assida C100 Coin Counter/Sorter User Manual
- June 17, 2024
- assida
Table of Contents
assida C100 Coin Counter/Sorter
Specifications
- Model: CASSIDA C100
- Type : Electronic Coin Counter/Sorter
- Weight : 12.5 lbs (5.7 kg)
- Dimensions: 11.4″ x 10.8″ x 10.2″ (29 x 27.4 x 26 cm)
- Power Source: AC 120V, 60Hz
- Counting Speed: 2,000 coins per minute
- Hopper Capacity: Up to 1,500 coins
- Countable Coin Diameter: 0.79″ – 1.29″ (20 – 33 mm)
- Countable Coin Thickness: 0.04″ – 0.12″ (1 – 3 mm)
This manual contains important information on safety measures and operational features, please read it carefully before operating your coin counter and keep it for future reference.
INTRODUCTION
- Thank you for choosing the Cassida C100 coin sorter. We hope you enjoy using it.
- The Cassida C100 coin counter/sorter is a multifunctional coin processing machine that incorporates all of the features of a professional coin counter/sorter at a very affordable price. Its large hopper is capable of holding 1600 coins (dimes) and the coin trays can each accumulate up to 900 coins (dimes) at a time. Displaying the subtotal for each denomination and the total value makes the Cassida C100 an easy all-in-one tool for any coin-handling needs.
- The Cassida C100’s lightweight, compact, and stylish design will easily fit into your business environment.
Box contents
- Cassida C100 coin counter
- User manual
- Cleaning cloth
Front and rear view
Front view:
-
Control panel
-
Coin hopper
-
Coin trays
- holds coins that need to be counted.
- each tray holds a specific denomination of counted and sorted coins.
Rearview:
-
Plastic housing
-
Rear access panel
-
Power switch
- when removed provides access to the counting mechanism for cleaning and repairing purposes.
- provides easy access to the inside mechanism to remove foreign objects and jammed coins. -turns the power on or off.
Control panel
- “START/STOP”: Starts or stops the operation of the machine.
- “ C”: Clears the display and resets the count
- “ SET”: Shows batch quantities set for each denomination.
- “BATCH”: Selects preset batch quantities (0,10,20,25,50,80,100,120,150,200,300,400,500).
- “_”: Decreases batch quantity by a value of 1
- “+”: Increases batch quantity by a value of 1.
- “REPORT”: Shows the number of coins counted for each denomination.
Specifications
Important safety notes
When using this unit, basic safety precautions should always be taken,
including the following:
- Do not use this unit in areas where it may be exposed to water or any other liquids.
- Only use the power cord supplied with the unit. Plug the power cord into a properly grounded wall outlet. Do not remove the ground pin from the power cord. Failure to properly ground the unit can result in severe injury or fire.
- Make sure the unit is installed on a flat surface. Do not operate the machine in areas with high temperature, humidity, or smoke: it may prevent it from working correctly.
- Do not start the unit when the rear access panel is open.
- When not using this unit for an extended period, remove the power plug from the wall outlet.
- Unplug this unit from the wall outlet before cleaning. Use specified cleaning products such as a Cassida air duster, a CleanPro cleaning swab, or a soft cloth.
- To avoid the risk of electrical shock, do not disassemble this machine. Disassembling it will expose you to dangerous voltages and other risks. Incorrect re-assembly can cause electrical shock when the appliance is subsequently used. Take it to a qualified technician when service or repair is required.
OPERATING THE MACHINE
Powering up
Important: Before turning on the Cassida C-100, make certain no coins are
present in the coin hopper. This will cause an “EA” error when the C-100 self-
test is performed. To clear the “EA” error, press the START/STOP button, then
empty any coins present in the coin trays. Show him when Shih chit the machine
will then conduct an elf check. The main display will
Counting
The C100 always operates in a batching mode. To enable simple counting, all batch quantities need to be set to zero. To set batch quantities to zero press the button “-” for approximately seven seconds until the letter “C” is displayed on the left side of the LED display.
- Before loading the hopper, make sure no uncounted coins are remaining in it from the previous count.
- To count the coins place them into the hopper and press the “START/STOP” button.
- The C100 will start counting and will automatically sort all the coins by placing them into the coin trays.
- The machine will automatically stop when all coins in the hopper are counted or if the batch quantity for any coin denomination is reached.
- To stop the machine manually press the “START/STOP” button.
- To resume counting press the “START/STOP” button.
- When a coin tray becomes full, please stop the machine and empty the tray to ensure correct machine operation. Stopping the machine will not alter or reset the count. You can continue counting by pressing the “START/STOP” button.
