FURRION DV7100 Entertainment System Instruction Manual

**Instruction Manual

Entertainment System
**

Locations and Names of the Controls

Common operation:

1. To turn the unit on/off .
   When the unit is power Off, it may be switched On by pressing POWER button.When the unit is switched On, press and hold POWER button for more than 1 second to switch the power off.

2. To select function mode
   Press the AUX,DVD,AM/FM,HDMI,USB,BT button on the front panel to select corresponding mode.

3. To adjust the volume level
   Press the VOLUME + or VOLUME – button on the front panel to adjust volume level during playback.

4. To mute or resume sound
   Press MUTE button to eliminate or resume sound immediately during playback.

5. To set sound mode and menu
   Press and hold SEL button for more than 2 seconds to turn on BASS, then press SEL button shortly and repeatedly to select TRE(treble), LIR(balance),EQ OFF( FLAT/CLASSIC/ROCK/POP), LOUD OFF/LOUD ON, VOL LAST/VOL DEFA(AVOL) , BEEP ON/BEEP OFF,DX/LOCAL(in RADIO mode),STEREO/MONO(in RADIO mode),SUBW ON /SUBW OFF,AMERICA3/AUSTRIA/EUROPE(in RADIO mode) in the sequence and circulation.

After selecting a desired item, use VOLUME+/- button to set.

1. BEEP ON/BEEP OFF
   BEEP ON mode: The beep is generated when any key is pressed.
   BEEP OFF mode: The beep sound is disabled.

2. VOL LAST/VOL DEFA
   VOL LAST: The volume level when switching off will be restored with power On.
   VOL DEFA: The volume level of the main unit after power on is a constant value.

Radio Operation:

1. To select radio band
   Press AM/FM button briefly and repeatedly to select a desired radio band in sequence and circulation as follows: –>FM1–>FM2–>FM3–>AM1–>AM2–> .

2. To search for radio station manually or automatically
   Press >>| or |<< button briefly to manual tune up/down for your desired radio stations step by step.
   Press and hold >>| or |<< button for 2 seconds to automatically tune up/down for a radio station of strong signal.

3. To store current station or turn on a preset one

1. If you want to store currently station, press and hold the AM/FM button until the frequency flashes, then press briefly one of the 6 number buttons to store the current station in the preset memory bank of the number button for the current band.In this  way the unit can store 30 preset stations.
2. Press one of the 6 number buttons briefly to turn on the preset station stored in the preset memory bank of the number button for the current band.

4. To auto search and store for the strongest stations
   When pressing and holding 2/STOP button on the front panel for more than 2seconds, the radio searches from the
   current frequency and checks the signal strength level until the 6 strongest stations are found. And then the 6
   strongest stations are preset to the corresponding preset memory numbered bank. The auto-storage operation is
   implemented in the each selected band. When the auto-storage operation is finished, the radio executes preset scan.

5. To set the frequency
   Press and hold SEL button for more than 2 seconds to turn on BASS, then press SEL button shortly and repeatedly until displays one of the area AMERICA3,AUSTRALIA or EUROPE, then use the VOLUME+/- button to selection and briefly press the SEL  button for your confirmation.

USB Operation

1. To insert or pull out USB stick
   When needing to playback USB music, insert USB stick into the USB socket, then the playing mode will be changed into USB mode and display “USB” on the LCD.

2. Press the or button briefly to play previous or next track.

3. To play fast forward or backward
   Press and hold or button to play backward or fast forward.

4. To play previous or next 10th track.
   Press 5 or 6 button to play previous or next 10th track.

5. How to use 1/PLAY/PAUSE button
   During playback, press 1/PLAY/PAUSE button to pause playback. When in pause mode, press 1/PLAY/PAUSE button to play again. Press and hold 1/PLAY/PAUSE button to select the first track for playback.

6. To repeat track(s)
   During playback, press 3/RPT button briefly to play the current track repeatedly, and the LCD will display RPT ONE.
   Press RPT button twice to play the tracks in the Album repeatedly, and the LCD will display RPT DIR.
   Press RPT button thrice to RPT ALL tracks, and the LCD will display RPT ALL.
   Press RPT button four times to cancel RPT function , and the LCD will display RPT OFF.

7. To play tracks in random
   During playback, press RDM button briefly to play all tracks in random. Press it again to cancel RDM function.

8. Tracks search
   Press USB button, it will activate TRACK SEARCH mode . The LCD will display TRK 0/00/000(deside on the total number of tracks in the SD card or USB stick) and flash the 0 on the biggest digit position. Then use the VOLUME +/- button to select a  number on the flashing digit position from 0 ~ 9. Then press USB button to confirm the number and flash the 0 on next smaller digit position. With the same means, select the number on the flashing digit position with VOLUME +/- button. After finishing  selecting the numbers on all digits position, press 1/PLAY/PAUSE button to play the track of the selected serial number.

Bluetooth Handsfree System:

1. Pairing
   Turn on Bluetooth mode of mobile phone, then select the function of Finding Bluetooth Device and enter it. After finishing the finding, it will show the name of Bluetooth Device FURRION DV7100-XXXX (where X can be any character A-Z or number 0-9)  , select it and enter it, (for some phones it maybe need a password, In case of this situation please Input the password 0000),then the unite will display “BT LINK”.

