Kmart 43351275 Blake Bedside Table Instruction Manual
- June 17, 2024
- Kmart
Table of Contents
Kmart 43351275 Blake Bedside Table
Assembly Instructions
CAR9 E INSTRUCTIONS : WIPE CLEAN WITH A SOFT DAMP CLOTH. NEVER USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS. KEEP AWAY FROM MOISTURE AND DIRECT SUNLIGHT. STORE IN A DRY PLACE. FOR INDOOR USE ONLY.
WARNING: DO NOT STAND, SIT OR LEAN ON THE UNIT. DO NOT USE THIS UNIT AS A
STEP LADDER. ENSURE THIS UNIT IS USED ONLY ON A FLAT SURFACE. DO NOT USE THIS
UNIT UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED. DO NOT PLACE HOT OBJECTS
SUCH AS COFFEE CUPS DIRECTLY ON THE SURFACE OF THIS FURNITURE ITEM. THIS ITEM
IS FOR STORAGE PURPOSES ONLY. CONTAINS SMALL PARTS. IT IS TO BE ASSEMBLED BY
AN ADULT. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
MAXIMUM SAFE LOAD: TOP: 10KG, SHELF:5KG.
Hardware
| A| φ6×30mm| 8pcs| | B| M6×35mm| 4pcs| | C| φ15×10mm| 4pcs
---|---|---|---|---|---|---|---|---|---|---|---
| D| M4×35mm| 4pcs| | E| | 2pcs| | F| M3.5×12mm| 16pcs
| G| M4| 1pc| | J| M6×28mm| 8pcs| | K| | 1pc
| L| | 4pcs| | M| | 1pcs| | N| M6×35mm| 4pcs
| O| M4×12mm| 2pcs| | P| | 4pcs| | | |
Parts List
| | | 
---|---|---|---
1| 1PC| 2| 1PC| 3| 1PC| 4| 1PC
| 
| 
|
5| 1PC| 6| 1PC| 7| 1PC| 8| 2PCS
9 2PCS|
Product Description
ATTENTION: DO NOT TIGHTEN THE SCREWS FULLY DURING ASSEMBLY. FULLY TIGHTEN SCREWS AFTER THE FINAL ASSEMBLY STEP.
Hinger Adjustment Tips
Noted: The door might be scraping, bumping, misaligned when first assembly.
Please follow the below tips:
Adjust the door up and down
- Loosen the two mounting screws on both hinges, but only slightly ….
- Gently close the cabinet door.
- With the door still closed, adjust the cabinet door to the desired height.
- Open the cabinet door again, being careful not to jostle the door out of position.
- Retighten the screws by hand.
Move the door in and out
If the door doesn’t meet the box at the top, adjust the top hinge toward the cabinet and/or adjust the bottom hinge away from the cabinet. If the door is gapped at the bottom, do the reverse.
Move the door right or left
You can adjust one or both hinges on each door, depending on how much correction it needs. If the door seems to be tilting down to the right, turn the side-to-side screw on the top hinge so the hinge pulls closer to the side of the cabinet box, moving the top of the door to the left.