MOJOGEAR MG-L03 Magnetic Mini Video Light User Manual
- June 17, 2024
- MOJOGEAR
Table of Contents
User Manual Magnetic Mini Video Light
Instructions
- Please read this product manual carefully.
- Keep this product manual. Always include this product manual when passing the products on to third parties.
- Heed all warnings and follow all instructions in this product manual.
WARNING
chemicals to protect the product from corrosion, corrosion may cause the
product to malfunction.
-
Use only a microfiber and dry cloth for cleaning the product.
-
Operate carefully to not cause any damage by dropping or physical shocking it.
-
Do not leave the product in excessive heat, high temperatures can cause the product to malfunction.
-
Please have the product checked by the authorized service or agent if your product has some problems. Please note that this warranty does not apply to repair arising out of the malfunction of unauthorized disassembly, although you may request such repairs on a chargeable basis.
-
Use of original Vloglite cable accessories is recommended.
Please note that this warranty does not apply to repairs arising out of the malfunction of non-original Vloglite accessories, although you may request such repairs on a chargeable basis. -
The productis certificated by ROHS and CE. Please operate the product in full compliance with the operation standards.
Please note that this warranty does not apply to repair arising from malfunction, although you may request such repairs ona chargeable basis. -
The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given if the design and specifications change.
Packing List:
Product Overview:
Installation and Operations:
-
Power Switch Button
— Long press the on/off button for 3 seconds to switch on/off.
In standby mode, short press the on/off button to adjust the brightness, there are (high, medium and iow) three gears. -
Color Temperature Adjustment
-
Installation and Use
1.Wipe the surface of the phone or phone case with alcohol wipes.| 2.Remove
the protective film on the iron sheet.
---|---
3.Paste the iron sheet onto the back surface of phone or phone case’s.|
4.Adsorbed the LED light to the iron sheet.
1.Wipe the surface of the LED light’ s back with alcohol wipes, and attach the
suction cup clip to the back of the LED light.| 2.Clip the suction cup clip
and LED light onthe mobile phone.
Note: iPhone 12 series and above models can directly adsorb the magnetic fill light on the back of the phone.
Product specification
LED Beads| White 18pcs
Yellow 18pcs| Working Time| maximum brightness>35min
minimum brightness>6omin
---|---|---|---
Voltage| 3.7V| CRI| >95
Power| 2W| Brightness| 500LUX / 0.3 m
Battery capacity| 300mAh| Light Angle| 120°
Color Temperature| 2500K-9000K| Product Size| 57*10mm
- The data of the light is on the base of average, slight difference shall exist among different lights.
MOJOGEAR develops high-quality products for smartphone filmmakers, mobile
creators and everyone else who wants to get the most out of their phone or
camera. MOJOGEAR is proudly based in The Netherlands.
All MOJOGEAR products are covered by a 2-year warranty.
If you have any questions or feedback, please let us know at
support@mojogear.eu. We’d love to hear from you!