2. Use mobile phone to do connection or disconnection

1. In connection status, find the paired and connected Bluetooth Device, then press the disconnection button to do disconnection.
2. In disconnection status, find the paired and disconnected Bluetooth Device, then press the connection button to do connection

3. In connection status: Mobile phone transfers to car audio player whenever a dialing takes place; Mobile phone transfers to car audio player whenever receiving a call.

4. Dialing when in connection status
   After the device has been paired successfully and DV7100 screen displays BT LINK, Dial with mobile phone directly.

5. Accept/ Reject/ End
   A) During ringing, press TEL button to accept the call.
   B) During ringing, press HANG UP button to reject the call.
   C) During talking, press HANG UP button to end the call.
   Note: During ringing, CALL IN appears and then the phone number.

6. Talking volume level setting
   While in talking, use VOLUME +/- button to adjust volume level, but this volume level can not be saved.

7. Dialing or receiving calls while the unit is in sleep mode(when your phone is paired),
   When the Stereo is in sleep mode (Acc on and standby), to execute a dialing(with mobile phone) or receiving a call, the Stereo will temporarily wake up.

8. To play an audio file from a external Bluetooth device(mobile phone) on the DV7100
   After the device has been paired successfully and the DV7100 screen displays BT LINK. If your mobile device supports A2DP you will then be able to stream music from your Bluetooth device so it can be played by stereo speaker.You must select on your  mobile Bluetooth device to play the audio through Bluetooth.If your mobile device supports AVRCP then you will be able to control the basic phone audio output functions by the DV7100 controls. Eg.Play Pause.

9. To setup your Stereo using NFC(only support mobile phone with NFC function)

1. Turn on the NFC function of your mobile phone and make sure the screen is active and unlocked.
2. With the NFC detection area of your phone touch with the NFC detection area of the Stereo, you can connect or disconnect your mobile phone with the Stereo conveniently.
   Note: For the first time pair and connect, it will ask you to input a password. The password is “0000”.

APP FUNCTION(Both support IOS system and Android system):

1. APP Installation.
   Another way to control the unit instead of using the front panel or remote control, you can use your phone. You will need to install the “Es Control” app onto your mobile device.The app will need to be downloaded from Google Play (Android phone) or App  Store(iPhone). Do a search for “Es Control” and proceed to download. Install per the app instructions.

2. Open the BT function of your smart phone and pair with the Stereo.

3. Under BT connection,tap the “Es Control” icon to enter the APP connection interface,then select the name “FURRION DV7100-XXXX”(Android phone) or “DV7100-4.0-XXXX”(iPhone) to enter it. (where X can be any character A-Z or number 0-9 )

4. Use the APP to control the Stereo freely.
   

Preferences

Supported Audio Format

File Extension| Audio Codec| Bit Rate| Sampling Rate| Remark
.mp3| MP3| 16kbps – 320kbps| 8k – 48kHz|
. wma| WMA| –
16kbps 320kbps| –
8k 48kHz| WMA only support WMA7/WMA8/WMA9 (CBR/VBR) (only support 353 format)

Note: Reading the above file formats is not guaranteed.

Wiring Diagram

Wiring connecting socket view

Mounting Installation

Location

• Choose a mounting location away from humid areas, water sources, appliances or any equipment that can radiate heat.
• Select an area on a wall or cabinet which is free from cable, fuel or brake lines and ensure the area behind the DV7100 has a vent hole or if it is an enclosed box and has adequate room around the rear of the unit for cooling.
• Ensure when the stereo is mounted in the cut out that the wires at the rear of the unit are not pressed against the heat sink.
  Installing the unit.
• Before finally installing the unit, connect the wiring temporarily and make sure the unit and the system work properly.
  *Fix the unit with screw according to following diagram.

1. Remove plastic frame of the front panel from the unit.
2. Fix the unit with 4 pieces #8 pan head self tapping screw.
3. Put back plastic frame of the front panel to the unit.

Specification

Specification
GENERAL
Supply Voltage                                                             DC 12V
Current Consumption                                                   Max.5A
Power Output
20W RMS
Number of channels
STEREO channels.
Unit Dimensions| DC 12V
Current Consumption
Max.5A
Power Output
2x 20W RMS
Number of channels 2 STEREO channels.
Unit Dimensions  (L X W X H):  130X 113 X 86 (mm)
---|---
FM SECTION
Frequency range|  87.5Mhz – 108Mhz (Europe)
87.5 Mhz – 107.9Mhz(U.S.A.)
87.5 Mhz – 108Mhz(Australia)
Effective sensitivity| 3uV.
I.F Frequency| 10.7MHz.
AM SECTION
Frequency range| 522Khz – 1620Khz(Europe)
530khz – 1710Khz(U.S.A.)
522 Khz – 1710Khz(Australia)
Effective sensitivity| 40dB
I.F Frequency| 450KHz
Preamp Output| 1 V Output
USB PLAYBACK| MP3 audio system
System| 20Hz -100Hz <=5dB
Frequency characteristics| 20Hz -100Hz <=5dB

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>