WAYLENS TW03 Dash Camera User Guide

: May 15, 2024
: WAYLENS

Table of Contents

WAYLENS TW03 Dash Camera
PRODUCT OUTLOOK
PRODUCT INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WAYLENS TW03 Dash Camera

PRODUCT OUTLOOK

$WAYLENS-TW03 -Dash-Camera-FIG- $1$$

$WAYLENS-TW03 -Dash-Camera-FIG- $2$$

Speaker
Function Buttons
Power/ Record Indicate
Mini USB
GPS Module
Mount Interface
Power Switch
SD Card Slot

PRODUCT INFORMATION

Model Name| TW03|
---|---|---
Product Size(LxWxH)| 572756mm|
Color type| Black|

Image sensor

| Sensor| Front:1/2.9″,2M
Lens| Front:H: 127°, V: 66.5°, D: 153° +/- 5% fixed

focus lens,6G+1IR; F2.4 +/- 5%

LED| LED Indicator| 1 Dual color LED (Red, Green),

Audio

Panel

| Display Option| 3″ LCD (16:9), IPS
---|---|---
Interface| RGB 565 interface
Flat Touch Panel| NA

GPS MODULE+Antenna

Exposure

| Control| Auto
EV Compensation| YES
ISO Equivalent| Auto

Capture

|

Still Image

| Scene Mode: NA
---|---|---
Resolution:2M
White Balance: Auto
Movie Recording| Size and Frame rate:1920 x 1080 @ 30fps
| Memory Card| External Memory: Micro SD, up to 128GB
File Format| Movie Clip: Normal mode: .ts (H.264+ADPCM codec)

WiFi

|

YES

| WiFi 802.11 a/b/g/n/ac 2.4G + 5G (Realtek RTL8821CU)6221E-UUC *1
Bluetooth*| Bluetooth 4.2| Build in WiFi module 1**

Interface

|

USB

| USB 2.0 High speed 10 pin mini-USB Connector
---|---|---

Power

| Battery type| Super capacitor, 7F (2.5V) x 2
Charger protect| YES

Adaptor type

| Front Channel:Car Cigar Power Charger (Input : 10V-30V/1A ; Output 5V/1.5A ; 10 pin mini-USB Connector

(8th Pin enable to have Adapter-in detection Low =5V/1.5A

High =5V/0.5A ) (TBD)

Power saving| User setting (LCD)
RTC| YES(3~7 days)
Buttons| Front channel| 6keys(5function keys+1 power on/off slide switch)

Enviroment

| Operating temperature| System: -20~+60°C
---|---|---
Operating humidity| 10% ~ 85% (non-condensing)
Storage temperature| -20~+80°
Storage Humidity| 10% ~ 85% (non-condensing)
UI language| UI language| English
Firmware| FW update| FW upgrade via SD card

FCC NOTE

FCC CAUTION
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not operate in conjunction with any other antenna or transmitter.