Tilta TA-RRA-1420-1-4 Right Angle Rosette Adapter to 14 20 Locating Pins Instruction Manual
- June 17, 2024
- TILTA
Table of Contents
RIGHT ANGLE ROSETTE ADAPTER
TO 1/4″-20 WITH LOCATING PINS
- M6 Screw for Securing the Rosette
- 1/4″-20 Screw with Locating Pins
ASSEMBLING THE RIGHT ANGLE ROSETTE ADAPTER TO 1/4H-20 WITH LOCATING PINS
Using Tilta Nucleus Nano II Control Handle (WLC-T05-CH) as an example. It can be installed onto the Tilts Lightweight Shoulder Rig (TA-LSR) via the Right Angle Rosette Adapter to 1/4″-20 with Locating Pins.
1 Align the adapter with the (1) 1/4″-20 thread with locating points on
the handle. Tighten (2) the tie down screw.
2 Install the adapter with the handle to (3) the rosette on the shoulder
rig. Tighten (4) the tie down screw.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>