ASUS Prime B760M-Plus Motherboards User Guide

: June 17, 2024
: Asus

Table of Contents

ASUS Prime B760M-Plus Motherboards
Product Information
Product Usage Instructions
INSTALLATION GUIDE
- Electrical safety
- Operation safety
General Notices
Warranty
Frequently Asked Questions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ASUS Prime B760M-Plus Motherboards

ASUS-Prime-B760M-Plus-Motherboards-product

Product Information

Specifications:

Model: Q22827
Edition: First Edition
Release Date: November 2023

Product Usage Instructions

Prepare the components
Before starting the installation process, make sure you have the following components ready:

CPU
Memory
M.2 SSD
Chassis
CPU Cooler
SATA device
Power supply unit
Graphics card

Note : The components listed above are recommendations. Please prepare components according to your needs.

Install key components
Now, let’s install the key components:

Thermal paste: Apply thermal paste to the CPU before installation.
M.2 SSD: Rotate the M.2 Q-latch, secure the screw properly, or insert the pin of the M.2 Anchor into the hole.
CPU Cooler: Connect the CPU_FAN / CPU_OPT or CPU_FAN / CPU_OPT (connect to the radiator) AIO_PUMP / W_PUMP to the appropriate connectors.
Motherboard: Install the motherboard into the chassis. For non-pre-mounted I/O shield models, follow the manual for more information.
Chassis: Connect cables from the chassis to the motherboard, including the chassis fan and ARGB/RGB headers.
Power supply unit (PSU): Secure the PSU to the chassis using screws and ensure proper airflow.

Connect cables from the PSU
Connect the necessary cables from the power supply unit (PSU) to the motherboard and other components.

Connect everything to the motherboard
Connect all the power cables, including PLED, PWRSW, HDD_LED, RESET, and any other required cables, from the PSU to the motherboard.

Install the graphics card
Follow the manual for more information on installing the graphics card. Note that a power connection may be required for selected models.

Connect to the Internet via Ethernet/Wi-Fi antenna
To connect to the Internet, use either an Ethernet cable or a Wi-Fi antenna, depending on your network setup.

The items labeled below correspond to the installation steps, for steps and more information on the steps, please refer to the rest of the guide.

INSTALLATION GUIDE

$ASUS-Prime-B760M-Plus-Motherboards-fig- $1$$

Prepare the components $ASUS-Prime-B760M-Plus-Motherboards-fig- $2$$
NOTE : The components listed above are recommendations, please prepare components according to your needs.
Install key components
Install the CPU $ASUS-Prime-B760M-Plus-Motherboards-fig- $3$$ NOTE : Do not remove the PnP cap before the CPU is properly installed. Please refer to the manual(s) for more information:
Install the Memory $ASUS-Prime-B760M-Plus-Motherboards-fig- $4$$
NOTE : Please refer to the manual(s) for more information:
Install the M.2 SSD $ASUS-Prime-B760M-Plus-Motherboards-fig- $5$$
NOTE : Please refer to the manual(s) for more information:’
Install the cooling system
Air Cooler $ASUS-Prime-B760M-Plus-Motherboards-fig- $6$$
AIO Cooler $ASUS-Prime-B760M-Plus-Motherboards-fig- $7$$
NOTE : Please refer to these manual(s) for more information:
Install the motherboard into the chassis
A : For non-pre-mounted I/O shield models only. $ASUS-Prime-B760M-Plus- Motherboards-fig- $8$$
NOTE : Please refer to the manual(s) for more information:
Connect to chassis fan and ARGB/RGB headers $ASUS-Prime-B760M-Plus-Motherboards-fig- $9$$
NOTE : Please refer to the manual(s) for more information:
Install and connect the power supply unit (PSU) $ASUS-Prime-B760M-Plus-Motherboards-fig- $10$$
NOTE : Please refer to the manual(s) for more information:
Connect the power cables to the motherboard $ASUS-Prime-B760M-Plus- Motherboards-fig- $11$$
NOTE : Please refer to the manual(s) for more information:
Connect everything to the motherboard
Front panel header $ASUS-Prime-B760M-Plus-Motherboards-fig- $12$$
Front Audio header
USB connector/header
NOTE: Please refer to the manual(s) for more information:
Connect cables from PSU
SATA $ASUS-Prime-B760M-Plus-Motherboards-fig- $15$$ NOTE : Please refer to the manual(s) for more information:
Install the graphics card $ASUS-Prime-B760M-Plus-Motherboards-fig- $16$$
NOTE : Please note that power connection is required for selected models. Please refer to the manual(s) for more information:
Connect to the Internet via Ethernet/Wi-Fi antenna $ASUS-Prime-B760M-Plus-Motherboards-fig- $17$$
NOTE: Please refer to the manual(s) for more information:
Connect peripherals (monitor, keyboard, mouse, etc.) $ASUS-Prime-B760M-Plus-Motherboards-fig- $18$$
Turn on the PSU and your PC $ASUS-Prime-B760M-Plus-Motherboards-fig- $19$$
NOTE : Please check the Q-LEDs or Q-LED core on selected motherboards when powering on your PC for system status. If an error occurs, check if your CPU Fan header is properly connected; you can also scan the code or refer to the manual(s) for more information:
Install the operating system and drivers $ASUS-Prime-B760M-Plus-Motherboards-fig- $20$$
Driver and Utility installation

