS239H-P only).
· Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or “Over Scan”. (The “Over Scan” ratio is only available for HDMI input.)
· ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function. (ASCR: ASUS Smart Contrast Ratio. Disabled at “Standard Mode”.)
· Position: Adjust the horizontal postition (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100. (Only available for VGA input.)
· Focus: Reduce Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to
(Only available for VGA input.)
Input Select Select the input source from VGA, DVI, or HDMI.
· DVI: Available for model VS229N/H, VS239N/H only.
· HDMI: Available for model VS229H, VS239H only.
System Setup Adjust the system configuration.

Splendid Demo Mode: Activate the demo mode for the Splendid function.
Volume: Adjust the earphone output volume level. The adjusting range is from 0 to 100.(Available for model VS229H, VS239H only.)
ECO Mode: Activate the ecology mode for power saving. (Some gray levels may not be distinguished if ECO is ON. Its brightness is lower than that when setting the Contrast Ratio to 100.)
OSD Setup: Adjust the horizontal postition (H-Position), vertical position (V-Position), OSD Timeout, DDC/CI, and Transparency of the OSD screen.
Language: Select OSD language. The selections are English, French, German, Spanish, Italian, Dutch, Russian, Traditional Chinese, Simplified Chinese, and Japanese.
Information: Display the monitor information of Input Port, Resolution, H-freq., V-freq, and Model Name.
All Reset: Set to “Yes” to revert all settings to the factory default status.

5.1 Specifications

5.2 Troubleshooting (FAQ)

5.3 Supported Timing List

The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables.