GT-F5 Ultrasonic Cleaner User Manual
- June 17, 2024
- GT Sonic
Table of Contents
GT-F5 Ultrasonic Cleaner
Specifications
- Product name: Ultrasonic cleaner
- Tank size: 150x90x50mm (LxWxH)
- Ultrasonic frequency: 43kHz
- Overall size: 206x145x133mm (LxWxH)
- Capacity: 600ml
- Timer: 180s-280s-380s-480s-90s
Product Usage Instructions
Overview
Note: Check that all accessories are present and undamaged.
Safety measures
- DANGER of electric shock due to moisture.
- DANGER of electric shock.
- Points of use:
Job application
- Jewellery: necklaces, rings, earrings, bracelets, etc.
- Glasses and watches: glasses, watch chains, waterproof watches, etc.
- Commodities: shaving heads, razor blades, dentures, combs, toothbrushes, etc.
- Metal items/tableware: watch parts, coins, spoons, forks, etc.
- Paper products: pen heads, printer heads, injection cartridges, seals, etc.
Working principle
Ultrasonic cleaning uses cavitation bubbles caused by high-frequency pressure (sound) waves to set a liquid in motion. Stirring causes large forces on contaminants that adhere to substrates such as metals, plastics, glass, rubber, and ceramics. This action also penetrates through blind holes, cracks, and recesses.
Operation manual
-
Open the lid and fill the stainless steel tank with water.
WARNING: Running without water can damage the device! -
Put the objects in the water. The items must be completely submerged. Do not exceed the MAX* level.
-
Close the lid and connect the power cord to an electrical outlet.
-
Press the On/Off button to start the standard 180s working time. The blue indicator lights up. Press the Time button to choose different working times for 180s, 280s, 380s, 480s and 90s. When the time is up, the timer will display the standard time or the set time and the device will stop working automatically.
-
Please note: a buzzing sound can be heard during cleaning. This means that the device is working.
-
If you want to stop cleaning during the set working time, simply press the power button again.
Methods of use
Thorough cleaning: To achieve a better cleaning effect, you can add a few drops of universal detergent.
FAQ
- Q: What is the capacity of the tank?
- A: The tank has a capacity of 600ml.
- Q: How long does the timer allow for cleaning?
- A: The timer allows for cleaning times of 180s, 280s, 380s, 480s, and 90s.
- Q: Can I use this ultrasonic cleaner for cleaning jewellery?
- A: Yes, you can use this ultrasonic cleaner to clean jewellery such as necklaces, rings, earrings, bracelets, etc.
Thank you for purchasing the ultrasonic cleaner. Please take the time to read these operating instructions before use and retain them ‘for future reference. Failure to follow these instructions may lead to personal injury and property damage.
OVERVIEW
Note: Check if all accessories are included and undamaged.
SPECIFICATIONS
Product| Ultrasonic Cleaner| Model No.| ****
GT-F 5
---|---|---|---
Ultrasonic Power| 35W| Ultrasonic Frequency| 43kHz
Tank Size
| ****
150 x 90 x 50mm
(LxWx H)
| ****
Overall Size
| ****
206 x 145 x 133mm
(LxWxH)
Timer| 180S-280S-380S-480S-90S| Capacity| 600ml
SAFETY PRECAUTIONS
Keep it away from children
- Do not place the cleaner near a heat source or source of ignition.
- This device is not intended to be used by individuals with restricted physical sensory or mental capacities or those with a lack of experience or knowledge, including children, unless they are supervised by an individual who is responsible for their safety or has received training in operating the device.
- Cleaning and user maintenance shall not be carried out by children without supervision.
- Store the device and accessories where it is not reachable by children.
- Children must not play with packaging material.
- Do not allow children to play with bags.
- The danger of suffocation.
DANGER of electric shock as a result of moisture
- Do not use this device in the vicinity of bathtubs, showers, washbasins or other vessels containing water.
- Never put the device down in such a way that it could fall into the water while still connected.
- Protect the device from moisture, dripping water or splash water.
- Never touch the device with the wet hands.
- The device, the cable and the mains plug must not fall into water or other liquids.
- If the device has fallen into the water, pull out the mains plug immediately, and only then remove the device from the water. Do not use the device again, but have it checked by a specialist.
DANGER of electric shock
- Do not operate the device if it or the cable shows visible signs of damage or if the device has been dropped.
