JUKI PLC-2710NV Walking Foot Machine Instruction Manual
- June 16, 2024
- JUKI
Table of Contents
JUKI PLC-2710NV Walking Foot Machine
Specifications
- Model: PLC-2710NV
- Sewing Speed: Max. 2,500 sti/min
- Stitch Length: Max. 12 mm
- Needle: Refer to 10. SEWING SPEED TABLE in the Instruction Manual for the standard model.
- Applicable Thread Size for Sewing: #30 to #0 (US: #46 to #266, Europe: 60/3 to 10/3)
- Applicable Thread Size to be Cut: #30 to #0 (US: #46 to #266, Europe: 60/3 to 10/3)
- Motor: AC servo motor
- Presser Foot Pressure Control : Electronic control
- Horizontal Feed Control: Electronic control
- Alternate Vertical Feed Control : Electronic control
- Lubricating Oil: JUKI New Defrix Oil No. 1 (equivalent to ISO standard VG7) or JUKI MACHINE OIL No. 7
- Number of Patterns: Sewing pattern – 99 patterns (For the polygonal shape sewing, as many as 10 patterns can be registered.)
- Cycle Sewing Pattern – 9 patterns
- Custom-pitch Pattern – 20 patterns
- Condensation Custom Pattern – 9 patterns
Noise
- Equivalent Continuous Emission Sound Pressure Level (LpA) at the workstation: A-weighted value of 83.5 dB; (Includes KpA = 2.5 dB); according to ISO 10821- C.6.2 – ISO 11204 GR2 at 2,500 sti/min.
- Sound Power Level (LWA): A-weighted value of 90.5 dB; (Includes KWA = 2.5 dB); according to ISO 10821- C.6.2 – ISO 3744 GR2 at 2,500 sti/min.
Threading the Machine Head
WARNING: To protect against possible personal injury due to the abrupt start of the machine, be sure to start the following work after turning the power off and ascertaining that the motor is at rest. Thread the machine head following the order as illustrated in the figure. If you want to perform thread trimming at a position where no material exists, it is necessary to change the thread guide with the suitable thread guide. The thread guide to be used instead of the current one is supplied with the unit as an accessory. Part number of replacement thread guide: 40034675
Specifications
PLC-2710NVS70BBZ
| Item | Application |
|---|---|
| Model | PLC-2710NV |
| Sewing speed | Max. 2,500 sti/min |
Refer to “10. SEWING SPEED TABLE”
in the Instruction Manual for the standard model.
Stitch length| Max. 12 mm
Needle| SCHMETZ 134×35 (Nm 125 to Nm 200) (Standard: Nm 140)
Applicable thread size for sewing| #30 to #0 (US: #46 to #266, Europe: 60/3 to
10/3)
Applicable thread size to be cut| #30 to #0 (US: #46 to #266, Europe: 60/3 to
10/3)
Motor| AC servo motor
Presser foot pressure control| Electronic control
Horizontal feed control| Electronic control
Alternate vertical feed control| Electronic control
Lubricating oil| JUKI New Defrix Oil No. 1 (equivalent to ISO standard VG7) or
JUKI MACHINE OIL No. 7
Number of patterns| Sewing pattern…………………………. 99 patterns (For the polygonal
shape sewing,
as many as 10 patterns can be registered.) Cycle sewing pattern………………… 9 patterns
Custom-pitch pattern………………… 20 patterns
Condensation custom pattern…… 9 patterns
Noise| – Equivalent continuous emission sound pressure level (LpA) at the workstation:
A-weighted value of 83.5 dB; (Includes KpA = 2.5 dB); according to ISO 10821- C.6.2 – ISO 11204 GR2 at 2,500 sti/min.
– Sound power level (LWA);
A-weighted value of 90.5 dB; (Includes KWA = 2.5 dB); according to ISO 10821- C.6.2 – ISO 3744 GR2 at 2,500 sti/min.
Threading the machine head
WARNING :
To protect against possible personal injury due to the abrupt start of the
machine, be sure to start the following work after turning the power off and
ascertaining that the motor is at rest.
Thread the machine head following the order as illustrated in the figure.
If you want to perform thread trimming at a position where no material exists,
it is necessary to change thread guide ⓭ with the suitable thread guide. The
thread guide to be used instead of the current one is supplied with the unit
as an accessory.
Part number of replacement thread guide: 40034675
CAUTION
This Instruction Manual for the PLC-2710NV only describes their differences from the stan-dard models (PLC-2710V). For safety-related information, carefully read and fully understand “Safety precautions” described in the Instruction Manual for the standard models before using your sewing machine.