User Manual MZX017
AL Evolution 2.0 headphone
FCCID: 2AL9B-MZX017

MZX017 Bluetooth Headphone

IMPORTANT
PLEASE DO NOT RETURN TO STORE
If You’re Having Trouble, We’re Here to Help!
Call us 24/7 at 1-855-292-4087
E-mail us at alsupport@sakar.com or visit us at alteclansing.com

WELCOME
Thank you for purchasing an Altec Lansing product. Download our App to unlock all the features our oroducts have to offer!

http://qr.w69b.com/g/tztAzkR1u

In the Box

A Closer Look

1. Power/Play/Pause/Answer
2. Previous Track/Volume –
3. Next Track/Volume +
4. ANC
5. Charging Port
6. LED Indicator Light
7. Auxiliary Port
8. Microphone

Charging

Connect the USB-C cable into the charging port to charge the headphone.
The headphone’s indicator will turn red while charging and turn off when it is fully charged.

Powering On

To turn on the headphone, press and hold the power button for 2-3s. The LED will blink Blue indicates that the headphone has entered into Bluetooth pairing mode. REGISTER YOUR PRODUCT
To receive news, exclusive deals, OTA or firmware updates, warranty information and more please register your product at alteclansingsupport.com

follow us
@alteclansingofficial
follow us
@alteclansing
follow us
@alteclansingofficial
12 Month Limited Warranty
All Altec Lansing products come with
12 month limited warranty
from the date of its original purchase
24 Hour Customer Support
We love our customers, and we care about your experience with Altec
Lansing. If you need assistance, please call us at 1.855.292.4087
or e-mail alsupport@sakar.com
www.alteclansing.com
Altec Lansing Edison,NJ 08817

Bluetooth Pairing

Once the headphone is on, look up for “AL Nanophone ANC2.0” in your smart device’s Bluetooth pairing list. The headphone LED light will turn into solid Blue, indicating that the headphone is now connected successfully.

Controls

1. Next track / Volume +
2. Power/Play/Pause/Answer
3. Previous track / Volume –

the music. Press again to resume playing the music.
Accept/End/Reject Call| When receive an incoming call, press the multi- function button to accept call, press again to end call. Press and hold the button for 2s to reject the incoming call.
Voice Assistant| Press and hold the multi-function button for is to activate other voice assistant.
Volume control| Tap the +’ button to increase the volume. Tap the-‘ button to decrease the volume.
Next / Previous track| Press and hold the +’ button for is to advance to the next track. Press and hold the-‘ button for is to return to the previous track.

Notes

To use voice assistant, you must have a phone that is equipped with a voice assistant.
You must be within Bluetooth range to use voice assistant via your headphone.
Your headphone’s voice assistant feature will not work if a voice assistant is not first enabled within the settings on the phone. For more information, see your phone’s user manual.
For additional user materials and warranty information, please visit alteclansing.com

FCCID: 2AL9B-MZX5501
Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FOLLOW US ON

myalteclansing

FCC Radiation Exposure Statement:

The device has been evaluated to meet general RF exposure requirement.
The device can be used in the portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>