dyson DC11 Canister Vacuum User Guide
- June 17, 2024
- dyson
Table of Contents
dyson DC11 Canister Vacuum
Product Information
Specifications
- Model: 8284_DC11_OP_MAN_WEB
- Dimensions: Not specified
- Weight: Not specified
- Power: Not specified
Product Usage Instructions
Assembly
- Clip the floor tool into the wand.
- Press catch 1 to release and extend the wand cuffs until theyclick.
- Align the cuff and pins.
- Clip the hose into the machine.
- Click the tools onto the machine.
Storage
To store the product:
- Remove the floor tool from the wand.
- Compact the wand for easy storage.
FAQ (Frequently Asked Questions)
Q: What are the contents of the box?
A: The box includes the following items:
- A Telescopic wand
- B Machine
- C Brush tool
- D Crevice tool
- E Stair tool
- F Hose
- G All floors Turbo head
- H Optional Mini turbobrush
Q: How do I assemble the product?
A: To assemble the product, follow these steps:
- Clip the floor tool into the wand.
- Press catch 1 to release and extend the wand cuffs until they click.
- Align the cuff and pins.
- Clip the hose into the machine.
- Click the tools onto the machine.
Q: How do I store the product?
A: To store the product, follow these steps:
- Remove the floor tool from the wand.
- Compact the wand for easy storage.
User guide
Please read this carefully before use.
Box contents
A Telescopic wand, B Machine.
Assembly
Clip the floor tool into the wand. Press catch 1 to release and extend it until the wand cuffs click.
Clip the hose into the wand.
- Align cuff and pins. 2 Clip hose into machine.
Click the tools on to the machine.
Storage
Remove the floor tool from the wand. Compact the wand.
- Clip catch 1 between bins then press catch 2 to click into place.
- Loop the hose around the machine. Clip the hose into sides 3 and 4.
- Slide the floor tool into the parking yoke. Do not park wand in an upright position.
Vacuuming
Extend the cable up to the red tape. Press the on/off button to start or stop
the machine.
To adjust wand length, press catch 1 to slide handle.
The floor tools fit the end of the wand.
Empty the clear binsTM as soon as either one reaches the max mark (see page16).
- The tools clean upholstery, curtains and stairs.
- The tools fit the wand and hose.
- Hold down the cable rewind button to rewind the cable.
Tools
When you start the machine the Turbo head is already in carpet mode.
For hard floors, push or press the button in to turn the brushbar off. To return to carpet mode, pull the button out or turn the machine off.
Optional: Cleans hard floors gently.
Optional: Removes hair from confined spaces such as the car.
Reaches nooks and crannies.
For loose fabrics pull the trigger and hold to reduce suction.
Carrying
Do not press the cyclone release catch or wand release catch while carrying.
Ensure the cyclone pack and handle are firmly secured to the base. Ensure the hose has clicked into place on both sides. Do not shake the machine.
Emptying
Empty the clear binsTM as soon as either one reaches the max mark.
Press the red catch 1 to release the cyclone pack.
Press catch 2 to empty the bins. Close the bin base securely.
To re-assemble the bin bases, squeeze the hinges at the back.
Replace the cyclone pack firmly onto the machine.
Press catch 3 to remove the bins.
-
Brush the fine dust off the shroud.
-
Bins must be completely dry before refitting them.
Do not use detergents, polishes or freshening products. -
Emptying in a bag is recommended for allergy sufferers.
Wash the filter at least every 6 months
When vacuuming fine dust, the filter may require more frequent washing. Press
catch 1 to release the cyclone pack.
Lift the plastic filter case out of the machine.
Separate the foam layer and filter case. Shake the filter case over the dustbin.
Wash the filter and case in cold water only.
Wash the filter until the water runs clear and squeeze it to remove excess water.
Wash the case until the water runs clear and tap it dry to remove excess water.
Dry the filter and case for at least 12 hours.
The filter and case must be completely dry before refitting.
Blockages
Check A and B to ensure nothing is obstructing the ducts.
Check the accessory tools.
Check C where the hose joins the machine.
If any part of your machine becomes blocked, it may overheat and then cut out. Unplug the machine and leave it to cool down. Please note: clearing blockages is not covered by your machine’s guarantee.
All floors Turbo head
- Release the catches.
- Remove the soleplate.
- Remove the brushbar and clear away thread and hair.
- Check the duct for blockages. To re-assemble, align the arrows on each brushbar in the same direction, click and fasten the soleplate into place.
Press catch 1 to release the cyclone pack.
Check whether the filter and case need washing.
Check the air inlets.
Dyson Customer care service@dyson.co.uk
08705 275 104
Dyson Ltd, Tetbury Hill, Malmesbury, Wiltshire SN16 ORP
UK/IRL
If you have a query about your Dyson, call the Customer Helpline with your
serial number. The serial number can be found underneath your machine.
Important
Check that your electricity supply corresponds to that shown on the rating
plate.
The machine must only be used as rated.
If the supply cord of the appliance is damaged, disconnect from the socket
outlet immediately. The supply cord must be replaced only by Dyson Ltd. or
their appointed agent, to avoid a hazard.
Do not use the cleaner if the cord or plug are damaged or if the cleaner has
been damaged, dropped or has come into contact with water or any other liquid.
In these cases, contact the Helpline. This machine is not intended for use by
young children or infirm persons unless supervised. Ensure that young children
do not play with the machine.
European conformity information. A sample of this product has been tested and
found to be in conformity with the following European Directives: 73/23/EEC
Low voltage (safety) Directive, 93/68/EEC CE Marking Directive and 89/336/EEC
EMC Directive.
Product information
- Product Weight: 6,4kg
- Voltage: 230-240V
- Maximum power: 1400W
- Do not continue to use the cleaner if any part appears to be faulty, missing or damaged.
- Do not carry out any maintenance work other than that described in this manual and do not put anything into the openings or moving parts of the machine.
- Only use parts produced or recommended by Dyson: failure to do so could invalidate your guarantee.
- Do not use machine to pick up water or any other liquid.
- Do not immerse in water for cleaning.
Small details may vary from those shown.
This product is protected by the following Intellectual Property Rights:
Patent
GB 0221345.2, GB 0221346.0, GB 0222079.6, GB 0311734.8,WO 02/067742, WO
02/067753, WO 02/067752, WO 02/067746,WO 02/067757, WO 02/067755, WO
02/071913, EP 0 800 360,EP 0 636 338, EP 0 489 565, EP 1 246 561, EP 1 268 076
Designs: GB 3 012 568, GB 3 012 888.
Equivalent patents, registered designs and applications exist in other
countries.
- Do not pull on the cable.
- Do not use near naked flames.
- Do not leave near heat sources.
- Do not run over the cable.
- Do not pick up water or liquids.
- Do not pick up burning objects.
- Do not use above you on the stairs.
- Do not use above you on the stairs.