Current Orbit IC LED Light User Guide
- June 17, 2024
- current
Table of Contents
Current Orbit IC LED Light
Product Information
Specifications
- Compatible with LOOP Accessories
- Adjustable Tank Mount Arm
- DC Wave Pumps
- 5 Main Light Controls
- Main Power key to turn the LOOP controller and LED lights ON/OFF
- LOCK/UNLOCK key to lock or unlock settings
- WEATHER key to turn weather program on or off
- Daylight, Moonlight, and Sunrise/Sunset keys to change color spectrum
- Supports DC Flow Pumps
- LOOP Hinge Mount Kit compatible
Product Usage Instructions
Installation
- Install LED Light:
- Slide and adjust docking mounts.
- Install LED Light on top of the aquarium.
- Mount HUB and Controller:
- Choose a clean, dry location for HUBs.
- Screw mounting clips into the stand location.
- Slide HUBs and LOOP controller into mounting clips.
- Decide if you want the LOOP controller to be located outside your cabinet to receive signals or inside the cabinet and use the remote IR sensor.
Control
-
Main Power
Press the Main Power key to turn the LOOP controller and LED lights ON/OFF. -
Lock/Unlock
Press the LOCK key to lock settings. The LOCK icon will appear on the controller screen. To unlock settings, press the LOCK key for 5 seconds.
Note: The remote will only work when unlocked. -
Weather Program
To turn the weather program on or off, press and hold either WEATHER% key for 5 seconds. To change the weather forecast, press the WEATHER% key, choose the weather program, then press the Hour+ or Minute- keys to change the forecast from 10% to 50%. Press Enter/Resume to save. -
Set On/Off Time
-
To set the ON or OFF time, press either the ON or OFF TIME key and use the HOUR+ and MINUTE- keys to adjust the time. Press Enter/Resume to save.
-
Change Color
To change the color spectrum, press either the Daylight, Moonlight, or Sunrise/Sunset key. Use the RGBW keys to adjust the light to the desired color spectrum. Press and hold the same key (Daylight, Moonlight, or Sunrise/Sunset) for 5 seconds to save the color spectrum.
FAQ
-
Where can I find further instructions?
Please refer to the instruction manual included or visit our website at www .current-usa.com/videos. -
What accessories are compatible with the Orbit IC?
The Orbit IC is compatible with Adjustable Tank Mount Arm, DC Wave Pumps, and LOOP Hinge Mount Kit. -
How do I register this product?
Please register this product at www.current-usa.com.
QUICK START GUIDE
What’s Next
Thank you for getting In The LOOP!
For step-by-step video instructions, visit our website at www.current-
usa.com/videos
WHAT’S INCLUDED
- Orbit IC LED Light
- LOOP Light Controller w/Mounting Clip Light Manifold (HUB) w/Mounting Clip 12V DC Power Supply
- Wireless Remote Control
- Remote IR Sensor (optional)
- Cable Wraps
BEFORE INSTALLATION
- Follow ALL safety instructions and warnings included with this product.
- Find a clean, dry location to mount the LOOP controller, light & pump HUBs either under or outside your aquarium cabinet.
This product can receive command signals from the wireless remote in two locations:
-
LOOP controller (sensor located on display front)
-
Remote IR sensor
-
Decide if you want the LOOP controller to be located outside your cabinet to receive signals or inside the cabinet and use the remote IR sensor.
-
Ensure all electrical components are plugged into a GFCI. Keep lights, HUBs and controller dry and free of moisture, water and salt creep
-
INSTALLATION
Install LED Light
- Slide and adjust docking mounts, install LED Light on top of aquarium
Mount HUB and Controller
- Choose a clean, dry location for HUBs
- Screw mounting clips into stand location
- Slide HUBs and LOOP controller into mounting clips
Before connecting cables, please review the following specifications and connections:
Connect
- Connect the following : LED light to light HUB
- (Light cable to HUB Connection L1 Light)
- LOOP controller to light HUB
- (LOOP micro USB cable to Light HUB Port#1)
- Optional IR sensor to light HUB
- (IR Sensor microUSB to Light HUB Port#2)
- 12V DC power to light HUB
- (12VDC cable to Light DC – L1 Connection)
- Power supply to GFCI outlet
Light Cycle Overview
Control
- Remove remote battery tab
- Press ON, ensure IR communication
- Program 24 hour clock (military time)
- Press SET CLOCK,
- Adjust time using HOUR+ and MINUTE- Press ENTER/RESUME to finish
Main Light Controls
-
POWER – Press the Main Power key to turn the LOOP controller and LED lights ON/OFF.
-
LOCK/UNLOC K – Press the LOCK key to lock LOCK settings, LOCK icon will appear on controller screen. To unlock settings, press LOCK for 5 seconds.
LOCK
NOTE : Remote will ONLY work when unlocked. -
WEATHER – Press either WEATHER% key and hold for 5 seconds to turn weather program on or off. To change weather forecast, press WEATHER% key , choose weather program then press HOUR MINUTE the Hour+ or Minute- to change forecast from 10% to 50%. Press Enter/Resume to save.
-
SET ON/OFF Time – Press either ON or OFF TIME key , use HOUR+ and MINUTE- to+ – adjust time. Press Enter/Resume to save.
-
Change COLOR – Press either Daylight, Moonlight or Sunrise/Sunset key . Use RGBW keys to adjust light to desired color spectrum. Press same key (Daylight, Moonlight or Sunrise/Sunset and hold for 5 seconds. Color spectrum is now saved.
For further instructions, please refer to the instruction manual included or
visit our website at www.current-usa.com/videos
Additional LOOP Accessories compatible with the Orbit IC:
WARNING!
Read the entire instruction manual to become familiar with the features of
this product before operating. Failure to operate product correctly could
result in damage to the product, property or personal injury.
- Please register this product at www.current-usa.com
- Copyright© 2016 Current-USA Inc. LOOP® is a registered trademark of Current-USA. Multiple patents pending.
References
- CURRENT USA: Innovative LED Lighting & Inspirational Aquariums | Current USA
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>