iCruise 19940 Reclining Wheelchair User Manual
- June 16, 2024
- iCruise
Table of Contents
iCruise 19940 Reclining Wheelchair
Product Information
Product Usage Instructions
Section 1: Unpacking and Assembly
To ensure a smooth assembly process, follow the steps below:
- Remove all packaging materials and carefully inspect the contents to ensure everything is included.
- Identify the different components and parts of the product as indicated in the user manual.
- Follow the provided assembly instructions to put together the wheelchair.
- Tighten all screws, bolts, and nuts to ensure stability.
- Double-check all connections and make sure everything is securely fastened.
Section 2: Adjustments and Customization
Follow the instructions below to adjust and customize the wheelchair according to your needs:
- Seat Width: Measure the width of the user’s hips and adjust the seat width accordingly using the provided adjustment mechanism.
- Seat Depth: Measure the length from the back of the user’s buttocks to the back of their knee. Adjust the seat depth accordingly using the provided adjustment mechanism.
- Back Height: Measure the height from the user’s buttocks to the top of their shoulders. Adjust the backrest height accordingly using the provided adjustment mechanism.
- Floor-to-Seat Height: Measure the desired height from the floor to the seat and adjust using the provided adjustment mechanism.
Section 3: Safe Operation
To ensure safe operation when using the wheelchair, follow these guidelines:
- Always lock the brakes before transferring in or out of the wheelchair.
- Avoid exceeding the weight capacity specified for the wheelchair.
- Check all moving parts regularly for any signs of wear or damage.
- Keep the wheelchair clean and free from obstructions that may affect its performance.
- Use caution when navigating uneven surfaces or inclines.
FAQ
- Q: What is the weight capacity of the wheelchair?
- A : The weight capacity of the wheelchair is 250 lbs.
- Q: Can I adjust the seat width and depth?
- A : Yes, the wheelchair allows adjustments for both seat width and depth to provide a comfortable fit for the user.
- Q: How do I fold the wheelchair for storage or transportation?
- A: To fold the wheelchair, follow these steps:
- Ensure the wheelchair is on a flat surface.
- Release any locking mechanisms or latches holding the frame together.
WHEELCHAIR OVERVIEW
- Reclining back with Neck Support Cushion
- Detachable Padded Armrest
- Detachable, Swing-Away and Elevated Leg rest
- Deluxe padded vinyl upholstery with heavy duty inner, flame retardant and mildew resistant.
- 8″ front casters with solid rubber tires, aluminum front forks adjustable in three positions.
- 24″ Composite Mag wheels
- Push-to-lock wheel locks
- Anti-Tipper wheels
- Steel side panels
CAUTION
- Stability – The iCruise Wheelchair is designed to be safe and stable as long as center of gravity is maintained while going about normal activities. Care must be taken while performing activities that shift your center of gravity in the chair. Never reach so far that require you to shift in the seat or bend over out of the chair. When you have to reach for objects that require you to lean, be certain front casters are pointing in a forward position that extends the wheelbase and will stabilize the chair.
- Ramps – Be sure of your own capabilities, limitations and strength before attempting to go up a ramp. Correct techniques on ramp negotiation should be shown to you by a qualified professional. Assistance is recommended when going up or down inclines greater than 8°. If you must stop on an incline, avoid sudden, abrupt movement when you resume movement. Because of the backward angle of the chair, sudden abrupt movement could cause instability. Attempting to use the wheel lock brakes could result in accidental locking, tipping to one side, or cause a sudden stop. Avoid changing direction when going down an incline, as this could result in instability of tipping over.
LIMITED WARRANTY
- Your product is warrantied to be free of defects in materials and workmanship for three years of the original consumer purchaser.
- This device was built to exacting standards and carefully inspected prior to shipment. This 3 year Limited Warranty is an expression of our confidence in the materials and workmanship of our products and our assurance to the consumer of years of dependable service.
- This warranty does not cover device failure due to owner misuse or negligence, or normal wear and tear.
- The warranty does not extend to non-durable components, such as rubber accessories, casters, and grips, which are subject to normal wear and need periodic replacement.
USE AND SAFETY
- TO OPEN CHAIR – Open wheelchair by tilting to one side and pushing down on seat rail until fully opened.
- TO CLOSE/FOLD CHAIR – First fold foot plates to vertical position. Grab seat with both hands at front and back edge and lift. Or, tilt chair to one side and lift up on the seat rail.
- REMOVABLE ARMS – Remove arms by depressing spring button and lifting arms out of front and rear sockets.
