Whirlpool WRF532SMB Bottom Mount Refrigerator User Manual
- June 17, 2024
- Whirlpool
Table of Contents
Whirlpool WRF532SMB Bottom Mount Refrigerator
Specifications
- Product Model Numbers: WRF532SMB, WRF535SMB, WRF535SWB, WRF540CWB
- Electrical: A 115-volt, 60-Hz, AC-only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.
- Water: A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate the ice maker and water dispenser. If you have questions about your water pressure, call a licensed, qualified plumber.
Product Usage Instructions
Electrical Connection
Before performing any type of installation, cleaning, or removing a light
bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending
on the model) to OFF and then disconnect the refrigerator from the electrical
source. When you are finished, reconnect the refrigerator to the electrical
source and reset the control (Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired setting. See Using the Controls.
Water Supply
If you have a reverse osmosis system:
- The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa).
- If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).
Location Requirements
To ensure proper ventilation for your refrigerator:
- Allow for a 1/2″ (1.25 cm) space on each side and at the top.
- Allow for 1″ (2.54 cm) of space behind the refrigerator.
- If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.
- If you are installing your refrigerator next to a fixed wall, leave a minimum of 2.5″ (6.3 cm) on the hinge side (some models require more) to allow for the door to swing open.
FAQ
-
Q: What are the required electrical specifications?
A: The refrigerator requires a 115-volt, 60-Hz, AC-only, 15- or 20-amp fused, grounded electrical supply. It is recommended to have a separate circuit serving only the refrigerator. -
Q: What is the water pressure requirement for the ice maker and water dispenser?
A: The water supply should have a pressure between 30 and 120 psi (207 and 827 kPa). If you have questions about your water pressure, it is best to consult a licensed plumber. -
Q: How much space should be left around the refrigerator for proper ventilation?
A: Allow for a 1/2″ (1.25 cm) space on each side and at the top of the refrigerator. Leave 1″ (2.54 cm) of space behind the refrigerator. Additionally, if there is an ice maker, ensure there is extra space at the back for water line connections. -
Q: How much space should be left on the hinge side if installing the refrigerator next to a fixed wall?
A: Leave a minimum of 2.5″ (6.3 cm) on the hinge side (some models require more) to allow for the door to swing open.
Bottom Mount Refrigerator
PRODUCT MODEL NUMBERS
- WRF532SMB
- WRF535SMB
- WRF535SWB
- WRF540CWB
- Electrical: A 115-volt, 60-Hz, AC-only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.
- NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”
- Water: A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate the ice maker and water dispenser. If you have questions about your water pressure, call a licensed, qualified plumber.
- IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa).
- Reverse Osmosis Water Supply: If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).
PRODUCT DIMENSIONS
Model Number/ Size| Height – Overall “A”| Height – Top of Cabinet “B”| Depth – Doors Open 90°
“C”
| Depth – Drawer Open “D”| Depth – With Handles “E”| Depth – Without Handles “F”| Depth – Cabinet Only “G”| Width – Cabinet “H”| Width – Door Open 90°
“I”
---|---|---|---|---|---|---|---|---|---
WRF535SWB
25.2 cu. ft.
| 701⁄8″
(178.1 cm)
| 6813⁄16″
(174.8 cm)
| 481⁄16″
(122.1 cm)
| 531⁄8″
(135 cm)
| 357⁄16″
(90 cm)
| 3215⁄16″
(83.7 cm)
| 291⁄8″
(74 cm)
| 355⁄8″
(90.5 cm)
| 433⁄8″
(110.2 cm)
WRF535SMB
25.2 cu. ft.
| 701⁄8″
(178.1 cm)
| 6813⁄16″
(174.8 cm)
| 481⁄16″
(122.1 cm)
| 531⁄8″
(135 cm)
| 357⁄16″
(90 cm)
| 3215⁄16″
(83.7 cm)
| 291⁄8″
(74 cm)
| 355⁄8″
(90.5 cm)
| 433⁄8″
(110.2 cm)
WRF532SMB
22.1 cu. ft.
| 701⁄8″
(178.1 cm)
| 6813⁄16″
(174.8 cm)
| 423⁄8″ (107.6 cm)| 521⁄8″
(132.4 cm)
| 347⁄16″
(87.5 cm)
| 3115⁄16″ (81.1 cm)| 281⁄8″
(71.4 cm)
| 325⁄8″
(82.9 cm)
| 403⁄8″ (102.6 cm)
WRF540CWB
20 cu. ft.
| 701⁄8″
(178.1 cm)
| 6813⁄16″
(174.8 cm)
| 48″
(121.9 cm)
| 441⁄2″
(113.0 cm)
| 293⁄8″
(74.6 cm)
| 28″
(71.1 cm)
| 241⁄8″
(61.3 cm)
| 355⁄8″
(90.5 cm)
| 431⁄16″ (109.4 cm)
LOCATION REQUIREMENTS
- To ensure proper ventilation for your refrigerator, allow for a 1⁄2″ (1.25 cm) space on each side and at the top. Allow for 1″ (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.
- If you are installing your refrigerator next to a fixed wall, leave 21⁄2″ (6.3 cm) minimum on the hinge side (some models require more) to allow for the door to swing open.
- NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator.
Because Whirlpool Corporation policy includes a continuous commitment to
improve our products, we reserve the right to change materials and
specifications without notice.
Dimensions are for planning purposes only. For complete details, see
Installation Instructions packed with product. Specifications subject to
change without notice.
Ref. W10597594C 9/16
Documents / Resources
|
Whirlpool WRF532SMB Bottom Mount
Refrigerator
[pdf] User Manual
WRF532SMB Bottom Mount Refrigerator, WRF532SMB, Bottom Mount Refrigerator,
Mount Refrigerator, Refrigerator
---|---
|
Whirlpool WRF532SMB Bottom Mount
Refrigerator
[pdf] User Guide
WRF532SMB Bottom Mount Refrigerator, WRF532SMB, Bottom Mount Refrigerator,
Mount Refrigerator, Refrigerator
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>