- Only connect the mains plug to a properly installed socket, which is easily accessible and supplies voltage matching the rating plate. The socket must still be easily accessible after connection.
- Ensure that the cable is not damaged by sharp edges or hot surfaces. Do not wrap the cable around the device (cable break danger!).
- Make sure the cable is not trapped or crushed.
- Unplug the device after cleaning.
- Remove the mains plug from the socket, when after each use, if a fault occurs, when you are not using the device, before cleaning the device and during thunderstorms.
- To avoid any risk, do not make any changes to the device or accessories.
- Do not replace the cable by yourself. Maintenance must only be carried out by a specialized company.
WARNING! Risk of material damage
- Use the original accessories only.
- Never place the device on hot surfaces or near heat sources or open fire. Place the device on a dry and even surface.
- Do not place the device on a soft surface that might cover the openings.
- Do not operate the device when the tank is empty.
Dry running will damage the device.
- Do not start the device without water in a tank.
- When adding water, make sure not to exceed the “Max” line.
- Do not run the device for an extended time or continuously.
- Do not expose the device to temperatures below 10 °C or above +40°C.
Usage Points
- Do not add corrosive chemical solvents to the cleaning tank to avoid corrosion.
- Do not use alcohol, gasoline or other flammable liquid, otherwise it may cause fire or explosion, and the damage caused is not covered by the warranty.
- Do not turn on the cleaner when there is no water in the cleaning tank. Running without water may damage the device.
- When adding water, make sure that the water covers cleaning items and does not exceed the “MAX” mark.
- When putting the items, please take them lightly.
APPLICATION
- Jewellery: necklace, rings, earrings, bracelets etc.
- Glasses and timepieces: eyeglasses, watch chains, waterproof watches etc. Commodities: shaver heads, razor blades, dentures, combs, toothbrushes etc. Metal articles/dishware: watch parts, coins, spoons, forks etc.
- Stationery: pen-heads, printer-heads, inject cartridges, seals etc.
WORKING PRINCIPLE
Ultrasonic cleaning uses cavitation bubbles induced by high-frequency pressure (sound) waves to agitate a liquid. The agitation produces high forces on contaminants adhering to substrates like metals, plastics, glass, rubber, and ceramics. This action also penetrates blind holes, cracks, and recesses.
OPERATION GUIDE
-
Open the lid and fill the stainless steel tank with water.
WARNING: Running without water may damage the device! -
Put the items in the water. The items should be completely immersed. Do not exceed the “MAX” level.
-
Close the lid, and connect the power cord to an outlet.
-
Press the “On/Off’ button to start the default 180s working time, the blue indicator lights up.
-
Press the “Time” button to choose different working times for 180s, 280s, 380s, 480s and 90s. When the time is up, the timer will display the default time or set time and the device stops working automatically.
Note: while cleaning, a buzzing sound will be heard. This means the device is working. -
If you would like to stop cleaning during set working time, simply press the “on/off” button again.
METHODS OF USE
General cleaning
Use normal water for general cleaning. The items should be completely
immersed. However, the water should not exceed the max line.
Thorough cleaning
To achieve a better cleaning effect, you may add a few drops of universal
detergent.
We recommend using commercial dishwashing detergent-preferably without a
lipid-replenishing substance (“balm”)
- For professional cleaning purposes, special cleaning detergents can be used. Find out which concentrate is suitable for your items to be cleaned and the type of contamination.
Partial cleaning
- For the partial cleaning of bigger items, use the device with its lid open.
- Do not touch the liquid during the operation!
Ultra cleaning
- When the items require extensive cleaning, use
- “Thorough Cleaning” procedure first, replace the water and repeat the “Thorough Cleaning” process until the items are completely clean.
CARE AND MAINTENANCE
DANGER! Before cleaning the device, unplug the device. Never immerse the device, cable or power plug in water or another liquid for cleaning and care purposes.
- Use a piece of cloth to clean and dry the tank.
- Ensure that no residual water is left in the tank to prevent limescale.
- Store the device in a cool and dry place.
- Keep the device out of children’s reach.
- Check the joint of the power plug and cord.
- Do not impact, hit the device. Handle with care when moving the device.
WARRANTY
This product is warranted for one(1) year from the date of purchase. If there are any faults in workmanship or malfunction, please contact our distributors, agents or our after-sales service department, and do not repair it by nonprofessionals.
