HUSQVARNA ST 121E Snow Blower Instruction Manual
- June 17, 2024
- Husqvarna
Table of Contents
HUSQVARNA ST 121E Snow Blower
Product Information
Specifications
- Model Number: ST 121E
- Product Number: 961 83 00-01
- MFG. ID. Number: 96183000101
Illustrated Parts List
The product consists of several assemblies:
- Auger Assembly
- Chute Assembly
- Handle Assembly
Auger Assembly
The Auger Assembly includes the following parts:
| Key No. | Part No. | Description |
|---|---|---|
| 1 | 532 44 27-59 | Blade Bearing Support |
| 2 | 580 85 55-01 | Ball Bearing Retaining Ring |
| 3 | 532 43 76-22 | 1/4-20 X 3/8 Hex Screw |
Chute Assembly
The Chute Assembly includes the following parts:
| Key No. | Part No. | Description |
|---|---|---|
| 1 | 532 43 76-55 | Chute (Black) |
| 2 | 532 43 76-43 | Deflector (Black) |
| 3 | 873 97 05-00 | Nut Lock Hex W/Ins 5/16-18 UNC |
Handle Assembly
The Handle Assembly includes the following parts:
| Key No. | Part No. | Description |
|---|---|---|
| 1 | 532 44 27-75 | RH LED SUBASM |
| 2 | 532 44 27-76 | LH LED SUBASM |
| 3 | 581 00 88-01 | Shroud Control ASM |
Product Usage Instructions
Auger Assembly
- Ensure the snow thrower is turned off and disconnected from the power source.
- Locate the Auger Assembly section of the snow thrower. Refer to the Illustrated Parts List for the specific part numbers and descriptions.
- Using the appropriate tools, remove any damaged or worn parts.
- Install the new parts according to their respective positions and orientations.
- Tighten all screws, bolts, and nuts securely.
- Ensure all parts are properly aligned and functioning before operating the snow thrower.
Chute Assembly
- Ensure the snow thrower is turned off and disconnected from the power source.
- Locate the Chute Assembly section of the snow thrower. Refer to the Illustrated Parts List for the specific part numbers and descriptions.
- Using the appropriate tools, remove any damaged or worn parts.
- Install the new parts according to their respective positions and orientations.
- Tighten all screws, bolts, and nuts securely. Ensure all parts are properly aligned and functioning before operating the snow thrower.
Handle Assembly
- Ensure the snow thrower is turned off and disconnected from the power source.
- Locate the Handle Assembly section of the snow thrower.
- Refer to the Illustrated Parts List for the specific part numbers and descriptions.
- Using the appropriate tools, remove any damaged or worn parts.
- Install the new parts according to their respective positions and orientations.
- Tighten all screws, bolts, and nuts securely.
- Ensure all parts are properly aligned and functioning before operating the snow thrower.
FAQ
Q: What are the unit dimensions?
All component dimensions are given in U.S. inches. 1 inch = 25.4 mm.
Q: Can I use non-OEM replacement parts?
No, it is important to use only Original Equipment Manufacturer (O.E.M.)
replacement parts. Failure to do so could be hazardous, damage your snow
thrower, and void your warranty.
- MODEL NUMBER ST 121E
- PRODUCT NUMBER 961 83 00-01
- MFG. ID. NUMBER 96183000101
REPAIR PARTS SNOW THROWER – – MODEL NUMBER ST 121E (96183000101)
AUGER ASSEMBLY
CHUTE ASSEMBLY
HANDLE ASSEMBLY
DRIVE ASSEMBLY
ENGINE ASSEMBLY
FRAME ASSEMBLY
SHROUD ASSEMBLY
COMPLETE ENGINE-442159
NOTE
All component dimensions are given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT
Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your
warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>