- As it counts, the Cassida C100 will automatically display the total value of counted coins on the screen.
- To view the number of coins counted for each denomination press the “REPORT” button.
The denomination will appear on the left and the value of counted coins on the right part of the screen.
- To reset the coin count before starting a new batch, press the “C” button.
NOTE: The US model C100 has two dispense openings above some coin trays. Coins are only dispensed through one opening for each coin denomination.
Adding: The C100 operates in ADD mode by default. In ADD mode, the coin count is added to the count from previous batches. To start a new count, press the “C” button. This will reset the coin count to zero.
Setting batch quantity
You may batch the desired quantity of each coin denomination. Each
denomination can be assigned a batch quantity.
-
Press “SET” until the desired denomination appears on the left part of the screen.
-
To assign a batch quantity for this denomination press the “BAT” button until a desired batch appears on the display (0,10, 20, 25, 50, 80, 100, 120, 150, 200, 300, 400, 500).
Fine adjustments to batch quantity can be made by pressing “-” or”+” button. -
To set batch quantities for other denominations repeat steps 1 and 2.
NOTE: When operating in batch mode, the C100 will keep a running total counted value for each denomination coin. For example, after four batches of 50 pennies have been dispensed, the C100 will stop and display. 1c 2.00
To resume counting, press “Start/Stop” button.
- Pressing the “C” button will reset the count and the machine will start batching from zero.
- The set batch quantities are stored in the C100’s internal memory, and will not be reset when the machine is turned off.
Clearing batch quantities
You may clear all batch quantities by pressing and holding the “-” button for
approximately seven seconds. The C100 will then beep and display a “C” message
on the control panel, indicating all batch quantities have been reset to zero.
MAINTENANCE AND TROUBLESHOOTING
Maintenance
Attention: You should always turn the unit off and disconnect the power
cord before cleaning the machine
To get the best results out of your machine the following maintenance is
recommended regularly:
- Clean all external parts of the machine with a can of compressed air or a soft cloth. Do not use solvents, as they may damage the C100.
- Clean all the sensors using the procedure described below.
- Remove the three housing screws and carefully lift up the housing
- Clean all sensors and other dusty parts using a Cassida CleanPRo air duster followed by a Cassida CleanPro swab.
B. Clean all sensors and other dusty parts using compressed air or a soft bristle brush
Additional maintenance tips:
- Make sure there are no foreign objects in the coins you are going to count.
- When not using your machine for an extended period, cover it with a cloth or plastic sheeting to prevent dust from settling inside
Troubleshooting
Error message display
NOTE: The US model C 100 has two dispense openings above some coin trays.
Coins are only dispensed through one opening for each coin denomination.
Cassida C100 coin counter/sorter is warranted for one year from the date of
purchase. In most cases, the malfunction of the machine can be resolved by
cleaning the unit. Please refer to section 3.1 “Maintenance” for guidelines.
She bingo does not cover shipping costs from Cassida Technical Service Center
Warranty registration:
- You may register your product online by visiting: http://cassidausa.com/register.html
- Registering your product will allow you to receive future product update information.
Non-warranty service
Cassida can perform maintenance and cleaning for an extra fee. For a non-
warranty repair/maintenance quotation, contact Cassida Technical Support.
- Product model: Located on the bottom of your coin sorter
- Peridunumber: Located on the bottom of your coin sorter
- Nature of problem : What happens and when does it happen? Did the machine display an error message?
- Steps were already taken to resolve the problem and the results
Contact information
Technical support
- email: [email protected]
- phone: 1-888-800-0303
- http://cassidausa.com
When contacting Cassida Technical Support, please have the following information available.
- Serial number – Located on the bottom of your Cassida C 100 unit.
- Nature of the problem – What happens, and when did it happen? Did the machine display an error message?
- Steps have already been taken to resolve the problem and the results.
FAQ
Frequently Asked Questions
- Q: Can the CASSIDA C100 handle foreign coins?
- A: The CASSIDA C100 is designed to handle US coins only, and it may not accurately count or sort foreign coins.
- Q: What happens if a coin gets stuck during the sorting process?
- A: If a coin gets stuck, turn off the device, unplug it, and carefully remove the obstruction. Make sure to follow the user manual instructions for troubleshooting and contact customer support if the issue persists.
- Q: Is it possible to connect the CASSIDA C100 to a computer or printer?
- A: No, t`he CASSIDA C100 does not have computer or printer connectivity features. It is a standalone coin counter/sorter.
Designed by Cassida Corporation, USA
cassidausa.com
Made in China