ADOSEWING 32 Pairs Large Picture Hanging Strips Heavy Duty User Manual

ADOSEWING 32 Pairs Large Picture Hanging Strips Heavy Duty

Product Specifications

• Smooth Release Paper: Used to protect the adhesive side
• Foam Adhesive Side: Provides a strong and secure attachment to the wall
• Hook Side (Hook Surface): Allows for hanging frames or other items
• Loop Side (Fur Surface): Provides a surface for the hook side to stick to

Product Usage Instructions

Preparation

1. Wipe the wall with rubbing alcohol to ensure it is clean and dry.
2. Take out the purchased product.

Attaching the Hook and Loop Strips

1. Take out the hook strips (hook surface).
2. Take out the loop strips (fur surface).
3. Two hook strips (hook surface) cannot stick to each other, and two loop strips (fur surface) cannot stick to each other.
4. Fit one hook strip (hook surface) and one loop strip (fur surface) together and pinch them tightly.
5. Tear off the smooth release paper on one backside of the strips.
6. Attach the strip side without the release paper tightly to the photo frame and press it down for 30 seconds.
7. Peel the smooth-release paper on the other backside of the strips.
8. Apply firm pressure to the frame against the wall for at least 60 seconds to ensure a secure and sturdy attachment.

Frame Removal Instructions

1. Gently lift the picture frame so that the hook side and the loop side are separate from each other.
2. Carefully support the adhesive strip.
3. Slowly peel vertically along the wall.

Tips for Decorating a Photo Wall

• Nine-Grid Photo Wall
• Staircase Photo Wall
• Mirror Reflection Photo Wall
• Spiral Photo Wall

NOTE

1. Please do not hang valuable and fragile items, precious souvenirs, or any dangerous items. Do not place hanging items above seats, beds, or any valuable items to avoid falling off due to improper use, causing danger.
2. If you paint the wall, please wait at least one month until the paint is dry before using this product.
3. Some latex paint walls may peel off due to their own aging.
   Please check the surface condition carefully before use.

Product Detail

A Multi-Purpose Adhesive Solution for All Types of Walls

Quick and Easy Wall Frame Hanging Guide

1. Wipe the wall with rubbing alcohol, and keep it dry and clean.
2. Take out the product you purchased
3. Take out the hook strips (hook surface)
4. Take out the loop strips (fur surface)
5. Two hook strips(hook surface) can not stick to each other
6. Two loop strips (fur surface) can not stick to each other
7. Take out one loop strip(fur surface) and one hook strip(hook surface)
8. Fit the hook surface（hook side) and fur surface(loop side) together and pinch them tightly
9. Tear off the smooth-release paper on the one backside
10. Attach the strip side without the release paper tightly to the photo frame and press it down for 30s.
11. Peel the smooth-release paper on the other back
12. Apply firm pressure to the frame against the wall for at least 60 seconds to ensure a secure and sturdy attachment.

FAQ (Frequently Asked Questions)

Q: Can I reuse the hook and loop strips?

A: No, the hook and loop strips are designed for one-time use only. Once removed, they may not provide the same level of adhesion if reused.

Q: Can I use these strips on wallpaper?

A: It is not recommended to use the hook and loop strips on wallpaper as they may damage the surface or cause the wallpaper to peel off.

Q: How much weight can these strips hold?

A: The weight capacity of the strips depends on various factors such as the surface condition and the size of the strips used. It is recommended to follow the weight guidelines provided by the manufacturer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>