ATTACHING THE FOOT RESTS/LEG RESTS – Position a foot rest so its pointing 90 degrees away from the reclining chair (footrest platform should be pointing forward when folded down at this point). Align the holes with the foot rest pegs on the frame and gently press down until the footrest can swing freely. Swing the foot rest until the foot rest platform is pointing inward. Continue with this rotation until the foot rest locks in place. You will hear it click in place. Repeat these steps for the other footrest.
-
ADJUSTING LENGTH OF FOOTREST/LEG REST – When adjusting length of foot rests or leg rests, user should be sitting in a wheelchair with feet on the footplates. Loosen bolt on the clamp around support assembly. Raise or lower foot plate to desired position that will provide maximum support of thighs. Front rigging should not be so low that it causes uncomfortable pressure to the thighs at front of seat upholstery. Footrest should not be lower than 2 ½”‘ from the ground to ensure clearance.
-
ADJUSTING/ELEVATING LEG REST – Lift foot plate on leg rest assembly to desired position. Release leg rest assembly and it will automatically lock into place. To lower push out on leg rest lever and lower foot plate desired position.
-
REMOVING THE ELEVATED LEG RESTS – Release lock by pushing on the front rigging lever. Swing-away foot rest / leg rest out and sideways and lift to remove.
-
REMOVAL OF SWING-AWAY FOOT RESTS/LEG RESTS – Release lock by pushing on the front rigging lever. Swing-away foot rest /leg rest out and sideways. Lift to remove.
-
- WHEEL LOCKS – Engage both wheel locks before getting in or out of chair, leaning forward in chair, or while in an elevator or wheelchair lift. Proper adjustment of wheel lock is at least 1/8″ when locked. Locks are engaged by pushing handle completely forward. Adjustments to locks are made by loosening or tightening nut on the carriage bolt. Embed lock shoe at least 1/8″ by sliding clamp toward rear wheel while handle disengaged in locked position. Tighten nut and bolt to secure in position. Test for correct locking action before actual use.
-
ANTI-TIPPER WHEELS INSTALLATION – Press the release buttons and remove the anti-tippers from the wheelchair frame. Reinsert the anti-tippers with the wheels curved down towards the ground until they lock back into place. Press the release buttons on the lower portion of the anti-tipper and slideit up or down to achieve a 1 ½” – 2″ ground clearance. Make sure both anti-tippers are adjusted to the same setting and release buttons are fully engaged before use.
MAINTENANCE AND CARE
-
FRONT CASTERS – Casters should be checked periodically and lubricated occasionally. Lubricate by removing fork and greasing caster stem bearings. Lubricate wheel bearings by removing wheel from fork. Reassemble fork and wheel by tightening nuts until no play remains, but wheels roll freely. If nut is too loose, caster will shimmy, if too tight, chair will be hard to steer.
-
WHEELS – Large rear wheels should be inspected at least once a month to ensure proper tightness. If the wheel wobbles or is loose, release lock nut and tighten axle bolt slightly. Test for proper tightness by leaning the chair to one side and spin-adjusted wheel.
-
TIRES – Solid rubber tires need minimal maintenance, but should be cleaned occasionally with a damp cloth. Replace if tires become severely worn or cracking appears.
-
GENERAL CARE – Wipe chrome parts with a clean, soft cloth at least once a week. All metal parts can be cleaned with auto wax or similar products. If exposed to moisture, dry immediately. Do not use an abrasive cleanser that will scratch the finish.
WARNING
- Do not attempt to adjust or operate a wheelchair without reading carefully all instructions in this manual.
- This wheelchair has not been approved as a seat that can be used within vehicles of any kind. Always transfer wheelchair user to a vehicle manufacturer’s approved seat and use safety restraints available.
- Do not operate this wheelchair on roadways, streets or any surfaces with vehicular traffic.
- Do not attempt to operate on inclines 10% or greater without proper assistance.
- Be sure to completely engage wheel locks when getting in and out of a wheelchair or when in an elevator or
- wheelchair lift. The wheelchair should be on a smooth, stable and level area with wheel locks engaged before transferring user in or out of wheelchair.
- Do not adjust footrests any lower than 2 ½” from floor. When getting in or out of a wheelchair, do not stand on or apply weight to foot rests.
- Before reaching or leaning forward, rotate the casters to front of the wheelchair and engage wheel locks to help prevent the wheelchair from tipping over.
- Do not lean over or apply weight to the top of the wheelchair back. This can cause the wheelchair to tip over.
- When trying to extend arms over back, only reach as far as your arm can extend without having to alter your seating position.
- Do not stand on the wheelchair.
- Do not use wheel locks to slow your descent down an incline.
- Abruptly changing directions while going down an incline could cause instability or possible tipping over.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>