Govee RGB+IC Waterproof LED Strip Light User Manual
- June 17, 2024
- Govee
Table of Contents
RGB+IC Waterproof LED Strip Light
Product Information
Specifications
- Product Name: RGB+IC Waterproof LED Strip Light
- Defect Rate: Approximately 0.5%
- After-sales Service: Free replacement for defective item within
18 months
Product Usage Instructions
How to Use Bluetooth Connection
-
For first-time use, you need to use WIFI to complete the above
operation settings. -
After completing the setting, if the WIFI signal disappears or
is turned off during use, please turn on the Bluetooth function of
the mobile phone. The mobile app will automatically connect to the
WIFI controller, and you will be able to continue operating all
functions in the app normally.
Use your phone to scan the QR code below or search Tuya Smart in
application marker to download and install the App.
Register: Register your account following the
tips below before using it for the first time. If you already have
an account, please enter the password to login directly.
Login: Input the correct account number and
password to login.
Forgot your password: You can enter the login
page to retrieve your password.
In the main application page, click on the top right corner “+”
to go to the next window page and then choose “Lighting,” as shown
below. In normal mode, please confirm that the device’s red light
is quickly blinking and then proceed to the next step.
Note: If the light is not flashing, please power on
your device and then power off (repeat 3 times) until the red light
quickly blinks. Alternatively, you can long-press the ON button of
the infrared remote control (5-10 seconds) until the red light
quickly blinks.
If adding the device in Normal mode fails multiple times, please
go to “Add Device-AP mode.”
In the main application page, click on the top right corner “+”
to go to the next window page and then choose “Lighting,” as shown
below.
In normal mode, click on the top right corner “AP Mode” to go to
the AP Mode window page.
In AP Mode, please confirm that the device’s red light is slowly
blinking and then proceed to the next step.
Note: If the light is quickly blinking, simply press
the controller for 5-10 seconds again, and the red light will
slowly blink.
If the light neither slowly blinks nor quickly blinks, follow
these steps:
-
First, press the mode key of the controller for 5-10 seconds to
keep the red light quickly blinking. -
Second, release the button and then press the controller for
5-10 seconds again. The red light will slowly blink.
Key Points to Note
FCC Statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a
minimum distance of 20cm between the radiator and your body.
FAQ
Q: What should I do if I receive a defective light set?
A: If you receive a defective light set, please feel free to
contact us for replacement or online support. We offer free
replacement for defective items within 18 months.
Q: How do I contact after-sales support?
A: You can contact us easily through the following methods:
- Email: Prowemst@outlook.com
- WhatsApp: +8615899941256
RGB+IC waterproof LED strip light
User ManualRGB-IC
Af t er – sales Ser vic e
Ultra long LED strip has many LED units and there is a general defect rate, about 0.5%. If you receive a defective light set or need assistance please feel free to contact us for replacement/online support.
Free replacement for defective item within 18 months
Anger
If any quality issue causes or please
contact us first
Disappointment
Free replacement within 18 months since purchase date!!!
Any issues,please contact us and we will
We promise:Any problem, please contact us first , We are willing to bear all
losses to provide you
with first class after-sales services.
Contact me easily:
quickly follow up until your problem solved.
Scan the code to leave a message now
Email:Prowemst@outlook.com
WhatsApp+8615899941256
WhatsApp
or After-sales support:
Prowemst@outlook.com
How t o use Bluet oot h connect ion
1. For f irst t ime use, you need t o use WIFI t o complet e t he above
operat ion set t ings.
2 . Af t er complet ing t he set t ing, if t he WIFI signal disappears or is t
urned of f during use, please t urn on t he Bluet oot h f unct ion of t he
mobile phone. The mobile APP w ill aut omat ically connect t o t he WIFI cont
roller and you w ill be able t o cont inue t o operat e all f unct ions in t
he APP normally.
Use your phone to scan the QR code below or search” Tuya Smart ” in
application marker to Download and install the App
Register:Register your account to the following tips before using at the first
time.If you have an account,please enter the password to login directly.
Login:Input the correct account number and password to login. Forgert your
password:You can enter the login page to retrieve your password.
In the main application page,click on the top right corner “+” to next window
page and then choose Lighting,as shown below. In normal mode,please confirm
that the device red light is quickly blink and then into the next step.
Note: If the light is not flash, please power on your device, and then power
off (repeat 3 times),until the red light will quickly blink , also you can
long press the “ON” button of the infrared remote control(5-10seconds) ,until
the red light will quickly blink.
If add the device in Normal mode fails many times,please go to Add Device-AP
mode
In the main application page,click on the top right corner “+” to next window
page and then choose Lighting,as shown below.
In normal mode, click on the top right corner “AP Mode” to AP Mode window
page.
In AP Mode,please confirm that the device red light is slowly blink and then
into the next step.
Note: If the light in quickly blink,just press the controller with 5-10
seconds again,and the red light will slowly blink.
If the light neither slowly blink nor quickly blink.First press the “mode” key
of the controller with 5-10 seconds to keep the red light in the quickly blink
,Second release the button and then press the controller with 5-10 seconds
again,the red light will slowly blink.
Key point s t o put up
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: — Reorient or relocate the receiving antenna. —
Increase the separation between the equipment and receiver. — Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. — Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. Cet équipement est
conforme aux limites d’exposition aux rayonnements IC définies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec
une distance minimale de 20 cm entre le radiateur et votre corps. – English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
– French: Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire
de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>