Akko MODOO7 Mechanical Keyboard User Manual

User Manual

Thank you for supporting AKKO
To provide you with a better user experience, please read this manual carefully before using the product.

Packing List

System Requirement
Windows®XP / Vista / 7 / 8 / 10 or higher version
USB Connection
Connect the keyboard to your computer by plugging in the USB cable into an available USB port to start using it.
MOD007B PC Multi-modes RGB User Manua

secondsand  then turns off
Bluetooth device 2| LED for Key R| Blue lght  blinks slowly| Blue light blnks fast| Blue lght  stays on for 2
secondsand  then turns off
Bluetooth device 3| LED for Key T| Yellow light blinks slowly| Yelow  lght blinks fast| Yellow light stays on for 2
secondsand  then turns off
2.4G wireless device| LED for Key Y| Green light blinks slowy| Green light blinks fast| Green light stays on for 2
secondsand  then turns off
Wired mode| LED for Key U| N/A| N/A| White light stays on for 2
secondsand  then turns off
Status| Indicator| Indicating mode
---|---|---
Low Battery| Independent LED Indicator (near spacebar)| Red ght  blnks  slowly
Charging| Steady red
Fully Charged| Light off
Caps| LED for Caps Key| Steady whte
Lock Win| LED for left Win Key| Steady white

MOD007B PC HotKeys

MOD007B PC System Commands (Windows)

Lock Windows Key
Press Fn and Left Win Key
Restore Factory Settings
Hold down Fn and press ~ Key for 5s
Revert Ctrl into Menu Key
Hold down Fn and press right Ctrl for 3s

MOD007B PC System Commands (Mac)

Right Alt Command

MOD007B PC Backlight Settings

MOD007B PC Wireless/Wired Connection Guide

Middle: Default Windows (built-in power supply off)
Bottom: Windows (built-in power supply on)

Bluetooth Pairing

After turning on the keyboard, press Fn+E/R/T to enter Bluetooth mode. Press and hold the Fn+E/R/T combination key for 3 seconds to put the keyboard in pairing mode, with the red/blue/yellow indicator light flashing quickly. Once the connection is established, the indicator light will stay on for 2 seconds. If the device fails to connect, the indicator light will turn off and the keyboard will enter sleep mode.

2.4 G Pairing
After turning on the keyboard, press Fn+Y to enter 2.4G mode. Then press and hold the Fn+Y combination key for 3 seconds to enter pairing mode. Then insert the receiver, and the indicator light will flash quickly. Once pairing is successful, the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indiactor will turn off and the keyboard will enter sleep mode.
Battery Level Check
Press the Fn + Space combination keys to check the battery level. If the battery level is below 30%, the space key will show a red light. If it’s between 30-50%, the space key will show an orange light. If it’s between 50-70%, the space key will show a purple light. If it’s between 70-90%, the space key will show a yellow light. If it’s 90-100%, the space key will show a green light.

Key/Lighting Effects Customization Instruction

1. The driver can be connected and lighting and key can be customized under the three working modes of the keyboard
2. The three working modes of the keyboard can be matched to drive the music rhythm
3. Please download the Akko Cloud driver on our website
4. Users can download the driver via en.akkogear.com

AKKO Warranty and Service Statement

1. Akko provides One-Year warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.

2. If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard by themselves.
   However, users shall take full responsibility for any loss happened during self-repair.

3. Defects resulting from disassembly of our product, improper usage and incorrect installation arenot covered by warranty.

4. The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.

Company: Shenzhen Yinchen Technology Co., Ltd
Address: 33 Langbi Rd, Bitou Community 1st Industrial Zone, Bao’an District, Shenzhen, China
Tel: 0755-23216420
Website: www.akkogear.com
Origin: Shenzhen, China Made in China
Precautions
Man-made damage is not limited to mmersion, falling off, and pulling off the wires with excessive forces, etc

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

www.akkogear.com @akkogearhttp://weixin.qq.com/r/aDtOVoXE6tiVrcE19256http://qr.weibo.cn/g/49ssmq

References

• Akko | Designer for Mechanical Keyboards
• Akko艾酷官方网站 | 潮流时尚外设_Akko机械键盘官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>