thdstatic ST2029 Side Table Instruction Manual

thdstatic ST2029 Side Table

Product Information

Specifications

• Model Numbers: ST2029, ST2030, ST2031
• Pre-Assembly Required: Yes
• Recommended Number of Assemblers: 2
• Country of Origin: China

Product Usage Instructions

Pre-Assembly

Before beginning assembly, it is recommended to have two people for this task. Carefully remove all parts and hardware from the carton, ensuring not to discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware. Set aside the hardware kit before discarding the packaging. Assemble the furniture on a soft surface to prevent scratching or damaging the parts during assembly.

Precautions

Read all precautions before beginning assembly:

1. Ensure the assembly is done on a level and soft surface, such as blankets, to prevent damaging the parts.
2. Do not overtighten screws to avoid damaging the furniture.

Assembly Steps

Note: Refer to the provided diagram for visual reference.

Step 1: Upside-Down Position

The furniture will be assembled in an upside-down position. Ensure that the assembly is done on a level and soft surface to prevent damaging the parts during assembly.

Step 2: Attach Part A to Part B

Using 4 screws (X4), attach Part A to Part B. Do not overtighten the screws.

Step 3: Attach Part C to Parts A and B

Using 8 screws (X8), attach Part C to both Part A and Part B. Avoid overtightening the screws.

Step 4: Recheck and Adjust

If necessary, recheck the assembled parts and make any necessary adjustments to ensure proper alignment and stability.

FAQ

• Q: How many people are recommended for assembly?
• A: Two people are recommended for assembling this furniture.
• Q: Where is this product made?
• A: This product is made in China.
• Q: Are any special precautions to be taken during assembly?
• A: Yes, assemble the furniture on a soft surface to prevent scratching or damaging the parts. Also, avoid overtightening the screws.

PRE-ASSEMBLY

• Two people are recommended to assemble this furniture.
• Carefully remove all parts and hardware from the carton, along with any protective packaging.
• Locate and set aside the hardware kit before discarding the packaging.
• Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
• Assemble the furniture on a soft surface, and take extra care not to scratch or damage parts during the assembly.

PRECAUTIONS — READ ALL BEFORE BEGINNING ASSEMBLY

• Do not place items on the shelf which exceed the maximum weight limits of:
• Top shelf: 30 lbs. (13.6 kg)
• Usage with loads heavier than the maximum weights specified may result in instability, causing tip-over and resulting in death or serious injury.
• When in use, this furniture must be placed on a flat, solid and level surface.
• DO NOT CLIMB, STEP OR SIT ON THE TOP SHELF.
• Remove ALL items from the furniture before attempting to move the furniture.
• Do not use a drill or power tools to assemble this furniture, as it may weaken or damage parts.

PARTS

NOTE: This illustration is for parts identification/orientation purposes only. For assembly.

• THIS FURNITURE WILL BE ASSEMBLED IN AN UPSIDE-DOWN POSITION.
• MAKE SURE THE ASSEMBLY IS DONE ON A LEVEL AND SOFT SURFACE (SUCH AS BLANKETS) TO PREVENT DAMAGING THE PARTS DURING ASSEMBLY.

Two people are recommended to assemble this furniture.

Installation Instructions

• Shown in the upside-down position.

• Shown in an upside-down position.

NOTE: DO NOT OVERTIGHTEN SCREWS.

• Shown in an upside-down position.

• Shown in an upside-down position.

• IMPORTANT: TO ENSURE THE BASE ASSEMBLY IS CORRECT,
• MAKE SURE LATCHES IN PART C ARE FULLY INSERTED INTO LATCHES IN PART B.

An assistant is recommended to HOLD the shelf in place to assemble.

• Shown in the upside-down position.

• Shown in an upside-down position.

• With the help of an assistant, turn side table upright.

NOTE: Use the levelling feet to make sure furniture is levelled on the floor before using.

CARE INSTRUCTIONS

• Wipe clean with a soft, dry cloth or static duster.
• Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the table’s finish.
• Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>