BOSCH AE203R Universal Enclosure Red Instruction Manual
- May 15, 2024
- Bosch
Table of Contents
AE203R/D203
Enclosure
Installation Instructions
Description
The AE203R/D203 Enclosure houses many Bosch Security Systems peripheral modules and fire digital alarm communicator transmitters (DACTs). It is also compatible with an enclosure tamper switch.
Installation
-
Remove the desired wire knockouts in the enclosure and install the D110 Tamper Switch if required (Figure 1).
Figure 1: Wire Knockout Locations 1 – Left exterior
2 – Right exterior
3 – Tamper switch holes (3)
4 – Wire knockouts (5)
5 – Front
6 – Machine screw
7 – Self-tapping screw -
Ensure the enclosure in the position shown in Item 1 of Figure 2.
-
Using the mounting holes (Item 2 in Figure 2), attach the AE203R to the wall.
-
Mount the module or listed fire DACT to the enclosure using the supplied three-hole mounting pattern or mounting clips.
Figure 2: Mounting
- – Position the enclosure with this end up.
- – Mounting holes (2)
- – Enclosure lances (4)
- – Mounting holes (3)
Specifications
Table 1: Specifications
| Dimensions (H x W x D) | 5 in. x 2.5 in. (37 cm x 32 cm) |
|---|---|
| Color | AE203R (red) |
D203 (grey)
Tamper Switch| D110
Refer to the control panel literature or specific module literature for instructions on connecting to other devices.
Recycable
© 2006 Bosch Security Systems, Inc.
130 Perinton Parkway, Fairport, NY 14450-9199 USA
Customer Service:800-289-0096;
Technical Support: 888-886-6189
F01U012076B
Installation Instructions”
11/06
AE203R/D203
Page 2 of 2
Documents / Resources
|
BOSCH AE203R Universal Enclosure
Red
[pdf] Instruction Manual
AE203R Universal Enclosure Red, AE203R, Universal Enclosure Red, Enclosure
Red, Red
---|---