Electrical safety

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety

Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.
Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service technician or your retailer.
Your motherboard should only be used in environments with ambient temperatures between 10°C and 35°C.

Button/Coin Batteries Safety Information

WARNING
KEEP OUT OF REACH OF CHILDREN Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.

General Notices

FCC Compliance Information

Responsible Party : Asus Computer International
Address : 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No : (510)739-3777 / (510)608-4555

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

HDMI Trademark Notice
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Safety Precautions
Accessories that came with this product have been designed and verified for the use in connection with this product. Never use accessories for other products to prevent the risk of electric shock or fire.

VCCI : Japan Compliance Statement

Class B ITE
Japan JATE

Declaration of compliance for product environmental regulation
ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/Compliance.htm for information disclosure based on regulation requirements ASUS is complied with:

EU REACH and Article 33
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

EU RoHS
This product complies with the EU RoHS Directive. For more details, see http://csr.asus.com/english/article.aspx?id=35

India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.

Vietnam RoHS
ASUS products sold in Vietnam, on or after September 23, 2011,meet the requirements of the Vietnam Circular 30/2011/TT-BCT.

RoHS

ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.

Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

France sorting and recycling information

Compliance Statement of Innovation, Science and Economic Development

Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-003(B)/NMB-003(B)
KC : Korea Warning Statement

Simplified UKCA Declaration of Conformity
ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related UKCA Directives. Full text of UKCA declaration of conformity is available at: www.asus.com/support

Simplified EU Declaration of Conformity

ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support

Warranty

ASUS Guarantee Information

ASUS offers a voluntary manufacturer’s Commercial Guarantee.
ASUS reserves the right to interpret the provisions of the ASUS Commercial Guarantee.
This ASUS Commercial Guarantee is provided independently and in addition to the statutory Legal Guarantee and in no way affects or limits the rights under the Legal Guarantee.

For all the guarantee information, please visit https://www.asus.com/support.

https://www.asus.com/vn/support

ASUS contact information

ASUSTeK COMPUTER INC. Address : 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112
ASUS COMPUTER INTERNATIONAL (America) Address : 48720 Kato Rd., Fremont, CA 94538, USA
ASUS COMPUTER GmbH (Germany and Austria) Address : Harkortstrasse 21-23, 40880 Ratingen, Germany
ASUSTeK (UK) LIMITED Address : 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England, United Kingdom

Service and Support
Visit our multi-language website at https://www.asus.com/support.

Product Register
Log in and register your device for better product support.

$ASUS-Prime-B760M-Plus-Motherboards-fig- $20$$