COMICA CVM-VP3 Supercardioid Condenser Shotgun User Manual
- June 17, 2024
- COMICA
Table of Contents
COMICA CVM-VP3 Super cardioid Condenser Shotgun User Manual
Foreword
Thanks for purchasing COMICA CVM-VP3 condenser shotgun microphone.
Comical CVM-VP3 Super-cardioid condenser shotgun video microphone, is specially designed for video shooting, meeting, and interview for camera, camcorder ; Meanwhile the Microphone is designed with low Noise Circuit, two step high-pass filter, -10dB sensitivity adjustment, powered by AA battery, low self-noise , full metal material construction and super shielding, which provides your video a broadcast sound quality
Please read this manual carefully before using. This product has been precisely calibrated at the factory, do not assemble and disassemble parts by yourself
Main Features
-
Low Noise Circuit
-
Two Step High-pass Filter
-
10dB Adjustable Sensitivity
-
1.5V AA Battery
-
Full Metal Material Construction and Super Shielding
-
Broadcast Sound Quality
Notice
When putting the batteries in, please notice the “positive and negative poles”
to avoid reversed assembling to cause product damage.
Please do not put the device beside the heat or interference source.
Please avoid falling, collision or pounding during usage.
Don’t expose the device in rain or moist environment .
After usage, please turn it off for storage.
Package Content
Standard Parts
-
Microphone Interference Tube
-
LR-3.5mm Output Cable
-
LR-XLR Output Cable
-
Camera Bracket
-
Boom Bracket
-
Windscreen
-
Black Portable Bag
-
User Manual
-
Warranty Card
Optional parts
-
Wind Muff
-
Shock Mount
Components Introduction
Microphone
- Audio Receiver End
- Power/-10dB Sensitivity Button
- Treble Boost Button
- Low-cut Filter Button
- Power Indicator Light
- Audio Output Jack
- Battery Holder
Installation
Installation of AA Battery
Rotate the tube , open the battery holder
Insert the battery
Rotate the tube, close the battery holder
Install Mic onto Camera/Camcorder
Connect the Mic and Camera/Camcorder Via Camera Bracket
Connect the mic onto Camera Bracket
Connect the mic onto camera/camcorder via Camera Baseplate , fasten the
Tightness Adjusting Screw
Connect the 3.5mm output cable / XLR output cable to the Camera/ Camcorder
Connect the Mic and Camcorder Via Boom
Connect the Mic and Boom Bracket
Connect the Boom Bracket and Boom
Connect the 3.5mm / XLR output cable to the Camcorder
Operation
Instructions for Buttons
Long Press the Power Button to turn on or off power.
Short press the Power Button to turn on or off the -10dB adjustable
sensitivity function.
Short press the Treble Boost Button to open or off the treble booster
function.
Short press the Low-cut Filter Button to open or off the low-cut function.
Treble Boost function can be used when recording some deep voice, it can boost the treble , then the recorded voice would make a balance between treble and bass. The low-cut function can effectively reduce the influence of noise when recording, but sometimes it may lose some sound details, so it needs to be used according to demands.
Instructions for Buttons’ Indicator Light
Blue light : the function represented by the button is valid.
Instructions for Power Indicator Light
Blue light : the battery have sufficient power for normal working.
Green light : device detected +48V phantom power.
Red light : the battery is in low power and needs to be replaced.
| Polar Pattern | Super Cardioid |
|---|---|
| Frequency Range | 20Hz-20KHz |
| Low-cut | 100Hz |
| Sensitivity | -38dB ±3dB |
| Output Impedance | 200Ω |
| S/N | >65dB |
| Maximum SPL | >105dB |
| Output Form | 3 Pin XLR Balanced Output |
| Power | AA Battery (Don’t Support Phantom Power Supply Alone) |
| Size | Φ22 mm x L 280 mm |
| Net Weight | 172g |
