CASIO 5607 Baby Watch User Guide

: June 17, 2024
: Casio

Table of Contents

CASIO 5607 Baby Watch
Configuring Home City, Time and Date Settings
Mode Selection and Operations
Timekeeping Mode
World Time Mode
Stopwatch Mode
Adjusting the Analog Hand Setting
Specifications
City Code Table
Specifications
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CASIO 5607 Baby Watch

User’s Guide 5607

Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under “Operating Precautions” and “User Maintenance”.
Be sure to keep all user documentation handy for future reference.

Important!

This manual provides a brief overview of your watch.

For a full Operation Guide and Q&A information about this product, go to the website below.
https://world.casio.com/manual/wat

Configuring Home City, Time and Date Settings

Configure Home City and summer time settings first. After that, configure time and date settings.

1. In the Timekeeping Mode, hold down A for at least two seconds until the seconds start to flash. This is the setting mode.

2. Press C to move the flashing in the sequence shown below to select settings.

Watch

3. Use B and D to change the selected setting

Use B and D

4. Press (A) to exit the setting mode.

Mode Selection and Operations

Press C to cycle between modes.

Press C

Timekeeping Mode

D: Changes display contents.
Month, day, Day of the Week Hour, minute, Second

World Time Mode

Holding down (A) for at least two seconds toggle summer time (DST) on and off.

Stopwatch Mode

Light
B: Illuminates face.
Operation Tone
Hold down C for at least three seconds to toggle the operation tone between enabled and disabled.

Adjusting the Analog Hand Setting

Use the operations below to adjust the analog hands so their setting matches the digital time in the Timekeeping Mode.

D (three seconds in Timekeeping Mode): Enters analog hand setting mode.
D: Advances minute hand 20 seconds.
B: (while holding down D): Locks high-speed hand movement.
A: Exits analog hand setting mode.

Specifications

Accuracy at normal temperature: ±30 seconds a month
Digital Timekeeping: Hour, minutes, seconds, p.m. (PM), month, day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 48 city codes);
Standard Time/Daylight Saving Time (summer time)
Analog Timekeeping: Hour, minutes (hand moves every 20 seconds)
World Time: 48 cities (29 time zones) and Coordinated Universal Time (UTC)
Other: Daylight Saving Time/Standard Time
Alarms: 5 daily alarms (with one snooze alarm); Hourly time signal

Stopwatch:
Measuring unit: 1/100 second
Measuring capacity: 23:59’59.99″
Measuring modes: Elapsed time, split time, two finishes

Countdown Timer:
Measuring unit: 1 second
Countdown range: 24 hours
Countdown start time setting range: 1 minute to 24 hours (1-minute increments)
Illumination: LED (light-emitting diode)
Battery: Two silver oxide batteries (Type: SR726W)

Approximately 2 years on type SR726W (assuming alarm operation 20 seconds per day and one illumination operation 1.5 seconds per day)

Frequent use of illumination runs down the battery.

Specifications are subject to change without notice.

City Code Table

This table shows the city codes of this watch (As of July 2018).
The rules governing global times (UTC offset and GMT differential) and summer time are determined by each individual country

Specifications

Model: MA1901-EA
User’s Guide: 5607
Language: English
Illumination: LED (light-emitting diode)
Battery: Two silver oxide batteries (Type: SR726W)
Battery Life: Approximately 2 years on type SR726W (assuming alarm operation 20 seconds per day and one illumination operation 1.5 seconds per day)

To do this:	Do this:
Reset the seconds to 00	Press D.

Toggle between Daylight Saving Time (ON) and Standard Time
(OFF)| Press D.
Change the city code| Use D (East) and B (West).
Change the hour or minute| Press D.
Toggle between 12-hour (12H) and 24-hour (24H) timekeeping| Press D.
Change the year, month, or day| Use B and D.

FAQ

How long does the battery last?

The watch uses two silver oxide batteries (Type: SR726W) and has an approximate battery life of 2 years assuming alarm operation for 20 seconds per day and one illumination operation for 1.5 seconds per day.

Where can I find the full Operation Guide and Q&A information about this

product?

You can find the full Operation Guide and Q&A information
about this product on the official CASIO website: https://world.casio.com/manual/wat/

How do I toggle the operation tone on and off?

To toggle the operation tone on and off, hold down C for at least three seconds.

What is the countdown range of the Countdown Timer Mode?

The countdown range of the Countdown Timer Mode is 24 hours, with a countdown start time setting range of 1 minute to 24 hours in 1-minute increments.